Used Turret Rewinder for sale (1,962)

Year of construction: 1997, condition: used, X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the machine is currently not operational due to damage to the tool turret, an on-site inspection is possible. Hsdpfxs Agwqts Abuow

Condition: used, Year of construction: 2006, machine/vehicle number: 76005007 06 0006, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 5,250 kg, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used inclined-bed lathe, manufactured in 2006. The manufacturer is Trens in Trenčín (Slovakia), where the machine is known as the SBL 500 CNC. The 12-station turret has 6 driven stations, allowing for drilling and milling operations to be performed in a single setup. It is controlled by a Siemens Sinumerik 810D. The machine is located in the Düsseldorf area and was running during our inspection. TECHNICAL DATA - Year of manufacture: 2006 (according to the nameplate) - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-station, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm - Machine weight: 5,250 kg (nameplate) EQUIPMENT AND ACCESSORIES - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, equipped - Turning and clamping tools - Setup tools Hedpfx Aoz H Udxsbuow CONDITION The machine was running during our inspection on October 1, 2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, where transverse drilling or surface machining is to be carried out at the same time. LOCATION AND PROCESSING The machine is located in the Düsseldorf area. Inspections can be arranged by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact information for forwarding companies in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES - Chip conveyor Knoll 320 S-1 with coolant cleaning - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) - Turning and clamping tools CONDITION Hsdpoz H Ugysfx Abujw During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: used, Year of construction: 1996, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, FIMER COMBINATION FILLING AND CLOSING MACHINE with 9 filling nozzles and 1 corking turret Approximate output: 1500 bottles/hour Hjdpfx Aj Agn Dnsbusw Year: 1996 Cram safety guards 4 units available (dimensions to be verified) Machine has been completely overhauled and comes with a 6-month warranty (excluding electrical parts).

Condition: used, Year of construction: 2011, turning diameter 320 mm turning length 600 mm control Fanuc Oi-TD spindle bore diameter 74 mm number of controlled axis 2 turning speed range 3000 U/min rapid speed 20 m/min number of tapers in turret head 12 direkt tail stock Ja power requirement 15 kW weight 5,0 t dimensions 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis - 3 jaw chuck Ø 250 mm - chip conveyor Hodpsyxr Htofx Abuow - oil dust collector - Tool presetter

Condition: new, Year of construction: 2026, Bore 25 mm number 6 Dimensions (LxWxH) 155 x 140 x 130 mm weight - pallet system 14 kg Two new Toolholder for BMT 65 turret Hedpjy Ehv Rsfx Abusw Price for each toolholder 6x Ø 25 mm bore extern and internal coolant Haas ST- line / BMT 65 for Dooasan, Haas, Hwacheon

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads Hodpfxoxltzvs Abuow  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: used, Year of construction: 2001, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 240 mm, feed length Z-axis: 580 mm, overall weight: 4,100 kg, CNC Turning Machine, 1-Turret Hedpfxezzd I Ss Abujw Manufacturer: Daewoo / Doosan Model: Puma 230A Year of Manufacture: 2001 Serial Number: XXXX Control System: Fanuc 18-T Operating Hours: Unknown Technical Specifications: ----- - Turret: 12 stations, BMT - Spindle Speed: 6,000 rpm max. - Bar Capacity: Ø 45 mm - X-axis Travel: 240 mm - Z-axis Travel: 580 mm - Hydraulic steady rest (following type) - Chip conveyor - Tool measurement system - Machine Weight: 4.2 t - Loading onto a truck is included in the price Accessories: ----- - Documentation - 2x Foot switches - 1x 3-jaw chuck - 1x Collet chuck, Hainbuch - Tool holder set

