Used Turn Mill Center for sale (23,479)

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Bsdpfx Afjy S Dfuekewn

Condition: used, Year of construction: 2015, turning diameter 250 mm Bwodpfx Aoy Ralnofkon turning length 600 mm control FANUC Series 31i-Model A total power requirement 23 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, Swing diameter over bed: 550 mm Max. machining length: 428 mm Max. machining diameter: 300 mm Spindle bore: 62 mm Bar machining: 51 mm Spindle nose: A2-6 Motor spindle speed range: 35 - 5000 rpm X-axis travel: 210 mm Z-axis travel: 561 mm Tool changer for powered tools: 12 Tool changer locking: hydraulic Tool changer drive: servo Tool change time: 0.2 seconds Tool holder: cross-section 25 mm Max. speed of powered tools: 5000 rpm Max. power of powered tools: 5 kW Max. milling capacity, shank cutter: 16 mm Max. milling capacity, cutter head: 50 mm Max. drilling capacity: 16 mm Max. threading capacity: M16x2 Rapid traverse rate, Z-axis: 30 m/min Rapid traverse rate, X-axis: 30 m/min Positioning accuracy: 0.008 mm Repeatability: 0.003 mm Tailstock: programmable Arbor mount: Morse taper 4 Tailstock travel including quill travel: 565 mm Hydraulic unit tank capacity: 20 L Hydraulic unit pump output: 1.5 kW Hydraulic unit nominal pressure: 3.5 - 6 MPa Central lubrication tank capacity: 2 L Central lubrication output: 25 W Coolant tank capacity: 130 L Coolant pump output: 25 W Continuous motor power: 11 kW 400 V 50 Hz Short-term motor power (30 min): 15 kW 400 V 50 Hz Bwodpsy S R Tlsfx Afksn Weight: 4,000.00 kg Dimensions: 2600 x 1685 x 1768 mm Machine scope of delivery: Coolant system, extraction system with filter, tool changer for 12 powered tools, 200 mm hydraulic chuck, Siemens 828D control, 17" touchscreen, programmable tailstock, Renishaw measuring arm, chip conveyor, German operating manuals, CE declaration of conformity.

Condition: used, Year of construction: 1993, functionality: fully functional, Traub CNC lathe TNS26DG, TX8F, year of manufacture 1993 • 2x 12-station turrets with rotating tool drive VDI25 • C-axis on main/sub spindle • 163E on main spindle, 161E on sub spindle • Chip conveyor, bar feeder DN26 • Spare parts catalog, electrical diagram, ATC optics Ex site, directly from production By arrangement, approx. 2-3 weeks after order 100% payment before loading Without any warranty. Ex location/dismantled, as inspected and tested. Subject to prior sale. Bwodpfxey D I Svj Afken

Condition: good (used), Year of construction: 2011, 1 x CNC turning center Chiah Chyun CB-32 M Bjdpfx Ajzakriefkjwn Year of manufacture: 2011 with chip conveyor Technical data can be found in the document. A total of 3 machines are available. The machines can still be inspected in operation and under power for approximately 3 weeks.

Condition: used, Year of construction: 2005, machine/vehicle number: ZT151AEG0163, CNC control MORI SEIKI MSX-501, 2 turrets each with 16 tool stations, driven tools, 2 spindles, bar capacity 52 mm, max. speed 6,000 rpm, max. turning diameter 190 mm, max. turning length 450 mm, Y-axis +/- 40 mm, machine weight 5,100 kg, chip conveyor Bsdpfx Afey Sqhpskjwn

Condition: good (used), Year of construction: 2021, functionality: fully functional, Machine has 920 spindle hours. Mori Seiki NLX 2000 turning/milling center, year of manufacture 2021, Celos 730 UM / Mapps control system, X/Z travel 260 / 590 mm, Y-axis +/- 50 mm, bar diameter up to 65 mm, main spindle with C-axis, spindle speed up to 5,000 rpm, 12-station BMT turret, driven tools, NC steady rest, Bwjdpfx Afjy Ti Uwsksn tailstock, tailstock spindle speed up to 6,000 rpm, chip conveyor, high-pressure cooling system, oil mist separator, manually adjustable tool pre-setter, swiveling inside the machine, part catcher for main and tailstock spindles, Irco short bar loader ILS, gear hobbing, gear skiving.

