Used Turning Station for sale (11,570)

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PW2000-003, total height: 1,300 mm, empty load weight: 1,310 kg, load capacity: 2,000 kg, total length: 2,600 mm, total width: 1,800 mm, table width: 900 mm, input voltage: 400 V, working height: 1,100 mm, table length: 1,400 mm, Dimensions LxWxH: approx. 2600 x 1800 x 1300 mm Load capacity: 2,000 kg The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is at the bottom during swiveling, the load-bearing steel profiles are angled upward by 90° to securely hold the plate being turned even in a vertical position during a 90° rotation. Both tables are positioned opposite each other and are swiveled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing base frame, with one table fixed in place and the other movable. The movement is performed by hydraulic cylinders which can displace the table mounted on rollers by approx. 300 mm. The base frame also houses the hydraulic and electrical components. A hydraulic power unit is used as the drive source, supplying oil to the cylinders in response to control commands. The respective valves are actuated electrically and/or hydraulically, initiating and maintaining the required table movements in interaction with each other until the turning process is complete. Particular attention in the design of the hydraulic system is given to operational safety and sensitive switching between pushing and pulling motions. The geometry of the table pivot axes results in changing load effects on the tilt cylinders. The hydraulics are designed to ensure the required performance and prevent overloading the components during normal operation. Suitable filters, in combination with a generously sized tank, ensure high availability of the hydraulic system. The necessary electrical control system is fully integrated into a sheet steel enclosure housing all required components. The core of the control system is a PLC, which processes operating parameters based on the programmed specifications. The emergency stop function and all relays and evaluation units required to operate the functions are also installed. Operation of the turning device is via a control panel featuring a touch panel for entering function parameters, such as Table 1 swivel up, Table 1 swivel down, Table 1 forward, Table 1 back, Table 2 swivel up, Table 2 swivel down, as well as automatic start/stop. Giedoyr I Dtjpfx Adbsp To prevent table collision in manual mode, the PLC programming ensures this by using table position and tilt data. After resolving an emergency stop, the PLC control independently completes the turning process. The turning device is equipped with heavy-duty castors, making it mobile. We have several of these devices in daily operation. This unit is unused.

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Gjdpfjydigmex Adbeip Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm Gedjx Irzvspfx Adbeip spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Giedpfewv Tqbox Adbep Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: used, weight max. 60 t workpiece diameter 6000 mm gear diameter 680 mm gear width 230 mm Distance of shafts 900-3500 mm axis height 550 mm weight of the machine ca. 4,5 (9 ) t Load capacity per piece 30 t load-carrying along 60 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gsdpsytx Irsfx Adbsip If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2018, operating hours: 3,666 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle nose: A2-8, overall weight: 5,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is operational and set up in our showroom, and can be inspected by appointment! This DMG MORI CLX 450 V3 comes standard with: - 19" SlimLine PLC with TouchScreen. - Siemens electronic handwheel. - Chip conveyor. - High-pressure pump (12 bar). - Unused 3-jaw chuck (SMW AUTOBLOK KNCS-N-260-78 Ø260). - Various VDI-40 tool holders (static). - MARPOSS measuring arm incl. calibration holder (VDI-40). - Mechanical preparation for mist extraction unit. - Double foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar) - Original DMG documentation. - Set of chemical anchors. Giedeyh Inhopfx Adbjp

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Gedpfx Aex T Dhlodbsip Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: new, weight max. 1000 kg workpiece diameter 20-800 mm Gjdpsfv A Afjfx Adbsip connected load frequency 230 V speed 100 - 1000 mm/min total power requirement 0,1 kW weight of the machine ca. 65 kg dimensions of the machine ca. 520x470x390 mm

