Used Ultrasonic for sale (265)

Condition: good (used), functionality: unexamined, machine/vehicle number: WB0C22AA400210418, empty load weight: 1,238 kg, maximum load weight: 1,462 kg, overall weight: 2,700 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, first registration: 02/2023, next inspection (TÜV): 05/2027, loading space length: 3,560 mm, suspension: steel, tire size: 195/70 R 14, tire condition: 50 %, maximum speed: 100 km/h, color: black, trailer brake: trailer braked, our vehicle number: # 30658 Böckmann Grand Master SR C22 Itodex E Rwwjpfx Acpjn Horse inhalation trailer conversion Platinum Animal with ionization unit Type I (stationary concentrator) Ultrasonic nebulizer micro 801 Animal JSR Fogger cold fogger 2x infrared heating panels lowered WCF chassis aluminum floor poly body with poly hood walk-in tack room shock absorbers for 100 km/h approval 14" aluminum rims 195/70 R 14 tires automatic jockey wheel lockable ball coupling rear ramp with gas pressure struts as lifting aid manual tarp lift shunting handle roof ventilator 2 sliding windows left/right (each) 2 feed troughs 2 saddle racks LED interior lighting Multi-Safe system, padded sides + side wall padding central post partition with padding external power socket

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight Itedpfx Aez Enbbjcpjn system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Iodpofz I N Tefx Acpstn materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, controller manufacturer: Mitsubishi, Equipment: documentation/manual, - 4 ultrasonic tanks with floor sound and heating - 2 rinsing tanks with heating - Surface separator - Tank/circulation filtration per tank - Additional tank with external heating - DI water connection with carbon cartridge - 1 vacuum dryer (with reserve pump) - Transport system for automatic transfer of the product carriers Itodpfovu Acfjx Acpjn - 12 product carriers for holding individual transport baskets - Mitsubishi PLC control

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L # Ultrasonic equipment: 4000W, 25kHz Itodpfx Aexwm Dbjcpjn # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Electrical Equipment # Operating voltage: 400Vx3 # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Isdpfxofz Aw Hj Acpjtn Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2023, condition: new, INTERSONIK ROBOWASH provides effective washing solution for mass production of metal industry! Perfect parts washing systems for degreasing and precise cleaning. With the Automatic Cartesian Conveying Systems, full automation is provided in Industrial Washing and the process is carried out very fast with no need of an operator. Application Areas: ► Surface cleaning prior to the coating and painting process ► In the automotive industry, pistons, valves, engine blocks, shock absorbers and all other spare parts' sensitive cleaning. ► Machined parts, fittings, installation parts cleaning ► Fork, spoon, knife, door handle and base and all metal goods and accessories cleaning ► Refrigerator, dishwashers, oven, etc, spare parts cleaning ► Medical and surgical instruments cleaning ► Electronic industry and PCB cleaning Advantages ► Oil, chip, polishing residue, and industrial contaminations are cleaned precisely ► Leaves durable and clean surface against corrosion ► Works very fast and safe does not need an operator. Operation Processes ► Pre wash ► Ultrasonic wash ► Rinsing ► Pasivation ► Drying Ideal for automative and metal machining industries Itsdpfx Aed I A A Sscpon ultrasonic washing plant, robot transfer ultrasonic washer, coating plant, robot ultrasonic washing, parts washing Please feel free to contact with us for other details and reference list.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Immediately available! Demonstration unit. 24-month warranty. Useful volume: Cleaning area D = 800 mm Internal height 530 mm Load weight 150 kg Machine body, internal piping system, Itsdpfor Hm R Tsx Acpjn control cabinet, and wash basket made of stainless steel - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking mechanism - Removable filter screen Accessories: Swirl extraction Automatic level compensation Oil skimmer, WE version Pumping device / bottom flushing with hose and manual ball valve.