Condition: good (used), Year of construction: 2023, Spinner TC 600, Year of manufacture 2023, Fanuc 32 i TB control system, Travel range X/Z 275/700 mm, Chip conveyor, Tailstock, 16-position turret, Bodey Thmlepfx Afkewn VDI 40, C-axis, Powered tool holders, 3-jaw chuck Ø 250 mm.

Condition: excellent (used), Year of construction: 2024, 3 axes, C-axis with rotating tools Features: Maximum turning diameter over the bed: 400 mm Maximum turning diameter over the cross slide: 330 mm Bar capacity: Ø 51 mm Spindle nose: A2-6 Spindle bore: 65 mm Spindle speed: up to 4500 rpm Spindle motor power: 11/15 kW Spindle bearing diameter: 100 mm X-axis travel: 180 mm Y-axis travel: +/- 40 mm Z-axis travel: 600 mm Bodpfx Afjyzfgxokewn Rapid traverse: 24 m/min Number of tools in the turret: 12 stations Tailstock travel: 500 mm Sleeve travel: 60 mm Sleeve diameter: 60 mm Taper: MT#4 Bed inclination: 30° Guide type: prismatic slides Machine weight: approximately 4000 kg Dimensions: 3525 (with conveyor) x 1851 x H2020 mm Standard equipment Automatic lubrication system Coolant system Halogen work light Chip conveyor (chain type) Programmable hydraulic tailstock SMW Autoblock 3-jaw chuck Ø 175 mm 6 fixed tool holders Electronic handwheel Siemens 828D CNC control Videos available

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N Bwedpfx Afjt U R Hzsken rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Distance between chucks: 625 mm Bwedpjy Hk Niofx Afksn Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Bwjdjy Hk E Repfx Afksn Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm Bwodpfx Afey Hg S Hokon X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 195125, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, overall weight: 5,040 kg, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling capabilities, as well as integrated B- and Y-axes, this machine is particularly suitable for demanding precision parts in medical technology, mechanical engineering, and precision mechanics. The machine was built in 2007 and is equipped with the powerful MAZATROL Matrix control unit, allowing for both conversational and ISO programming, and offering modern features for efficient and productive manufacturing. Technical Data at a Glance: • Travel range: 410 mm on the X-axis, 140 mm on the Y-axis (±70 mm), and 570 mm on the Z-axis. The B-axis features a swiveling range of 225°, enabling complex five-sided machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. • Maximum turning and swing diameter: 545 mm each. • The main spindle reaches speeds up to 6,000 rpm with a power output of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle operates at speeds up to 12,000 rpm with approx. 5.5 kW of power output, making it ideal for milling, drilling, and tapping operations. • The machine is equipped with a tool changer (included), allowing a maximum tool length of 210 mm, as well as a KM tool holder system which ensures high rigidity and fast tool changes. Equipment includes: • Chip conveyor • “Tool Eye” tool measurement system Bwodpfx Aoyir I Rjfkjn With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility—ideal for cost-effective complete machining in modern production environments. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control system; Thermal sensors for maximum precision; Y-axis; Subspindle with collet chuck; Spindle bore 80 mm (main spindle); All axes with box ways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders included; Robot loading by Halter available upon request! Photo attached. Bjdpfxoy R S Uzj Afkjwn An automatic door can be retrofitted for this purpose. In Germany, complete commissioning upon request. All at additional cost!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Bedpfxsy Sfx Nj Afkjwn Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Bwodpfxjy Edc He Afkjn Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: good (used), Year of construction: 2006, Max cutting diameter 420mm, 750mm swing, max cutting length 1524mm, 102mm bar capacity, 3300rpm spindle, 4000rpm milling, 12 station turret, 30kW motor power, 3 jaw chuck, Mazatrol 640T Nexus control, Bwodpfjyt H Tvsx Afksn 0.001 degree C axis, tool setter, tailstock, swarf conveyor

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel Bwedpfx Ajwulzvefkjn

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Bwodjy Ixxbepfx Afkjn Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Bjdpjy Ivyijfx Afkswn Conveyor belt Oil mist separator Chip conveyor without bar feeder

