Used Twin 65 for sale (9,720)

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Pjdpfxsxbhtre Adlopr Shaft, pump: Tempered steel

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2010, Equipment: ABS, Meiller 2-axle tipping trough, MHPS 41/2, roll-on tarpaulin platform, air suspension, lift axle, BPW axles, tires 425/65 R22.5, Wabco SmartBoard, ABS Empty weight 6,120 kg Pedov Hk Hcjpfx Adlspr

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Ideal for plastic drums, crates, bins. Podpfjwxfggsx Adlspr For price contact seller for more information & a video of the machine operating if required.

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm Ppodpfxevuk Szj Adlsr table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m SPECIAL DEAL as is where is, NOT CHECKED WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm Pjdpoxa Epbefx Adljpr - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2014, operating hours: 18,384 h, INDEX ABC 65 Distance between main and sub-spindle: approx. 250 mm Main spindle: - Bore: 65 mm - Max. speed: 6,000 rpm - Power: 25 / 35 kW at 80 / 120 Nm - Chuck diameter: 160 mm - Bearing ISO 702/1 diameter: 140 mm - C-axis Upper turret: - 10 stations - Maximum speed: 12,000 rpm - Power: 7.5 kW at 11.25 Nm - Travels X / Y / Z: 140 / ±50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Lower turret: - 9 stations - Maximum speed: 12,000 rpm - Power: 9 kW at 10 Nm - Travels X / Y / Z: 140 / ±50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Sub-spindle: - Bore: 52 mm - Max. speed: 6,000 rpm - Power: 5 / 9 kW at 10.5 / 20 Nm - Chuck diameter: 110 mm - Traverse X / Y: 140 / 300 mm Pedjymblaspfx Adlopr Backworking units: - 8 units including 5 driven stations - Maximum speed: 12,000 rpm - Power: 6.4 kW at 7 Nm Workpiece and cut handling unit with gripper: - Stroke X: approx. 1,580 mm - Speed: approx. 68 m/min - Rotation angle: approx. 33° - Max. diameter: 65 mm - Max. weight: 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required space including bar loader and coolant/filter unit: approx. L x W x H 11 x 1.5 x 2 m Weight: approx. 7 t Voltage: 400 V / 50 Hz Operating hours: 18,384 h Hydraulic hours: 16,694 h Scope of delivery: - Bar loader INDEX MBL - Coolant filter unit KNOLL KF 150 - Chip conveyor KNOLL 320 S-1/160 - Additional cooling unit KLH SC 8.K2L. MT-00-IND

Condition: used, Year of construction: 2014, operating hours: 9,075 h, INDEX ABC 65 Distance between main and counter spindle: approx. 250 mm Main spindle: - Bore: 65 mm - Maximum speed: 6,000 rpm - Power: 25 / 35 kW at 80 / 120 Nm - Chuck diameter: 160 mm - Bearing ISO 702/1 diameter: 140 mm - C-axis Upper tool turret: - 10 stations - Maximum speed: 12,000 rpm - Power: 7.5 kW at 11.25 Nm - Travel X / Y / Z: 140 / ± 50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Lower tool turret: - 9 stations - Maximum speed: 12,000 rpm - Power: 9 kW at 10 Nm - Travel X / Y / Z: 140 / ± 50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Counter spindle: - Bore: 52 mm - Maximum speed: 6,000 rpm - Power: 5 / 9 kW at 10.5 / 20 Nm - Chuck diameter: 110 mm - Traverse X / Y: 140 / 300 mm Backworking units: - 8 units including 5 driven stations - Maximum speed: 12,000 rpm - Power: 6.4 kW at 7 Nm Workpiece and cut handling unit with gripper: - X stroke approx. 1,580 mm - Speed approx. 68 m/min - Swivel angle approx. 33° - Maximum diameter 65 mm - Max. weight 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required space including bar loader and coolant/filter unit: approx. L x W x H approx. 11 x 1.5 x 2 m Weight: approx. 7 t Voltage: 400 V / 50 Hz Operating hours: 9,075 hrs Hydraulic hours: 16,167 h Ppedoyxbz Hepfx Adler Scope of delivery: - INDEX MBL bar loader - KNOLL KF 150 coolant filter unit - KNOLL 320 S-1/160 chip conveyor - Additional KLH SC 8.K2L. MT-00-IND cooling unit

