Used Uks Smoke 100 for sale (25,318)

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Condition: New machine Technical condition: New Front tyres type: Solid rubber (bandage tyres) Front tyres size: 16-5-11 1/4 Front tyres condition: 80 - 100% Rear tyres type: Solid rubber (bandage tyres) Rear tyres size: 16-5-11 1/4 Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Nwjdpoyhr D Aefx Aazjl Integrated charger

Condition: used, Year of construction: 1994, Used premix BC – 10000 Lh Technical Overview: The used premix BC – 10000 Lh is configured as an industrial bottling unit created by BC in 1994, specifically the 10o model. This system is admirable given its production capacity of 10,000 L/h. It is underlined that the machine has been stored in conditions that allow its immediate operation. It can take place immediately following installation and proper assembly.  This used premix is actually located in the north of Italy. Njdpjvgubdjfx Aazjwl Operational and Maintenance Details of the Used premix BC – 10000 Lh: From an operational point of view, this used premix is presented disassembled. This indicates that the shipment of this machine will be fast. It is essential to note that technical manuals are available, an element that will significantly contribute to ordinary and extraordinary management and maintenance. These documents are indispensable resources to ensure the long-term operational efficiency of the system. Features of the CIP System: In terms of sanitization, the integrated CIP system is a crucial component of this used premix BC – 10000 Lh. This functionality is not an option but a necessity, given the importance of in-place cleaning in the bottling process to ensure compliance with sanitation standards. The effectiveness of this system directly influences the quality of the final product and the general efficiency of the production plant. Overall rating of the Used premix BC – 10000 Lh: In conclusion, the premix model 100 presents itself as a machine with robust specifications and a history of reliability. However, interested operators and organizations should proceed with a thorough assessment of their operational needs and compatibility with this specific bottling machine model. Considering its capabilities, the availability of manuals, and the CIP system, it is a unit that, despite its age, retains some value in the appropriate manufacturing context.

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Nwedpfx Aoy Ua Rxeazjl Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, mileage: 1 km, power: 75 kW (101.97 HP), first registration: 06/2025, fuel type: diesel, empty load weight: 1,471 kg, next inspection (TÜV): 09/2028, fuel: diesel, energy efficiency: A, color: white, gearing type: mechanical, number of seats: 2, Equipment: air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, Passenger airbag, side airbags, heated exterior mirrors, electric windows, adjustable steering column, multifunction steering wheel, rear parking sensors (PDC), partition wall without window, cargo area with wooden floor lining, electrically adjustable exterior mirrors, Bluetooth hands-free system, height-adjustable driver's seat, USB port, hill start assist, start-stop automatic system, traction control (ASR), outside temperature display, rear view camera, daytime running lights, front head airbags, central locking with remote control, DAB+ digital radio, emergency braking assistant, driver fatigue warning system, voice control, traffic sign recognition, steel wheels, high beam assistant, summer tires, sliding door on the right, speed limiter, Android Auto, Apple CarPlay, spare wheel, errors and prior sale reserved. Stock number 351. Nwedpfx Aaowr Em Hezol

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Nwedey S A Rijpfx Aazsl Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 units of fixed tool holders - 2 units of powered tool holders

Condition: like new (used), functionality: fully functional, Dürkopp adler 867-290342-100 Longarm Nodpfxovz Tk Hj Aazewl Dürkopp adler 467-65-Fa 273 Longarm bed zipper machine

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL DATA - track width 250mm - working width of the roller 250mm - max. disc diameter 300mm - disc bore diameter 60mm - max. cutting height 100mm - table width with extension 520mm - table length 1580mm *from above: - pawls, 2 rows - sliding roller, metal, pressure roller - roller with saw blades - smooth sliding roller, metal, sliding roller *from below: - sliding roller - guide strip - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 0.75kW - main motor 15kW - diameter of dust extraction nozzle 200mm Nwedozr Izkspfx Aazol - overall dimensions L/W/H 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian made – very good condition – used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination Nsdpfx Ajwiqq Soazjwl PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: good (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 11140003483, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,500 mm, total length: 4,000 mm, total width: 4,000 mm, table width: 795 mm, table length: 1,500 mm, rotary table diameter: 800 mm, overall weight: 8,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,103 h, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 50 A, DECKEL MAHO DMU 100 T Universal Machining Center - Positioning speed X/Y/Z: 20 - 2000 mm/min - Measuring system resolution X/Y/Z: 0.001 mm - Positioning accuracy X/Y/Z: 0.010 mm - Tool holder: SK 40 - Max. tool diameter when all positions in magazine 1 are occupied: 130 mm / magazine 2: 80 mm - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 8 kg - Max. total tool weight in magazine: 160 kg - NC rotary table integrated into the fixed table - Number of T-slots: 14 / H 12 mm Nwedpozxzk Eefx Aazjl - Dovetail guide / one: 14 / H 7 mm - Distance between T-slots: 63 mm - Permissible load on the worktables: fixed table: 800 kg, rotary table: 500 kg - Includes the tool holders located in the tool changer Note: The machine can be transported on a truck up to 3000 mm wide! FCA D-72589 Westerheim - loaded onto a truck.

