Used 65 Y for sale (23,952)

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 650 mm, turning diameter: 250 mm, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, CNC lathe Gildemeister Twin 65Y RG2 Year of manufacture: 2003 Control system: Siemens 840D Type: CNC twin-spindle turning center Main/counter spindle: Yes Turret: 2 × 12 stations Tool holder: VDI 30 Driven tools: Yes Y-axis: Yes (upper turret) C-axes: Main and counter spindle Working area Characteristic Value Max. turning diameter: 250 mm Max. turning length: 650 mm Max. turning diameter over the bed: approx. 340 mm Bar passage: 65 mm Main spindle Characteristic Value Speed: 20–5,000 min⁻¹ Power: 35 kW Torque: 370 Nm C-axis: 0.001° Counter spindle Characteristic Value Speed: 20–5,000 min⁻¹ Power: 35 kW Torque: up to 370 Nm Bar passage: 65 mm C-axis: 0.001° Travel paths Axis Value X1: 300 mm Z1: 650 mm Y: 80 mm (±40 mm) Dwsdpfxozl Dy No Anzja X2: 180 mm Z2: 650 mm Tool turret Number of stations: 12 + 12 Tool holder: VDI 30 Driven tools: 4,000 min⁻¹ Power of tool drive: 11 kW Torque of tool drive: 28 Nm Chip conveyor High-pressure pump Bar loader magazine, manufacturer IRCO, type SiMag 42

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Dwodeyamflepfx Anzoa Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: new, working width: 610 mm, area performance: 2,745 m²/h, overall weight: 208 kg, warranty duration: 12 months, water tank capacity: 55 l, I-DRIVE 65 PROFESSIONAL FLOOR SCRUBBERS - 2745m²/h TECHNICAL DATA: Model: I-Drive 65 Type: Compact Scrubber Series: Professional Condition: NEW Dwsdpfxszkr Dto Anzoa Wheel Drive: Yes Battery Charger Included: Yes Power Supply: Battery Battery Type: 6 i-power 14 Batteries Number of Brushes Included (pcs): 2 Brush Working Width (mm): 610 Squeegee Working Width (mm): 790 Water Tank: Clean / Dirty (l): 55 / 55 Theoretical Area Performance (m²/h): 2745 Weight (kg): 208 I-MOP LITE PROFESSIONAL FLOOR SCRUBBERS FLOORS - 1400m²/h TECHNICAL DATA: Model: I-Mop Lite Type: Compact scrubber Series: Professional Condition: NEW Charger included: Yes Power supply: battery Battery type: i-power 12: 18 V, 12 Ah Number of brushes included (pcs): 2 Brush working width (mm): 370 Squeegee working width (mm): 370 Water tank: clean / dirty (l): 3 / 3 Theoretical surface efficiency (m²/h): 1400 Weight (kg): 16.8 WHY CHOOSE THE I-DRIVE 65 + I-MOP LITE SCRUBBERS The combination of the I-Drive 65 and the I-Mop Lite is a concept developed by I-Team. A 2-in-1 solution – an efficient ride-on scrubber for large areas with the ability to immediately use the compact I-Mop for thorough cleaning in areas inaccessible with a traditional machine. This allows a single operator to thoroughly clean the entire facility without having to change equipment. One machine for multiple surfaces – the I-Drive 65 effectively cleans large, open spaces such as halls, warehouses, shopping malls, and airports. When narrow passages, corners, or under furniture need cleaning, the operator simply removes the I-Mop Lite from the rear handle and continues working without changing positions. ADVANTAGES OF THE I-DRIVE 65 Easy to use - Clear icons and a simple control panel. One-button activation of the brushes and suction system. Automatic fill system - Stops at the fill line, preventing water from splashing or dripping into the battery compartments. Hidden safe - For storing a wallet or phone. Adjustable foot pedal - Easily adjust settings to suit operator preferences. Clear front view while driving. Easy squeegee removal with the push of a button. The ramp can be quickly assembled for loading and unloading. I-MOP LITE BENEFITS Easy to use - Only 4 buttons, no training required. Super lightweight - Improved ergonomics and increased job satisfaction for cleaners. Microban® antibacterial tank - Prevents bacterial growth for long-lasting hygiene and protection. No trip hazard - Operates on portable lithium batteries instead of a long cord. Brushless motor - Low noise and longer runtime. Efficient cleaning of all hard floor surfaces - 500 RPM high-speed brushes.