Condition: used, Year of construction: 2013, operating hours: 30,431 h, INDEX ABC 65 Distance between main and sub spindle: approx. 250 mm Main spindle: Bore diameter: 65 mm Maximum speed: 6,000 rpm Power: 25 / 35 kW at 80 / 120 Nm Ppedpeymbp Sefx Adler Chuck diameter: 160 mm Bearing ISO 702/1 diameter: 140 mm C-axis Upper turret: 10 stations Maximum spindle speed: 12,000 rpm Power: 7.5 kW at 11.25 Nm Travel X / Y / Z: 140 / ± 50 / 300 mm Rapid traverse X / Y: 30 / 50 m/min Lower turret: 9 stations Maximum spindle speed: 12,000 rpm Power: 9 kW at 10 Nm Travel X / Y / Z: 140 / ± 50 / 300 mm Rapid traverse X / Y: 30 / 50 m/min Sub spindle: Bore diameter: 52 mm Maximum speed: 6,000 rpm Power: 5 / 9 kW at 10.5 / 20 Nm Chuck diameter: 110 mm Travel X / Y: 140 / 300 mm Rear machining units: 8 units including 5 driven stations Maximum spindle speed: 12,000 rpm Power: 6.4 kW at 7 Nm Workpiece and part handling unit with gripper: Stroke X approx. 1,580 mm Speed: approx. 68 m/min Rotation angle: approx. 33° Max. diameter: 65 mm Max. weight: 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required space including bar feeder and coolant/filter unit: approx. L x W x H 11 x 1.5 x 2 m Weight: approx. 7 t Voltage: 400 V / 50 Hz Operating hours: 30,431 h Hydraulic hours: 28,806 h Scope of supply: INDEX MBL bar feeder KNOLL KF 150 coolant filter unit KNOLL 320 S-1/160 chip conveyor

Condition: excellent (used), Year of construction: 2002, operating hours: 140 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 2,000 mm, overall weight: 12,000 kg, Equipment: safety light barrier, CNC Punching Machine Boschert TWIN / ROTA – 2023 MANUFACTURER COMPLETE OVERHAUL – EXCELLENT CONDITION For sale is a CNC punching machine Boschert TWIN / ROTA, year 2002, which underwent a comprehensive manufacturer overhaul in 2023. The machine is in exceptional technical condition and is immediately ready for production – ideal for subcontracting or companies with short-term capacity requirements. Pedoy A Sx Dspfx Adlopr --- 🔧 Scope of Overhaul (2023): - Complete refurbishment of all axes - New motors - New wiring - New pneumatic components - Professionally serviced hydraulic system - Control system renewed - New brush tables --- ⚙️ Equipment: - Working area: 1250 x 2000 mm - 1x punching head, 360° rotatable - 1x punching head (fixed) - 8-station Revotool, including tools - Ready for immediate use – no investment required - Only approx. 140 operating hours since overhaul --- 💡 Special Features: The machine was not just serviced but has been thoroughly modernized. All key components have been renewed or overhauled – resulting in a significantly lower failure risk compared to typical used machines. --- 🎯 Ideal for: - Subcontract manufacturing - Small and medium batch production - Companies with urgent production requirements --- 📍 Inspection and test run possible by arrangement. A video of the machine in operation can be provided upon request. If you have any questions or need more information, please feel free to send us a message or give us a call. Sale is carried out under exclusion of any warranty claims. The machine is sold in its current condition (as inspected and tested). Inspection and test run are expressly encouraged.