Condition: used, Year of construction: 2015, fuel type: electric, Please contact Gebrauchtgeräte Center for more information Nodpfx Aozzlxljazjwl

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). Nwjdpfsz E R Dxjx Aazel - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: refurbished (used), Year of construction: 2002, Horizon VAC 100 A+C brochure line Staple-fold station SPF 20A, trimmer FC 20A Jogger PJ 77R Nodpfeyl Aiwox Aazjwl

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Nsdpfx Aaoy Ey E Rozowl Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: used, thickness of jaw / mm max. clamping width / mm weight / kg Nedpfx Aeyr Sl Ijazowl length in total / mm Roemheld Hilma NC 100 CNC machine vice

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2028, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle number: G300103 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) VIDEO: Sewer cleaning vehicle with 2,875 operating hours Rockstroh Dran Jet 100 Year of construction: 2010 Pump performance 91 l/min - 150 bar 115 l/min - 120 bar 128 l/min - 160 bar* 120 l/min - 180 bar* 106 l/min - bar* 92 l/min - 210 bar* *only for van body High-pressure system Half-side positioned high-pressure unit Safety, overflow, and pressure relief valve 1.5" water filter Pump drive Auxiliary drive vehicle (van) Hydraulic (van or box body) Hose reels 1 x 80/100/120m DN10/13 1 x 80m DN16/19 1 x 40m water filling reel 3/4" Financing example: * Internal number: G300103 Nwsdszpcwzjpfx Aazel * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, weight 240 kg diameter 800 mm height 930 mm 0 122 l engine output 0,64 kW voltage 380 V work speed 1500 rpm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. Nodpfx Aajy S D U Njzswl These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Model: Granulator - 1000 R.A. Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Nodpfx Aaszmyufezewl Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, This listing is for a Agilent Cary 100 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labelling, and enhanced reporting and file transfer options. Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Precision Temperature Control: Offers a temperature control pr... Nwsdpexxz Scjfx Aazol

Year of construction: 2025, condition: as good as new (ex-display), Max. Test force 100 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: Nodjcxwq Rjpfx Aazowl - machine in working order - incl. load cell 100 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - mechanical clamping device - hydraulic clamping tool - bending tools - compression plates - clip-on extensometer - probe arm extensometer - video extensometer - laser speckle extensometer - climate chambers - high temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2004, condition: excellent (used), REEPACK REEFAST 100 Nwodof Ddbnjpfx Aazol ID.NO. 1866 Trough sealer Reepack mod Reefast 100 years mod 2004 associated gas mixer. Closes 3x troughs at the same time automatically. Dimensions trough 190 x 140 mm

Condition: used, volume capacity / length / mm height / mm total power requirement / kW Nedowgi S Aopfx Aazjwl weight of the machine ca. / t required space / m

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 300 mm, – Capacity 100 tons – Cylinder stroke 300 mm Nsdpfxjwg Smis Aazswl – Working width 1070 mm – 2 speeds – With V-blocks/pressure plates – Pressure gauge – Emergency stop – Documentation – 400 V

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Nwodpjwnprxsfx Aazsl Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: used, Year of construction: 1992, Unloading system Polar TR ER 100-3 (1992) Year: 1992 Nwsdpouliw Tsfx Aazjl Description - On the right side of the guillotine

Condition: used, Year of construction: 2014, turning diameter 160 mm swing diameter 210 mm turning length 210 mm Control Siemens Sinumeric 840 D total power requirement 34/26,5 kW weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: Nodpfjyan Riox Aazjwl X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113