Year of construction: 2024, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 4729, Condition: like new, only approximately 20 operating hours Delivery: June 2024 Original purchase price: €98,000 Includes ultrasonic screen cleaning system for a mesh size of 0.090 mm Screen area: 5.3 m² Screen diameter: approx. 2,600 mm Overall height: approx. 1,964 mm Installation dimensions according to drawing: approx. 1,950 × 1,950 mm Itodpfx Acsz Etwnspjn Nominal speed of the screen body: 225 rpm Motor power: 5.5 kW Power supply: 400 V, 50 Hz Maximum product temperature: 80 °C Maximum permissible negative pressure: -5 mbar Static empty weight: approx. 2.77 t

Condition: excellent (used), Year of construction: 2008, operating hours: 64 h, functionality: fully functional, color channels: 5, paper width (min.): 375 mm, paper width (max.): 520 mm, - Ryobi PCS-H - Turning ratio: 2:3 / 5:0 - RYOBI semi-automatic plate changer - IR dryer - Grafix Digital 3000 powdering machine - Electronic side guide control - Electronic double sheet detection - Ultrasonic double sheet detection - High-stack delivery - Sheet jogger Ijdpfxjzduu Uj Acpotn - Automatic blanket washing system

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,143 h, travel distance X-axis: 406 mm, number of axes: 3, This 3-axis Stratasys FDM TitanTI T0031 was manufactured in 2004. It features a build envelope of 406 x 355 x 406 mm and is compatible with various model materials including ABS and PC-ABS. The machine includes additional accessories such as an ultrasonic cleaning tank and replacement print tips. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI T0031 machine we have for sale. Contact us for further details. Itedpfxsz Nlw Ne Acpen - System Software: v2.4.0- Model Material Compatibility: ABS, ABSi, PC, PC-ISO, PC-ABS, PPSF- Installed Model Tip / Size: T12- Installed Support Tip / Size: T12- Envelope Temperature (Current / Set Point): 109 °C / 110 °C- Model Head Temperature (Current / Set Point): 110 °C / 110 °C- Support Head Temperature (Current / Set Point): 110 °C / 110 °C- Loaded Material Canister 1 (Model 1): PC-ABS (1245.55 cm³)- Loaded Material Canister 2 (Model 2): PC-ABS (1334.41 cm³)- Loaded Material Canister 3 (Support 1): Not Loaded (0.00 cm³)- Loaded Material Canister 4 (Support 2): PC-ABS_S (1480.18 cm³)- Optional Accessories: Ultrasonic cleaning tank unit (Evolution WP / Genosonic), replacement print tips (T12, T16, T-class headworks), cleaning brushes, maintenance tools, heat-resistant safety gloves, Superlube synthetic lubricant, CGS Stage grease, build sheets/pallets (including stacked build trays and fixing accessories in box labeled), additional material canisters (SR-20 Soluble Support, PC-ABS Model BLK, PC_S Support)

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 719131, Heidelberg – GTO 52-1 Number of copies produced 8.350.000 Max-Sheet Size 360 x 520 mm (14.17 x 20.47 in) Max.printing Speed 8000 /h Ijdpfx Acez Ny Dwspotn Dampening rollers –Direct Dampening Continuous-1 Ink Fountain-Laser slit blade Electric equipment- 50Hz 380 V Electromechanical and ultrasonic double-sheet detectors Powder spray-WEKO T6 Circulation and cooling -Technotrans Alfa DS Availability immediately

Condition: ready for operation (used), Year of construction: 2002, operating hours: 852 h, travel distance X-axis: 406 mm, number of axes: 3, Plastic 3D printer manufactured in 2002. This Stratasys FDM TitanTI supports various model materials including ABS and PC, with a tip size of T16. It features an envelope temperature set point of 145 °C and comes with optional accessories such as software, maintenance tools, and a large ultrasonic wash bath. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI machine we have for sale. Contact us for further details. - System Software: v2.4.0p1- Model Materials Supported: ABS, ABSi, PC, PC-ISO, PC-ABS, PPSF- Tip Size Model: T16- Tip Size Support: T16- Envelope Temperature Set Point: 145 °C- Model Head Temperature Set Point: 145 °C- Support Head Temperature Set Point: 145 °C- Envelope Temperature Current: 143 °C- Model Head Temperature Current: 145 °C- Support Head Temperature Current: 144 °C- PC Material Volume: 1512.53 cm³, 26.76 cm³- PC_S Material Volume: 1512.53 cm³, 857.12 cm³ Isdpfxjz Nlq No Acpstn

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: Iodpfx Aey Rmdwecpotn - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: excellent (used), Ultrasonic sensor, sensor, sonar bero -Manufacturer: Siemens, ultrasonic sensor Sonar-Bero Ovp -Type: 3RG6015-3AEOO -Number: 2x sensor available -Price: per piece Itsdolfihkspfx Acpjn -Dimensions box: 165/70/H70 mm -Weight: 0.3 kg/piece