Condition: used, Rotary vane vacuum pump Single stage Status: Refurbished Warranty: 12 months Manufacturer: Leybold Type: Sogevac SV 65 Cat. No.: 10906 Ppodpfxscnyy Ds Adljr Motor: 400V Operating medium: mineral oil Nominal suction capacity: 65 m³/h Ultimate pressure: approx. 0.08 mbar (abs.) Accessories: Operating instructions, oil filling (mineral oil) Delivery time: ex works

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. Psdpfx Adjw Nyt Iolspr The machine is fully operational and can be inspected during operation.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 10,539 h, load capacity: 4,000 kg, lifting height: 6,500 mm, fuel type: gas, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,315 mm, fork length: 1,600 mm, empty load weight: 7,550 kg, total length: 4,120 mm, drive type: Treibgas, construction width: 2,400 mm, Sideloader Load center of gravity: 800 Fork width: 120 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 27x10-12 Ppedpfx Adov U Erpoljr Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this HX40/16/65. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Heating, full cab, Olatform height: 850 mm

Condition: excellent (used), functionality: fully functional, Balestrini Mini-C 2500mm Linear Copy Milling Machine Model MINI-C Working table length: 2500 mm Two milling units, one per side Milling motor: 2 x 5.5 kW Maximum tool height: 120 mm Heads included Hydraulic table feed, steplessly adjustable Pneumatic clamps for units and material Ppjdpfxjy Ew Ehj Adlsr Number of material clamps: 5 pcs.

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Pedpfxeywr Tdj Adlopr Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Pedpfeym U Inox Adlepr Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Psdpfomrrwfex Adlopr Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: used, mileage: 167,240 km, power: 120 kW (163.15 HP), first registration: 10/2014, fuel type: diesel, number of seats: 17, gearing type: automatic, emission class: euro6, color: blue, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1039 * MB Sprinter 516 * ORIGINAL EVOBUS - TRAVEL 65 * 120 kW / 160 HP – EURO 6 * Automatic transmission * LOW MILEAGE * TELMA retarder * Cruise control * Luggage compartment * Panoramic glazing * 15+1+1 passenger seats: LUX line seating * ALL SEATS EQUIPPED WITH 3-POINT SEAT BELTS * Adjustable seats (recline function) * Passenger compartment air conditioning * Separate driver’s climate control * Armrests * Tables with cup holders * Footrests * Luggage nets * Convector heating * Auxiliary heater * Parking heater * Reversing camera Podpfoxc Sfzex Adlepr * One table installed * Overhead luggage racks * Reading lights * New windscreen * Large luggage compartment * Power outlet in the bus * Refrigerator * Repairs in January 2026: * New injectors for AdBlue * Propshaft renewed * etc. * All information without guarantee * Interim sale reserved * Please refer to our Terms and Conditions

Condition: used, mileage: 167,238 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2014, emission class: euro6, color: blue, number of seats: 17, Equipment: air conditioning, * Our internal reference number: 1039 * Sprinter TRAVEL 65 – ORIGINAL EVOBUS BODY * Automatic transmission * Retarder / Telma * Cruise control * First registration: 10/2014 * 2 x air conditioning units * Driver’s area climate control and passenger compartment climate control * Auxiliary heater and stationary heating * Double glazing * Refrigerator Ppjdexc Sf Ijpfx Adljr * 220 V power outlet * 15+1+1 seats * Footrests * Tables * Multifunction steering wheel * Coach seating, adjustable backward * Reinforced front springs and shock absorbers * Reinforced front stabilizers * Reversing camera * Fog lights * Cruise control * Bi-xenon headlights with cornering function * Driver's seat with armrest * Driver’s seat comfort version * MB MobiloVan with DSG and GgD * Large luggage compartment * Wood-effect flooring * Adjustable air vents * Reading lamps * Fixed price * etc. * All specifications without guarantee * Subject to prior sale * Please refer to our terms and conditions

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm smallest bending radius: 32 mm motor: 30 kW Ppedpfx Asykl Rzjdljr

Condition: used, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, empty load weight: 7,292 kg, Year of construction: 2019, operating hours: 6,410 h, drive type: Diesel, Wheeled Excavator Condition: Ready for operation and fully functional Technical condition: Very good Front tires condition: 40% Rear tires condition: 40% Pedjy Dytfepfx Adljpr Description: Wacker Neuson EW 65 wheeled excavator - Type E14 - Martin POWERTILT - hydraulic quick coupler - 3 trench buckets (30 cm) - 1 grading bucket (1 cm) - 6,410 operating hours (according to the hour meter) - Year of manufacture: 2019 - Full cab, heating, lighting system + AIR CONDITIONING - air-suspended seat - 7,292 kg operating weight - auxiliary hydraulics - 4-cylinder PERKINS turbo diesel engine - Service performed approx. 100 hours ago - excellent original condition - with documents for registration in Austria Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate,

