Used Twin for sale (3,130)

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Ncsdpfx Abjym A S Ijvop Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, Ncedsvfxqyopfx Abvsp 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: used, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space length: 11,400 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, BENALU Optiliner 68 m³ Twin-Liner | Combination Rigid/Liquid | 3-Axle Tipper Semi-Trailer Description For sale is a BENALU Optiliner 68 m³ Twin-Liner in a special configuration. Ideal for operations looking to transport both free-flowing solids and liquids. Thanks to the removable stainless steel tank, the trailer can be flexibly used as a rigid/liquid combination vehicle. The vehicle comes from professional use, is in top technical condition, and features premium special equipment. Technical Data (Body) Volume: approx. 68 m³ * Internal length: 11,400 mm * Internal height: 2,400 mm * Internal width: 2,480 mm * Tare weight: approx. 9,500 kg * Smooth sidewalls * Floor thickness: 5 mm * Sidewall thickness: 2.2 mm * Double-wing doors * 2 grain chutes * Internal ladder rungs * 2 external shovel holders * Removable rear step ladder Chassis * Axles: Jost * Brakes: 430 mm disc brakes * EBS: Wabco ECAS incl. Optiturn * Lift axles: Axles A & C, automatic control + start-up assist * Coupling height when loaded: 1,170 mm * Kingpin: 2" * Steering: none * Smartboard & automatic raising/lowering * Automatic lowering when tipping Ncsdpoxzw Ixjfx Abvjp Equipment * Tipping cylinder: Hyva, stroke 8,200 mm * Tipping angle: 46° * Hydraulic connection: 1" coupling * ADR equipment available * 4 rear LED work lights * Toolbox + 50L water tank * PVC individual mudguards, anti-spray flaps * Steel underrun protection, foldable Tyre configuration * 6x tyres 385/65 R22.5 * Steel rims ET120 * Rolling noise: 69 dB * Fuel efficiency: B Tarpaulin system * EasyTarp – electrically operated, side opening * Electric control * Tarpaulin color: metallic gray (B1070) * Platform at front wall, left ascent * Front & rear tarpaulin caps Special Equipment Twin-Liner (Harmer Version) * Removable stainless steel liquid tank 26 m³ * Banana shape for complete emptying * Level indicator * Börger rotary lobe pump FL1036 (hydraulic) * Shutoff when full (electrohydraulic) * Lateral intake/filling units per side – swing-out * Internal rinse line (6-inch) * Pneumatic valves * Air connection for cleaning * 8-inch intake unit front right * Interior lighting & additional work lights * Platform on chassis with left ascent * Side marker lights with indicator function * Hose reel + lance at rear * Manual suction for emptying * COC documents & factory test run Paintwork * Complete 2-color paintwork * Chassis: RAL 9005 Black * Body: RAL 9006 Silver * Reflective strips: White / Red We are happy to provide you with further information upon request.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' Ncodpsxya Hzofx Abvsp LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: used, Year of construction: 2004, Machine Year of Manufacture Bar Loader Additional Information Hours Ncsdpfxsytnywe Abvjp Twin 42 2004 Irco Breuning SIMAG Hydraulic line defective at turret 1 or 2 79593 25020 Twin 42 2004 Irco Breuning SIMAG Dina module removed, pressure clamp (indicates collet is not closed) 69573 9625 Twin 42 2004 Irco Breuning SIMAG Machine operational and in production 72402 8375 Twin 42 2004 Irco Breuning SIMAG Main spindle defective with bearing damage, spindle clamp defective, LT module missing, Dina module missing Twin 42 2008 Irco Breuning SIMAG Machine operational and in production 5104 83790 Twin 42 2008 Irco Breuning ECO Profi multi-channel changer Machine operational and in production 99825 76595

Condition: new, Year of construction: 2026, max. cutting height 200 mm Ncodpfx Abeu I Duovep max. cutting width 400 mm max. passage width 490 mm feed rate 5-30 m/min. sawing motors 2x 37 kW ( also more KW possible ) feed motor 2,2 kW saw shaft diameter 70 mm saw blade diameter 325 mm weight 2.800 kg Basic equipment Electrical height adjustment of the upper rollers Special equipment Laser with adjustment device Driven roller gear Electronic braking device