Year of construction: 2017, condition: used, Manufacturer : Chauvin Model : RSMB 60/1 Year: 2017 Type: Vibrating sieve with ultrasonic option ATEX classification: ExII2 GD Exe IIC Grid diameter: 600 mm (=0.31 m²) Separation level: 1 Number of sieves available: 3 Sieve sizes: 1000, 250 microns (with ultrasonic cleaning system) + 141 microns Change in vibration level: mechanical (rotor adjustment) Ultrasonic de-clogging head available but incomplete: Itjdsziqf Hspfx Acpjn Plan an ultrasonic generator (specified equipment reference) This request may be subject to a further quotation Material : stainless steel Motor power : 1,10 kW Dimensions: 100 x 120 x 120 cm Weight : 200 kg

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented Ijdpfx Aezu Tu Iocpetn CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Year of construction: 2016, condition: used, Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and Air Gap System (AGS): die-cutting system, magnetic cylinder, air-gap adjustment system, semi-rotary and fully rotary gearless die-cutting system, printing plate/die plate thickness range: 0.2-2mm, Image Distortion System (IDS), 3) Air Gap System (AGS), 4) outfeed unit, web control, complete servo motor control of the material web, slitting unit, 10 pivoting razor blades with lateral adjustment, additionally 8 knife/counter-knife cutting groups for longitudinal slitting, rewinding shafts, first rewinding shaft, independent servo-driven pneumatic 76mm expansion shaft, for rolls up to 800mm or 150kg, automatic web tension control, direction of rotation: clockwise/counterclockwise, with documentation. An on-site inspection is possible. Itedpfozy Rv Tox Acpjn

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette Ijdpsz Ea Itsfx Acpstn • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, overall weight: 465 kg, input voltage: 240 V, total width: 600 mm, total length: 3,800 mm, total height: 1,300 mm, Multifinisher Multigraf Touchline CPC375 XPro & Folding Unit TF375 XPro Counter reading: approx. 395,000 sheets Specifications: Paper size: 105 x 148 mm - 375 x 1,050 mm Finished size: 50 x 48 mm - 375 x 1,050 mm Paper weight: 100 - 400 gsm (creasing), 80 - 300 gsm (perforating), 80 - 400 gsm (cutting) Feeder: Stack feeder (suction belt) Max. speed: 2,100 sheets/hour (SRA3 to A4, 2-up) Feeder capacity: 180 mm Double sheet detection: Ultrasonic Itodjxvx Atjpfx Acpon Tool recognition: Fully automatic Operation: Touchscreen Power supply: 240 V, 50 Hz Dimensions (L x W x H) with folding unit: 3,800 x 600 x 1,300 mm Weight with folding unit: 465 kg The machine has been workshop overhauled and maintained according to the manufacturer’s specifications. Warranty period: 6 months. The machine is available ex stock in Renningen near Stuttgart. Optional shipping within Germany negotiable. Installation and operator training on site (within Germany) negotiable. Optional maintenance contract available.

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. Itedpfoyx Uy Aox Acpjn • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. 20 x LTA AC3001 R, production years 2004-2011. Iedpfx Acozv Ttaepjtn

Condition: excellent (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 863/2020, total height: 2,100 mm, inner dimension length: 530 mm, inner dimension width: 320 mm, inner dimension height: 200 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, electrical fuse: 50 A, input current: 40 A, temperature: 70 °C, heating capacity: 6 kW (8.16 HP), load capacity: 40 kg, Equipment: documentation/manual, Höckh Multiclean Lean Concept III, including filling with new Safechem Dualene 1601 solvent. Everything is complete and ready for use and is sold as a complete package. The system offers options for immersion spraying, steam degreasing, and ultrasonic cleaning. Remote maintenance is prepared and only requires an internet connection. In addition to the system, the scope of delivery includes: - automatic basket feed - 3 cleaning baskets - chiller for system cooling - complete documentation Itjdsy Sxn Dspfx Acpsn The system can be inspected and tested before purchase. After the purchase, we will gladly assist with dismantling and loading, and can also provide a brief training session on machine operation and maintenance. The system is fully functional and in very good condition. We are selling this system because we now have a larger system in operation.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment Itodjxw Tg Nepfx Acpjn # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. Ijdpfx Aezv S Tlocpotn The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.