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: AT1379, SPINNER TC600 with travel range X=275mm Z=700mm in 45-degree slant bed design with hardened and ground box ways Configured as SINGLE-SPINDLE LATHE with turret WITH driven tools WITH Y-axis INDEXING TURRET – WITH powered tool stations all tool stations can be driven, servo turret Turret indexing speed adjustable Turret tool interface system BMT45 Pjdpfx Aeyk Al Asdlepr Number of turret stations: 16 SPINDLE 1 version up to 4,000 rpm – 65mm As integrated motor spindle, water-cooled with hydraulic hollow clamping cylinder, 65mm bar capacity, speed range 0–4,000 rpm, Pmax 34 kW / 325 Nm SELF-CENTERING POWER CHUCK by SMW-Autoblok D=250mm, 3-jaw, Model BHD Set of soft jaws, set of hardened top jaws AIR BLAST NOZZLE Spindle 1 CNC CLAMPING FORCE ADJUSTMENT on spindle 1 SPINDLE FLUSHING on spindle 1 FOOT SWITCH CNC TAILSTOCK with integrated bearing movable as CNC axis along the main spindle axis. Programmable tailstock force. FOOT SWITCH for moving the tailstock quill during loading operations DIRECT MEASURING SYSTEM on X-axis Control SIEMENS 840DE with the following standard features: – SPINNER – SPIOS 24" touch control panel for I4.0 applications – Height-adjustable, rotatable and tiltable control panel for optimal ergonomics – incl. engraving cycles – 24" LCD flat color display with multi-touch functionality – 2 GB user memory – 15 zero offset settings – 1 free USB interface – Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on control panel all key setup functions integrated in one control element MULTIFUNCTION HANDHELD OPERATING DEVICE with integrated display SHOPTURN, 4-axis machining, 3D SIMULATION, REMAINING MATERIAL DETECTION, DXF reader Energy-saving function including automatic machine shutdown CHIP CONVEYOR as hinge belt conveyor discharging to the right, incl. integrated coolant tank and conveyor pump HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER PROBE for in-process tool measurement AUTOMATIC DOOR for work area door Universal robot interface UNIROB STANDARD DOCUMENTATION IN GERMAN consisting of machine manual and CNC manuals, supplied in digital form on the control. STANDARD PAINTWORK two-tone in light grey RAL7035 and blue grey RAL5008 Electrical design to EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-wire) Toolholder package Notes: The price includes warranty services only within Germany. For new and demo machines, the pictures are not necessarily those of the specific machine but of similar models. Displayed accessories such as clamping equipment or toolholders are only included as far as listed in the technical description. Please ask for a detailed factory quotation. Visit our factory near Munich or one of our showrooms. We may also have other offers for comparable machines. Intermediate sale expressly reserved.

Condition: new, Year of construction: 2025, machine/vehicle number: FGWPEP38CJSB13562, fuel type: diesel, power: 52 kW (70.70 HP), motor manufacturer: Perkins 1103A-33TG2, General information Field of application: Construction Weights Empty weight: 993 kg Pjdpsv Hk Iasfx Adlspr Functional Generator capacity: 65 kVA CE mark: yes Other information Fuel consumption: 10.2 L/Hour at 75% Load Prime Generator: FG Wilson FGL20080 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 145 l Transport dimensions (LxWxH): 2,291x1,026x1,426 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 52 kW (70.70 HP), motor manufacturer: Perkins 1103A-33T, General information Field of application: Construction Weights Empty weight: 778 kg Functional Generator capacity: 65 kVA CE mark: yes Other information Fuel consumption: 10.2 L/Hour at 75% Load Prime Generator: FG Wilson FGL20080 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 145 l Transport dimensions (LxWxH): 1,68x0,76x1,33 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel Ppedjv Hk H Ajpfx Adlor - Tank

Year of construction: 2006, condition: like new (used), With machine come 5 live tool holders and 5 normal tool holders. Ppodpfslbmy Uox Adlor Parts shown by hand not come.

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Pjdpfxed Dhw Ne Adlopr