Condition: used, Year of construction: 2001, Technical details: turning length: 300 mm x-axis: plan: 800 mm longitudinal traverse (z-axis): 300 mm control: Siemens 840D revolution per minute: Hauptantrieb: 20 - 5000 U/min Revolution driven tool (turret): 6000 U/min. revolution per minute: C-Achse: 0 - 100 U/min spindle bore: 79 mm Torque: Hauptantrieb: 200 Nm max. torque on the spindle: 240 Nm max. torque at clamping center: Werkzeugträger: 28 Nm m rapid motion - x-axis: 100 m/min rapid traverse Z-axis: 45 m/min tool turret - number of stations: 12 Stationen / Stations tool taper: VDI 40 Main spindle capacity: 27 / 20 kW spindle hours: 42.400 h operating hours - idle run: 93.728 h electrics - voltage/frequency: 3~ / 400V / 50Hz V/Hz interface: ja total power requirement: 50 kVA Hodpfovamgxox Abusw Weight approx.: 8,0 t dimension machine approx.LxWxH: 3,2 x 3,95 x 2,8 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm Application: This vertical lathe is suitable for 2-axis machining (turning, drilling; milling, Y-axis) of chucked parts. Equipment: -High-pressure coolant unit BMF for 500 liters -Make Bürener chip conveyor with oil mist separator/industrial filter ifs/ IFM 1000CTV (electrostatic extraction) -Workpiece loading and unloading device with/for 20 stations -Power chuck Ø 225mm, foot switch -Clamping surface in the work area: W: 340 x H: 430mm with 7x T-slots according to DIN 650 -Hydraulics -6x various turning tool holders and 2x various tool holders (revolving) *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Hedpfxsv Iplae Abujw Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, Year of construction: 2010, Technical details: spindle passage: 92 mm turning length: 1000 mm z-axis: min.: 404 mm z-axis: max. 1130 mm facing movement (x-axis): min./max.:15 / 335 mm control: Sinumerik SL840D max. torque on the spindle: 2500 Nm tool turret: 12 tools axial Hedpfxowf Nrao Abuow operating pressure: 6,0 bar rapid traverse: 20 m/min total power requirement: 88 kVA dimension machine xH: ca. 4,45 x m dimensions of the bar loader L-W-H: ca. L: 5,7 x B: 2,65 x H: 2,4 m CNC lathe with bar loader - inclined bed lathe -SL 840D control with NCU software 2.6, system software 1.4, store turn software 6.4, with one orientable C-axis, without driven tools -KNCS 260-72 chuck, SMW Autoblok -Clamping force generator via clamping cylinder VNK-200/86 / SMW Autoblok -Measuring system Fa. Heidenhain -Sauter VDI50 tool disk turret, electric drive Bar loaderMaster 80HF, type 33LL: -Dimension round material min./max.: Ø 20mm / 80mm -Minimum length of the workpiece: 33-38-43 to 1000mm -Maximum length of the workpiece: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm -Feed speed (adjustable) 150mm/sec. - Return speed (adjustable) 950mm/sec. -max. offcut length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm -min. remnant 120mm Chip conveyor / hinged belt from Richter, type SP 450/63 -Discharge height = 1000mm, discharge side right Accessories: -div. tool holders VDI 50 -sizing adapter SK50-> VDI 50 -Power chuck Hainbuch Toplus Kombi Ax-zug GR100 -div. sleeves, guide jaws for bar loader Ø 20 - 75mm i.D. *

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 284 mm turning dia. over face-slide: 380 mm turning length: 381 mm x-axis: 153 mm Hodpfx Abezrlvloujw longitudinal traverse (z-axis): 406 mm control: Siemens 810D revolution per minute: 5000 U/min spindle bore: 52 mm tool turret - number of stations: 12 Stationen / Stations operating hours - idle run: 78000 h electrics - voltage/frequency: 400/50 V/Hz total power requirement: 11 kVA Weight approx.: 2,8 t dimension machine approx.LxWxH: 3,0 x 1,6 x 1,8 m The machine is equipped with a C-axis, enabling the use of driven tools. *

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! Hodpfx Aew S Efzjbusw i.D. *

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 340 mm turning dia. over face-slide: 158 mm turning length: 300 mm facing movement (x-axis): 300 mm longitudinal traverse (z-axis): 300 mm control: Siemens 810T revolution per minute: 60 - 4.000 U/min max. torque on the spindle: 106 - 145 Nm external spindle dia. in forward position: 80 mm feed motor: 8500 N rapid motion - x-axis: 6 m/min tool turret - number of stations: 8 Hedeylt Nzepfx Abuew tailstock adjustment: 120 mm Main spindle capacity: 11/15 kW electrics - voltage/frequency: 380/50 V/Hz total power requirement: 20 KVA The EMCO TURN 340 TC is characterized by its compact design, robust machine construction, and proven Siemens control system. It is particularly suitable for companies looking for a reliable CNC lathe for machining small to medium-sized workpieces. It is a compact and robust CNC lathe designed for the precise machining of turned parts in both single-part and series production. The machine is equipped with the proven Siemens Sinumerik 810T CNC control system. *

Condition: used, Technical details: Hodeu Idw Iopfx Abuow number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min Hodpfx Aeu Ixwijbujw tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine approx.LxWxH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: good (used), Year of construction: 1999, 1 MURATEC MT12 CNC lathe Double-spindle, double-turret Year 1999 1 STAUBLI RX90 robot with control center All tooling and tool holders included. Hjdpfxjy Ta Sgo Abuow