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. Bwedpfx Ajx E Dncefken EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: good (used), Year of construction: 2001, turning length: 1,020 mm, turning diameter: 540 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 565 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,077 mm, overall weight: 12,500 kg, 🛠️ Description For sale is a powerful CNC turning and milling center, MORI SEIKI MT 2000SZ, with a subspindle and Y-axis. ⚙️ Technical Data Control: MSX-501 Travel X / Y / Z: approx. 565 / 160 / 1,077 mm Max. turning diameter: approx. 540 mm Max. turning length: approx. 1,020 mm Main spindle: up to approx. 4,500 rpm Tool spindle: up to approx. 8,000 rpm Tool holder: Capto C6 Tool positions: depending on the configuration Axes: X, Y, Z + subspindle ⏱️ Operating Data Spindle: operating hours: approx. 33,600 h Machining time: approx. 14,200 h Subspindle: operating hours: approx. 18,100 h Machining time: approx. 11,500 h (further data see pictures) 📦 Equipment Subspindle (SZ version) Powered tools Y-axis Chip conveyor Coolant system Multitasking function (turning & milling) 📌 Condition The machine is in used, functional condition. Tool holders (turning tools and Capto) are included in the scope of delivery. Cutting inserts are not included. 🚛 Delivery & Conditions Bwjdpfjy Sm U Sox Afkon Sale is ex works / free loading Dismantling and loading can be arranged upon request Sale without warranty 📞 Contact If you are interested or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Bwodjy H Ebtjpfx Afkon Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 673 mm, turning diameter: 313 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 75 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 2,123 mm, total length: 3,257 mm, total width: 2,312 mm, spindle nose: 6, overall weight: 8,118 kg, spindle diameter: 250 mm, CNC Fanuc 31i TURNING SWING DIAMETER Over guide cover: 673 mm WORKING AREA Chuck size: 250 mm Bar capacity: 65 mm Maximum turning diameter: 313,7 mm Maximum turning length: 520,7 mm MAIN SPINDLE Maximum spindle speed: 4.000 rpm Maximum motor power: 26 kW Maximum torque: 421 Nm Base spindle speed: 590 rpm Spindle nose: A2-6 / 25C Spindle bore: 75 mm Maximum 3-jaw chuck size: 250 mm Spindle orientation: 1° SUB-SPINDLE Maximum spindle speed: 5.000 rpm Maximum torque: 347 Nm Base spindle speed: 420 rpm Maximum motor power: 11 kW Spindle nose: A2-6 / 20C Chuck size: 200 mm Bar capacity: 51 mm Spindle bore: 60,4 mm Spindle orientation: 1° Maximum stroke: 638 mm Maximum rapid traverse: 38 m/min Maximum distance between sub-spindle and main spindle: 654,1 mm COOLANT SYSTEM Tank capacity: 254 L Maximum pressure: 13,8 bar High-pressure coolant through turret: 68,95 bar ADDITIONAL FEATURES Resolution: 0,0001 mm Machine length: 3.257 mm Machine depth: 2.312.4 mm Machine height: 2.123 mm Machine weight: 8.118 kg Machine equipped with: • SUPER-PRECISION® certification • Air blast on main spindle • 20C collet spindle • Custom Macro B programming • Reinforced HARCRETE® machine base • Grease lubrication on all axes • Optical scales on X, Y and Z axes • 12-bar through-tool coolant system • Parts counter and operating hours counter Bjdszbicvopfx Afkjwn • Axis resolution: 0.00010 mm • Maintenance kit • Manual Guide i (programming system) • Rigid tapping (without compensation holder) • Laser measurement system with Renishaw ball probe • Live tooling, Y-axis and 20C sub-spindle option Configuration includes: • Sub-spindle • 12-station BMT-55 tool turret with live tooling drive • C-axis on both main spindle and sub-spindle • Y-axis • Optical scale on Y-axis • Ready To Cut option (Warm-up Cycle – Automatic Start) • MARPOSS workpiece probe for BMT-55 • MARPOSS tool setter • Workpiece presence detection in the sub-spindle • Chip conveyor – discharge on the right-hand side of the machine (interface included) • High-pressure coolant system • Spindle reduction sleeve kit • Operating and maintenance manuals and CE Declaration of Conformity