Condition: good (used), mileage: 460,302 km, power: 176 kW (239.29 HP), first registration: 04/2008, fuel type: diesel, tire size: 265/70R17,5, axle configuration: 4x2, wheelbase: 4,860 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 8, emission class: euro4, suspension: steel-air, total length: 8,700 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 5,200 mm, loading space width: 2,430 mm, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8359 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 140 liters, Tow hitch, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling force: 350 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Flashing lights, Engine power: 176 kW (236 Hp), Fuel: Diesel, Euro: 4, Transmission type: Manual, Gears: 8, Clutch pedal, Power steering, ABS, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Terex 65.2 - A 2 L, Crane year of manufacture: 2008, Crane lifting capacity: 6000, Maximum load: ?, Number of outriggers: 2, CE-certified, Control position: Right-hand side control, Crane position: Behind the cab, Sliding: 2, Hydraulic additional connection: none, Load hook, HYDRAULIC RAMPS // ATLAS 65.2 A2L WITH REMOTE // MANUAL GEARBOX 8+1 // AIRCO // 6 CYL. = Additional Information = Axle configuration Tire size: 265/70R17.5 Brakes: Disc brakes Dwodpfezcvf Tjx Anzoa Axle 1: Steered; Tire tread depth left: 3 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Unladen weight: 8,359 kg Payload: 3,631 kg GVW: 11,990 kg Functional Crane: Terex 65.2 - A 2 L, Year of manufacture 2008, behind the cab Height of loading area: 107 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, mileage: 368,041 km, power: 122 kW (165.87 HP), first registration: 06/2006, fuel type: diesel, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: other, number of seats: 3, total length: 6,800 mm, total width: 2,270 mm, total height: 3,330 mm, loading space length: 4,170 mm, loading space width: 2,130 mm, loading space height: 2,380 mm, Year of construction: 2006, Equipment: ABS, tail-lift, = Additional options and equipment = - Tachograph (control device) - Halogen lamp - None Dwedpfx Aoykyxtenzsa - Tail lift - Manual = Remarks = Configuration: 4x2, twin tires, unladen weight: 4,030 kg, gross weight: 6,500 kg, cab type: single cab, tachograph (control device), parking assistance: none, color: white, lighting type: halogen lamp, engine power: 122 kW (164 hp), fuel: diesel, Euro 3, drive technology: timing chain, transmission type: manual gearbox, gears: 6, power steering, ABS, starter battery, roof rack: none, rear closure: tail lift, seats: 3, seating arrangement: 1+2, seat adjustment: manual, tail lift, tail lift version: rear flap, tail lift capacity: 1,000 kg, tail lift manufacturer: Dhollandia, tail lift material: steel and aluminum, tail lift size: 180x215, 3.0 l loading flap, spare wheel, spare wheel tread: 8% = Additional information = Axle configuration Tire size: 225/75R16 Brakes: disc brakes Axle 1: tire tread left: 1 mm; tire tread right: 4 mm; suspension: trapezoidal suspension Axle 2: twin tires; inner left tire tread: 7 mm; outer left tire tread: 7 mm; inner right tire tread: 7 mm; outer right tire tread: 7 mm; suspension: leaf spring suspension Weights Unladen weight: 4,030 kg Payload: 2,470 kg Gross vehicle weight: 6,500 kg Functionality Tail lift: Dhollandia, rear flap, 1,000 kg Loading platform height: 100 cm Condition General condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification Registration number: KLEYN1

Condition: ready for operation (used), Year of construction: 2014, operating hours: 100 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, total height: 1,800 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, controller model: 31i B, number of axes: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Dodpox D H Sfofx Anzowa Additional equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Displacement system for longitudinal movement Machine Benefits Qualitative Machine Benefits • No spindle reduction required Technical Machine Benefits • Cooling: thermocompensation system • Axes: c-axis and y-axis • System: linear guide system, digital drive system • CATCHING DEVICE Pneumatically operated precast catching device for the gentle unloading of precast elements. The precast elements are transported into a catching box (standard) or onto a conveyor belt (optional). Max. precast element length: 175 mm Max. precast element diameter: 65 mm Max. • Tool system: 12-position tool turret, vdi30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm • Bar length capacity: 1200 – 3200 mm • Diameter passage: 20 – 65 mm • Feed speed: 0 – 627 mm/sec • Turning length is 650mm Extra Information Control Unit Control: Integrated PLC Features: Fully automatic work cycle, Monitoring and error diagnostics (display output) Tools Max Power: 6.7 kW Max Torque: 25 Nm Speed Range: 0–5000 rpm C-Axis: Available Media Power Supply: 200/220/400 V AC Air Requirements: Min. 7 bar Air Consumption: 45 L/min Mount Position (Assembly) Installation Kit includes vibration-absorbing, height-adjustable leveling shoes, and mounting brackets. Machine History Note: Machine like new with only 100 hours of use Dimensions Machine Depth 4500 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, mileage: 410,056 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 12/2014, color: other, number of seats: 17, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Air conditioning for the driver Other - Air conditioning = Additional Information = Height: 280 cm Damage: none = Company Information = Djdpfx Anszd Synszowa We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and has a large parking area that serves as an exhibition space. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs and budget. All information is without guarantee. Errors, prior sale, and typographical errors are subject to change. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily New Vehicle, Stock Vehicle, Immediately Available for Delivery at Special Price / Special Offer - Length: 7618 mm - Width: 2174 mm - Height: 2900 mm - Wheelbase: 4100 mm The base vehicle is extensively equipped, including: - Air suspension - Telma retarder - Additional hot water heater - Automatic air conditioning - 8-speed automatic transmission - GSR systems - Air-cushioned driver's seat with seat heating Interior conversion/modifications as follows: - Thermal and acoustic insulation - Electrically operated external swing door - Webasto RT 145 air conditioning (dual climate control) Dwsdpfxozti Rvj Anzoa - Ceiling duct left and right with service sets - Multi-stage night lighting - Half-level podium/no wheel arch in passenger area - Deepened luggage compartment - 22 passenger seats, GRL, adjustable backwards, with magazine net and folding table - Tour guide seat - USB ports in every passenger row - Clock in passenger compartment Net export possible

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2017, loading space length: 135,000 mm, loading space width: 24,800 mm, loading space height: 27,000 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,910 mm, color: white, Year of construction: 2017, Equipment: tail-lift, = Additional options and accessories = - Air suspension = Further information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg; Steerable Djdpfx Anoy Ipw Ijzowa Unladen weight: 8,420 kg Payload: 21,580 kg GVW: 30,000 kg Tail lift: D'HOLLANDIA DHLM.30, rear door, 2,000 kg Technical condition: good Visual condition: good Registration number: OP-65-YR

Condition: new, functionality: fully functional, power: 47.81 kW (65.00 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 53 l, color: red, empty load weight: 4,000 kg, maximum load weight: 3,700 kg, lifting height: 2,747 mm, number of seats: 1, shovel volume: 0.6 m³, Year of construction: 2026, Equipment: additional headlights, all wheel drive, differential lock, gripper hydraulics, hydraulics, onboard computer, rear pickup, standard shovel, The HZM 816 Profi is the wheel loader for those who don’t want to compromise on demanding lifting and transport tasks. Equipped with a Yunnei 65 hp diesel engine (47.4 kW) with a Bosch common-rail injection system, a tipping load of 2,900 kg, and a lifting height of 2,747 mm, it sets benchmarks in its performance class on construction sites, in agriculture, and in landscaping. As standard, the machine features a 0.6 m³ standard bucket with a Euro attachment. The hydraulic quick-change system allows for tool-free attachment changes from the operator’s seat. The 3rd and 4th hydraulic circuits with continuous pressure function and pressure-free return enable continuous operation of hydraulically powered attachments without any loss of performance. The torque converter transmission with two gears and a powershift function ensures powerful, smooth movements even under heavy loads, and the electrically controlled reversing gear on the joystick enables quick changes in direction without having to move your hand. Rear hydraulics and a 13-pin socket for trailers and electric tools are also included as standard. The cab offers a sprung comfort seat, heating, ventilation, windshield wipers with a washer system, lockable doors, and a rear-view camera. LED lighting with main and work lights, as well as a rotating beacon, ensures good visibility in the dark. An oil cooler ensures stable temperatures during continuous operation, and the floating position allows for precise ground following when pushing and sweeping. The machine is CE-certified according to EU Machinery Directive 2006/42/EC and complies with EN 474. The scope of delivery includes the COC document for road approval. A driver's license of class L (up to 25 km/h) is sufficient for operation on public roads; no driver's license is required on private property. Includes a 2-year manufacturer's warranty. Technical data: Feature Value Engine Yunnei DEF20CDF4, Diesel, Bosch Common Rail Engine power 47.4 kW / 65 hp at 2,400 rpm Max. torque 240 Nm Drive type Torque converter with powershift, 2 gears Maximum speed 20 km/h Fuel tank 53 l Hydraulic tank 95 l Max. hydraulic oil pressure 180 bar Max. hydraulic oil flow 60 l/min Operating weight 4,000 kg Tipping load (machine level) 2,900 kg Standard bucket 0.6 m³ Lifting height (bottom edge of bucket) 2,747 mm Turning radius inside/outside 2,156 mm / 4,061 mm Wheelbase 2,273 mm Overall length/width/height 4,936 mm / 1,770 mm / 2,570 mm Track width 1,500 mm Dedpfx Anjzqam Nezowa Highlights: Full cab with heating, ventilation, rear-view camera; sprung comfort seat; adjustable steering wheel; LED main headlights, LED work lights, rotating beacon; windshield wiper/washer system; electronic joystick for drive and hydraulic circuits; Euro quick coupler with pressure relief; flat-sealing oil couplings; 3rd/4th hydraulic circuit; rear hydraulics with 13-pin socket; floating position; powershift function; reversing gear on the joystick; oil cooler; lockable doors. Scope of delivery: HZM 816 Profi incl. Euro attachment & 0.6 m³ standard bucket, German operating manual, COC documentation, 2-year mobile warranty with free choice of workshop, invoice with VAT shown. Options: Individual configuration (tires, attachments) available upon request. Financing/Leasing: Available upon request, also for self-employed individuals and construction companies.