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Hjdpfxo Adl N Hs Abuow Speed 5,000 min-1 8-position turret Minimum quantity lubrication

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm Hsdo Afg Tcopfx Abuew - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: good (used), Technical specifications: * Over bed – 270 mm * Center height – 125 mm * Maximum distance between centers – 500 mm * Spindle bore – 28 mm * Collet type B32 * Longitudinal travel of the carriage – 440 mm Hodpfxe Afu Inj Abusw * Cross travel – 130 mm * Travel of the small tool-holding carriage – 90 mm * Travel of the tailstock sleeve – 100 mm Equipment: * 3-jaw chuck, 125 mm diameter * Multifix A turret * 3 Multifix A tool holders * Quick-change tool system * 1 steady rest * 1 rear carriage

Condition: ready for operation (used), Year of construction: 2000, operating hours: 89,307 h, functionality: fully functional, machine/vehicle number: 01180001051, For sale is a powerful and reliable Gildemeister CTX 500E CNC universal lathe in good condition. Thanks to its stable inclined bed design, the machine offers maximum rigidity and excellent precision when machining medium to large workpieces. The machine can be inspected while powered on, by arrangement. Equipment: - Heidenhain control - Single spindle - Three-jaw chuck - 11-position tool turret (partially with driven tools) - Automatic tailstock - Chip conveyor Accessories: - Workbench (4 drawers, 1 door) - Telescopic drawer cabinet Contents: Hand tools, analog/digital measuring instruments Attractive offer – flexible & hassle-free We offer you not only a high-quality product, but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors! Hjdpfj Afph Njx Abuew

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. This machine comes from a factory liquidation and is characterized by its high durability and solid construction. It is ideally suited for precise single-piece and series production. The machine is fully functional and can be inspected while powered on. Equipment: - 3-jaw chuck - 11-position tool turret (some powered tools) - Automatic tailstock Hedpfxs Afpmxo Abusw - Control panel, Heidenhain CNC Pilot control system - Chip conveyor Accessories: - Workbench (5 drawers, 1 door) with partition Contents: Hand tools Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. Upon request, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 150436, turning length: 1,000 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, PINACHO ST-225 Lathe - Center height above bed: approx. 260 mm - Swing over bed: approx. 520 mm - Center height above carriage: 180 mm - Swing over carriage: approx. 360 mm The machine is equipped with a tailstock and an 8-position tool turret, tool holder: VDI 30, including a 3-jaw chuck, diameter: 200 mm FCA D-94227 Zwiesel - loaded onto a truck. Hodps Afup Ssfx Abuew

Condition: good (used), Year of construction: 2005, cycle controlled lathe Machine type: Seiger SLZ 700 x 2000 Control: Heidenhain Year: 2005 Available after: sofort / now SPECIFICATIONS Bed width: 480 mm Max. turning length: 2.000 mm Turningdiameter: 730 mm Umlaufdurchmesser ü. Planschieber / Swing diameter over Face slide: 450 mm Amount of turrets: 1 Tool: Capto C6 mit WTO (Angetriebene WKZ) Axial – Radial ! Equipment Hsdpfx Aj Afm D Uebuow Chip conveyor Steady rest: Ø50 - 300mm Steady rest: mitlaufende 3-jaw chuck: Rota S+ 500-162 Keilstangenfutter mm Bohrstangenhalter

Condition: good (used), Year of construction: 2020, CNC Turning / Millingcenter Machine type: DMG MORI CLX 750 V4 Control: Siemens 840 D solutionline + Shopturn Year: 2020 SPECIFICATIONS Max. turning length: 1.290 mm Turningdiameter: 640 mm Max. swing over bed: ca. 790 mm Main Spindle: SM127 Spindle nose: A2-11 3-jaw chuck: 400 mm (SMW) mm Spindle speeds: 2.000 rpm Spindle power: 46 / 37 kW Torque: 2.000 / 1.600 Nm Partscatcher A left C-Axis: 0,001° Hsdpfx Abs Afm Ereusw Amount of turrets: 1 Tool capacity: 12 Tool: VDI 50 Driven Tools revolution driven tools: 4.000 drive power driven tools : 8 kW X-Axis: 435 mm Y-Axis: 80 +/- mm Z-Axis: 1.290 mm Tailstock Equipment Steady rest: SMW Autoblock dragged bezel support Chip conveyor Tool measurement Direct linear scales Electronical handwheel cooling system: 5-20 bar Chip rinsing pistol Oil mist separator