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 100 mm Turning length : 580 mm In General: Year of manufacture:2007 Control system:Siemens 840 D Turning diameter:100 mm Turning length:approx. 580 mm Bar capacity:32 mm Main spindle: Technology:Motorised spindle Speed:8,000 rpm Torque max.:100 Nm Power max.:26 kW C-axis:0.001° Njdpjynda Asfx Abvjcp Bar capacity:32 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Motorised spindle Speed:8,000 rpm Max. torque:100 Nm. Max. power:26 kW C-axis:0.001° X-axis:145 mm Z-axis:380 mm Clamping cylinder:Partial hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:220 mm Y-axis:60 (+/- 30) mm Z-axis:320 mm Tool carrier II (X/Z): Technology:Tool turret :Number of stations. 12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:120 mm Z-axis:345 mm Equipment: Chip management:Chip conveyor Coolant supply:Internal coolant system Bar loader:Irco Breuning Parts removal:Parts gripper + indexing conveyor Tailstock:Stroke 250 mm, quill MK 3 Chuck:2x Hainbuch Spanntop Tool holder:Various driven and static holders

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Nodpfsyga U Hox Abvscp Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials. Ncodpfxoyfm Spj Abvop

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Nsdpjyfm Epefx Abvecp Ideal for powders, granulates, or difficult-to-flow bulk materials.

Year of construction: 2022, condition: new, 1 x Niro-Tech dual-system twin-shaft paddle mixer. Model - RX-400. Capacity - 400 litres. Max product input - 320kg. Installed power - 3kW. Electrics - 400v, 50hz, 3 phase. Manual loading valve with magnetic sensor. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12 month warranty. Nedpohq Rgpofx Abvjcp Please allow a lead time of up to 6 weeks for the manufacture of this machine.

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. Ncjdpfx Abox Sq I Njvjp For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2020, operating hours: 602 h, Arjes IMPAKTOR 250 - 2 sets of shafts - INCL. STAR SHAFTS Year of construction 2020 Hours 602 Original paddle shafts - Armored. Included and mounted, W-E-R-T original star shaft (only 15h - like new) Easy to repair in contrast to the original paddle shaft. Ideally suited for: Ncodpfx Abor Epxljvjp - Wood - old wood - Rootstocks - tires - Light building rubble Tracked undercarriage and hook lift version Length (mm) 7,700 / 7,300 (transport) Width (mm) 2,300 / 2,300 (transport) Height (mm) 3,500 / 2,800 (transport) Total weight (kg) 14,000 DRIVE EU US ROW* Engine type (Volvo Penta) Exhaust emission standard EU Stage V Bonfiglioli transmission OUTPUT BELT Discharge height (mm) 3,450 Width (mm) 800 Including overbelt magnet and water spraying system SHREDDING UNIT Hopper volume (m3) 2.25

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min Ncedpfxjx U E Sze Abvep SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; HIGH PRESSURE COOLANT PUMP ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: excellent (used), Safeline Twin head metal detector Serial: 115464 Stainless twin lane metal detector, ferrous in foil head, belt dimensions 2100mm x 100mm, aperture 150mm x 160mm, with pneumatic blow reject into reject bin, bin full sensors, 3Ph Nsdonbfhzopfx Abvocp

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Foldable discharge conveyor. Nodsu Di Azopfx Abvecp Radio remote control.

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Ncjdpfxexiu Dmo Abvep Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: excellent (used), Catalogue number 7865 TECHNICAL DATA - max blade diameter: 315mm - spindle diameter: 30mm - blade guard included - max cutting height: 40mm - min saw spacing: 180mm - max saw spacing (edge-to-edge): 2400mm - manual saw spacing adjustment - main motor power: 2x3kW Ncjdpfx Abex U Tvhovjp - feed motor power: 0.74kW - feed with inverter + forward/backward - overall dimensions (LxWxH): 3300x1000x1600mm - weight: 250kg ADVANTAGES – Made in Poland – Manual saw spacing adjustment – Very good condition – Unpainted – Double-saw, used Net price: 7,900 PLN Net price: 1,880 EUR based on exchange rate 4.2 EUR (Prices may change with major rate fluctuations)

Year of construction: 1993, condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel Ncodpfoycuuyox Abvep General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Ncsdjwuz Dyspfx Abvop Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model M70 Main Drive Number of axis 6 Spindle Speed 4000 RPM Technical Specification Counter Spindle yes Ncedpfjx D Iftsx Abvsp Driven Tools yes This 6-axis Quick-Tech i60 twin was manufactured in 2016, featuring a CNC turning center with B-axis and driven tools. It includes a main spindle bore of 60 mm, sub spindle bore of 42 mm, and a maximum turning length of 300 mm. The machine offers 4-axis simultaneous machining, full axis programming, and a Mitsubishi M70 control system. Consider the opportunity to buy this Quick-Tech i60 twin horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Nedpfx Abjyhcghevocp Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 Nsdpeqn A Rgofx Abvocp frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Nodpfjyhcc Ajx Abvscp Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: excellent (used), Twin depositor, two separate depositors fed by large shared hopper. Each depositor can deposit shots from 125ml to 1200ml. Nsdpfxox Hbf Ie Abvocp