Condition: like new (used), Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) Dedpjx E Dncofx Anzowa 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 992 kg Functional Generator capacity: 65 kVA Dimensions of cargo space: 230 x 96 x 140 cm CE mark: yes Dwsdpfx Aezhzyxenzea Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 1997, machine/vehicle number: 79, Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Book block thickness: up to 90 mm Air supply: 10 bar Power supply: 400 V / 50 Hz / 1,6 kW (three-phase) Output: approx. 250 - 350 pcs / hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dwodslg Aahepfx Anzja On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm Djdpfx Anox D E Hbozewa • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Dwsdpfezfkbaex Anzoa Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: used, mileage: 159,800 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2018, emission class: euro6, color: white, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, parking heater, * Our internal ref.: 1093 * Well-maintained vehicle * (Two identical vehicles available) * Sprinter 516 * Original EVOBUS bodywork * City 65 * RETARDER. TELMA * LOW GENUINE MILEAGE – VEHICLE ONE OWNER * LED matrix display: front / side / side / rear with control unit * Bus lifting system Djdpfx Aneyxi Riozewa * Auxiliary heater * Stationary heating * Driver's cab air conditioning * Passenger compartment air conditioning * 2 fold-down seats * Double glazing * Convector heater * Manual folding ramp * Pre-installation for interior monitor (the monitor and cash register/printer shown will be removed prior to sale) * Clean vehicle * Vehicle in operation – mileage and condition may vary. * ALL INFORMATION WITHOUT GUARANTEE * INTERIM SALE RESERVED * PLEASE REFER TO OUR TERMS AND CONDITIONS. These are part of the sale!

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. Main spindle: • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Tailstock: • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector Dsdpfx Anjzi Rr Tezowa • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: used, Year of construction: 2023, ---- 2 units available Elcos generator set 065 Y DT AE 400V EQ: 100565452 Year of manufacture: 2023 Data: 3000 rpm, 50 Hz, 400 Vac, 6.5 kVA at 400 Vac, 2.4 kVA at 230 V Engine: YANMAR, type L100, diesel Dedpfjzkz A Sex Anzowa Mechanical speed governor and electric start Generator from a leading manufacturer with AVR Manual control panel with sockets Dimensions (cm): 103 x 62 x 80 (H), 224 kg

Condition: excellent (used), 113 sets, pallet collars type 65, Cordes, ideal for stacking goods on Euro pallets - second-hand : Price per piece blue pallet collars (net): only 45.-€ Price per piece in galvanized quality (net): only 55.-€ Manufacturer: Cordes Type: Pallet extension type 65 Year of manufacture: unknown With hook connection for pallet dimensions 1200 x 800mm Usable height; 800mm 800mm high 800mm wide Load capacity: 1.500kg Dead weight per set approx. 22kg 4 stacking plates for safe stacking collapsible New price: approx. 150.-€ Quantities available: 29 sets in galvanized and 84 sets in blue Dedpfxer Imatj Anzewa Condition: very good Available: immediately Location: 74080 Heilbronn

Condition: excellent (used), Year of construction: 2013, HT 665 MC plus TCMY - FANUC Multi-axis CNC turning machine for complete machining of turning/milling parts; Integrated spindle motors (ISM) on the main and counter spindle with thermocompensation system (liquid-cooled) Drive power: Main spindle - 29 kW Counter spindle - 22 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 7000 rpm Spindle connection (DIN 55026): Dwsdozczgvjpfx Anzsa Main spindle: KK 6 (max. bar diameter ø 65mm) Counter spindle: KK6 Y-axis: Travel range +/- 50mm The Y-axis is designed so that the resulting cutting forces are distributed across two axes. This results in extremely high rigidity for all machining operations. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology FANUC 18i TB with Manual Guide i dialog programming. Includes: ·Draw tube cylinder including draw rod ·Part ejector and flushing through the counter spindle ·2x 12-position tool turret VDI 30 radial with direction logic for up to 2x 12 driven tool stations! Swivel speed adjustable with feed switch. o Performance data: o Max. 6.7 kW at 2650 rpm o Torque constant 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle ·Part removal device for the finished parts ·Chip conveyor with a discharge height of 1200mm programmable (Type "hinged belt") ·Coolant system integrated into the chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar ·Electrostatic oil mist separator ·Hydraulic unit ·Machine light ·Documentation Year of manufacture: 2013 Includes: two Hainbuch chucks, collet chuck for collets 185E plus reduction is also included.

Condition: used, mileage: 433,626 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 02/2013, next inspection (TÜV): 12/2025, emission class: euro5, color: white, number of seats: 14, Equipment: ABS, air conditioning, parking heater, * Our internal no.: 1089 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration EURO 5 * New engine in 06/2021 at 341,638 km (current engine: 91,988 km), repair invoice amounting to 12,457.63 € is available * Auxiliary heater / stationary heating * Driver's seat heating * Gorba destination display with control unit CU5 Dedpjwnlhpsfx Anzewa * TFT monitor preparation * Convector heating * Seats with 3-point seat belts * 13 seats + 1 wheelchair space * 9 standing places * Mechanical fold-out ramp, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * The vehicle may be in use / mileage and condition may vary * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: used, mileage: 579,278 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2017, emission class: euro6, color: white, number of seats: 15, Equipment: ABS, air conditioning, * Our internal no.: 1090 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration 11/2017 - EURO 6 * New engine in 05/2024 at 534,162 km (current engine: 45,116 km), repair invoice amounting to approx. 15,000.00 € is available * Complete overhaul of automatic transmission including new torque converter in 07/2024 * Vehicle has dent/damage Dwjdpfxjwnlhve Anzja * Auxiliary heater / stationary heating * Driver's seat heating * LAWO destination display with SicmaControl unit * TFT monitor preparation * Convector heating * Seats with 3-point seat belts * 11 seats * 12 standing places including 4 emergency folding seats or 1 wheelchair space & 2 emergency folding seats * Mechanical fold-out ramp, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: used, mileage: 323,500 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2014, emission class: euro5, color: red, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal no.: 1106 * MB 516 Sprinter * VDL body * Mid-City * Lettering - V I N Y L - the vehicle is fully wrapped * Class M3 * Water pump and V-belt / idler pulley replaced new in 02/2024 * Automatic transmission * TELMA RETARDER * Driver's air conditioning * Passenger compartment – A/C * Auxiliary heater / stationary heating * Convector heating * Seats: 15 * Standing places: 12 * Vehicle speed approx. 99 km/h * Standing places * Manual folding ramp * Inspection book available * Length: 7.361 m * The vehicle has minor body damages – see pictures * More photos available on request * Front axle tires in good condition. Dsdjnp Dhuspfx Anzjwa * etc. * All information without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: used, mileage: 634,200 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2013, emission class: euro5, brakes: retarder, number of seats: 11, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1042 * Sprinter 516 * Original EVOBUS City 65 * Automatic transmission * Large passenger compartment - air conditioning * Driver's seat - air conditioning * Auxiliary heater / parking heater * Technical repair history includes: * Torque converter €1,114.78 * Reversing gear €3,900 * Automatic transmission €4,796.33 * Door drive with motor €2,025 * New rear axle air bellows 11/2022 * Headlights * TELMA €5,933.40 * Differential 1,159.52 * DIESEL ENGINE - Exchange €9,114.33 / February 10, 2022 * New front brakes 03/2023 * New front brake discs 05/2022 * New starter 02/2022 * Diesel particulate filter exhaust system 02/2022 * New front and rear engine mounts 02/2022 * New intercooler 02/2022 * New viscous fan 02/2022 * New air conditioning compressor 06/2022 * Intercooler / charge air hose / 10/2022 * etc., ... List of €41,355.17 is available! - * Matrix * Cruise control * Convector heater * Mechanical folding ramp Dsdjtqk Hfopfx Anzswa * Driver's compartment protective screen * etc. * All information without guarantee * We reserve the right to sell prior to sale * Please refer to our terms and conditions

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Sauter 12-position BMT Sub-spindle Full specification available as PDF file Dwsdpfx Ajy Nzc Esnzja