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Giodpfxoym Nfze Adbep Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Condition: good (used), Year of construction: 2024, Ref. -No.: 10605 Manufacturer: VDF WOHLENBERG Type: E 1000 Year of construction: 2024 Type of control: CNC Control: Sinumerik Storage location: Halberstadt Gisdpeym Nd Dsfx Adbop Country of origin: Germany Machine-No.: 32XX Turning Diameter Over Bed: 1500 mm Turning Diameter Over Slide Rest: 1150 mm Centre Height: 750 mm Centre Distance: 9000 mm Faceplate Diameter: 1000 mm Spindle Bore: 80 mm Spindle Speed Min.: 1,4 - 280 RPM Turning diameter over cross slide: 800 mm Swing diameter over cross slide: 800 mm Space requirement: 13000 x 2650 x 2250 mm Power Capacity: 320 kW Weight Of The Machine Ca.: 8 t Max. turning diameter (in the offset): 2000 mm Size of the inner cone: metr. Kegel 1:20 quill cone: 80 O Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Godpfx Asym Ncyodbsip Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Gisdoym Nbvspfx Adbop Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Giedpeym Na Ssfx Adbep Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Gisdeym I U Ispfx Adbop Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Year of construction: 1999, total height: 2,000 mm, total length: 3,000 mm, total width: 1,800 mm, Empty weight: 4.000 kg Price: On request Driven tools included Barfeeder included - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HT23372E - Drive system: CNC - Control system brand: Yasnac - Power [kW]: 15.0 - Centre height [mm]: 230 - Swing over bed [mm]: 450 - Distance between centres [mm]: 380 - Spindle bore [mm]: 59 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 5000 - Options: Bar feeder, Live tools - Transport dimensions: 3000mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Giodpfswqf I Uex Adbjp Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Manufacture : Volkmann Model : RNT 180 Type: Station for filling and emptying pouches, bags and other packaging. Connection for pneumatic transfer Fine particle extraction system Aspiration : Multi Ejector + Vacuum pump G1800 Pneumatic filter cleaning system Air tank : FESTO CRVZS-2 (capacité 2 L) / Pression max : 16 bar Level probe Opening sensor Side vibrator 100% pneumatic unit Giodpfx Adsyk Invebep 3 filters supplied with the machine

Condition: new, Year of construction: 2025, Protec welding rotary table 5000 Kg load capacity Gedoid Szcopfx Adbsip speed infinitely variable 0,05 - 0,5 rpm manual remote control height 600mm diameter 1500mm Foot remote control extra charge

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotary table Godpfxjfkt Ebj Adbjip Complete set incl. double foot remote control and hand remote control with digital display 5000 Kg load capacity Diameter clamping disc 1500mm Height horizontal 1500mm Height tilted to middle 1500mm Speed infinitely variable from 0.01 to approx. 0.7 rpm Inclination up to 120 length 2100mm width 1500mm

Condition: excellent (used), Year of construction: 2002, Control: Siemens SINUMERIK 840D, C200-4D Gjdpfx Adsyp Icwobsip Spindle speed: 6000 rpm Travel X/Y/Z: 280/280/145 mm Number of turrets: 1 with 6 positions Number of tool stations: 2x4 Chip conveyor Pallet conveyor belt Pallets

Condition: excellent (used), Year of construction: 2021, Mazatrol SMOOTH control unit Max. Swing diameter: 695 mm Max. Machining diameter: 340 mm Max. Bar diameter: 35 mm Turning length: 600 mm Spindle speed 6,000 min-1 Gjdeyp Iaiopfx Adbsip Counter spindle 12-position turret with driven tool Chip conveyor FMB bar feeder SL 80V

Condition: excellent (used), functionality: fully functional, Driven Tools Machine: MORI SEIKI SL2000 Turret Manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request Gedsynb E Nspfx Adbsip 1x→ No. 444-201 Double Turning Tool Holder For main spindle and sub spindle With 1 clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Gjdpfxsv Hyf Ue Adbjip Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg Gisdpfx Ajycu Rusdbep EQUIPMENT Parts catcher Driven tools Tailstock Tool setting probe Dust extraction

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 - DTR - CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm Gjdpfxev N Edbe Adbjip - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - 4-knife head - 3 smooth pulling output rollers - dimensions L/W/H: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed Giedpfx Ajv N Ebasdbep - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg