Used Universal Lathe for sale (8,510)

Condition: used, turning diameter 350 mm turning length 200 till 1040 mm control OSP-P200L Nledpfx Aj Aa A Nvjbush weight of the machine ca. 11000 kg

Condition: used, Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 150 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 170, tool weight: 6,000 g, Universal Machining Center Manufacturer: MIKRON Type: HPM 450U Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical details: X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm B-axis: ° C-axis: 360° Nsdjz Ic Afjpfx Abuslh Spindle speed: 20,000 rpm Drive power at S1/S6 (40% duty cycle): 23/36 kW Torque at S1/S6 (40% duty cycle): 77/120 Nm Tool holder: HSK-A63 Number of tool positions: 170 Tool change time:

Condition: ready for operation (used), Year of construction: 1985, Immediately available, free of encumbrances: L & Z lathe, Elliott Type Concord 460 Year of manufacture 1985 Swing over bed 550 mm Swing over cross slide 310 mm Turning length 1000 mm Spindle bore 71 mm Drive power 7.5 kW Spindle speeds 10 – 1000 rpm Coolant system Chuck Tool holder with inserts Weight 2.5 tons Nljdpfxe Aa Ih Ro Abush Price: EUR 1,750.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1990, L & Z Lathe AFM TUG 40 Type TUG 40 Year of manufacture 1990 Center height 200 mm Diameter over slide 280 mm Turning length 1500 mm Drive power 5.5 kW Nsdpe Aa Im Hefx Abujlh Spindle speeds 18 - 1600 rpm Spindle bore 52 mm Chuck, Lynette, steel tool holder Multifix with inserts Price: Euro 2,250.00 plus VAT, ex works.

Condition: used, Year of construction: 2007, functionality: fully functional, • WEMAS TURN 400-52 • Year of manufacture: 2007 • Control system: FANUC 0i-TC • Programming system: Manual Guide • Max. turning diameter: Ø 484 mm • Max. turning length: 750 mm • Spindle bore: Ø 70 mm Nsdpfx Aboz Ip Nfeuelh • Rapid traverse: 24 m/min • Tool turret: VDI 30 • Hydraulic chuck • Hydraulic quick-change turret Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, spindle bore: 140 mm, overall weight: 10,000 kg, CNC Fagor control system 4-jaw chuck, 1200 mm 40 kW motor Nledpo Aa Nc Ajfx Abujh 2000 x 1300 mm capacity 550 mm steady rest Weight: 10,000 kg

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Njdpfx Ae Aa Azlsbuslh Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: used, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and the generous working area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Working area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Clamping table (rotary table): Clamping surface: 600 x 1,200 mm Njdszcqcgepfx Abuslh T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150-liter capacity Machine weight: approx. 4,300 kg (including safety enclosure) Product video "Everything from a single source: We would be happy to offer you a suitable bank financing solution for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, Two machines with extensive equipment and an attractive accessory package! Both machines share a common chip conveyor, which ensures efficient chip removal. In addition, a coolant tank has been retrofitted, which provides a valuable extension to the equipment. Nljdpfoz Tc Iyjx Abuoh A particular advantage is the comprehensive accessory package: the scope of delivery includes various tool holders, clamping jaws, and a new driven tool (AGW).

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling Nedpe Adq Uuefx Abujlh • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: used, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Cnc : SIEMENS Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Node Adr Rqjpfx Abuolh Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Bed width : 550 mm Machine equipped with: A 4-jaw chuck, 800 mm diameter

Condition: used, Year of construction: 2002, x-travel 1200 mm y-travel 600 mm z-travel 600 mm control Sinumerik 840D SIEMENS table-size 1.420 x 600 mm table load 2,0 t spindle taper ISO 50 spindle turning speed range 4.000 U/min feed 2.000 mm/min rapid traverse 10,0 m/min voltage 400 V total power requirement 42 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,60 x 2,45 x 2,15 m Nledpfs Adbzlox Abush coolant tank 1,25 x 1,25 x 0,50 m - Serial-No.: 076 - Control system: SIEMENS Sinumerik 840D - Electric handwheel - Hydraulic tool clamping with foot switch - SEMPUCO universal milling head - Coolant system

Condition: used, Year of construction: 2005, operating hours: 4,088 h, turning length: 1,021 mm, turning diameter: 380 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 1,085 mm, overall weight: 5,200 kg, bar passage: 74 mm, CNC Lathe Manufacturer: MAZAK Model: QTN 250M 1000L Year of manufacture: 2005 Control system: MAZATROL 640T NEXUS Technical details: Turning diameter: 380 mm Max. swing diameter: 675 mm Nljdpfx Abez S N Iwjueh Turning length: 1,021 mm Bar capacity (spindle bore): 74 mm X-axis: 230 mm Z-axis: 1,085 mm Spindle speed: 4,000 rpm Number of tool stations: 12 positions Approx. weight: 5,200 kg Operating hours: approx. 4,088 h Condition: Used The machine does not include a chip conveyor! Accessories, tools, and work-holding devices shown are only included in the scope of delivery if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: NA, turning diameter over cross slide: 630 mm, spindle bore: 140 mm, turning diameter: 900 mm, center height: 450 mm, center width: 6,000 mm, total length: 9,800 mm, total width: 1,500 mm, total height: 1,100 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 11 rpm, type of input current: three-phase, overall weight: 11,500 kg, workpiece weight (max.): 4,000 kg, spindle mount: MK 5, The potentiometer is still in use and is fully functional. Njdj Aduipspfx Abuslh

Condition: good (used), Internal article number: 26031 Universal milling machine Deckel FP1 Continuously variable feed + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The tool holders shown in the pictures are not included in the offer. The servo motor has been overhauled! Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Power consumption: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Nedoyqx S Espfx Abuolh Tool holder: SK40 Feed: Continuously variable, 5-500 mm/min The machine is fully functional and can be inspected, by prior arrangement, in our heated warehouse with an area of over 500 m².

Condition: used, Year of construction: 1999, turning diameter 800 mm Nljdpfe Adu S Dox Abueh turning length 2000 mm control MONFORTS control Control System MTC-K centre height 400 mm centre distance 1970 mm swing over bed 830 mm swing diameter over slide rest 540 mm spindle bore 135 mm face slide travel 450 mm spindle turning speed range 2 - 1600 U/min transmission ratio 4 feed power X/Z axis 11,3 / 23,9 kN rapid traverse X-axis 4 m/min rapid traverse Z-axis 6,8 m/min tailstock quill diameter 125 mm tailstock quill stroke 200 mm tailstock taper MT 6 total power requirement 53 kVA weight of the machine ca. 6 t dimensions of machine L x W x H 4,35 x 2,17 x 2,10 m Accessories: 3-jaw chuck 630 mmø, MULTIFIX head "D", various tool holders, chip conveyor, coolant

Year of construction: 1999, condition: used, Loading height: 850mm, basket dimensions: 670x480x300mm, max. batch weight: 150kg, exhaust air volume: 200m³/h, throughput: approx. 8-10 batches/h, rinsing temperature: 70-80°C, max. drying temperature: 130°C, number of immersion tanks: 2, power supply: 3x400V/50Hz, connected load: 58kW, system height: 2300mm, height of side structure: approx. 2200mm, left system section: approx. 1000mm, main system section: approx. 2800mm, right overhang: approx. 400mm, length: 3200-4200mm, width: 1800mm, height: 2300mm, operating hours: 43,294h, components: working chamber, immersion tank I, immersion tank II, oil separator, drying unit, filter. An on-site inspection is possible. Nledpfx Abo Adt Ikeujh

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Nljdpfx Abe Admbdoush Chip conveyor Measuring probe

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Clamping surface: 500 x 400 mm Tool magazine for 24 tools, SK 40 Nodpfx Ao Admbwjbuolh Spindle speed: 8,000 rpm NC rotary and tilting table Chip conveyor

Condition: new, Year of construction: 2027, Machine in LIKE-NEW condition! Geometry inspection according to DIN 8609 12-month warranty for all damages Control system: conventional / Siemens PLC with rotary table control 4-axis digital display from Fagor / ACU-RITE or Heidenhain Njdpjcht Tnjfx Abujlh Complete electrical equipment 230/400 V, 50 Hz, German manufacturer, CE standard Technical data: Max. workpiece dimensions: - Diameter mm 3200 - Height mm 1600 (up to 2600 possible*) Max. workpiece weight kg 16000 Rotary table diameter mm 2800 Max. travel length - horizontal mm 1720 - vertical mm 1200 Number of steps for rotary table indexing 18 Rotary table speeds Siemens PLC or stepless (2 steps) Lenze control rpm 1.6-63 / 0-80 Support working feed: number of steps 18 Speed of cross slide adjustment mm/min 360 Max. support rapid traverse speed mm/min 2000 Max. rotary table torque kN/m 67 Power of main drive kW 55/75 Dimensions (L x W x H) mm 5490 x 7075 x 5100 Weight kg 43,000

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: used, technically overhauled in 2026 Technical data: Center height: 215 mm Nlodpfx Aey H Iqwsbueh Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Tailstock travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center - Geometry protocol

Condition: used, total length: 3,700 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.500 kg - Drive system: Conventional Nsdpfx Ajz Et Uasbuolh - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 2000 - Bed width [mm]: 385 - Spindle bore [mm]: 73 - Min. spindle speed [rpm]: 26 - Max. spindle speed [rpm]: 1100 - Options: Fixed steady, Removable bed, Three-jaw chuck, Travelling steady - Swing over removable bed [mm]: 750 - Transport dimensions: 3700mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 3,170 kg, Lathe, manufacturer Mexpol, model TUB 560 with position indicator. Nljdpe Afaa Ajfx Abueh

Condition: used, Year of construction: 2012, operating hours: 10,779 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 95 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 28,000 W, overall weight: 6,000 kg, Equipment: documentation/manual, NEF600 V3 - 5th Generation 2-axis universal lathe with C-axis - Main spindle: Integrated spindle motor - Turret: 12-station disc turret - Standard tool holder: VDI 40 - C-axis brake: hydraulic - Tailstock: Automatic - Coolant system: Coolant system with chip tray - CNC control: Siemens 840D SL ShopTurn and ERGOline control panel - CAD reader: External, PC-compatible - Hydraulic unit: Included in delivery for chuck and steady rest - Hollow chuck: hydraulic - Max. diameter of drawn tube: 95 mm - Coolant spray gun: Included in delivery - Chip conveyor: Discharge to the right - Discharge height of chip conveyor: 1250 mm - Steady rest: Self-centering steady rest Ø 50–200 mm - Chuck: 3-jaw power chuck SMW KNCS 325 - Tool spindle 1: Driven tool holder angled by 90° - Tool spindle 2: Straight 0° driven tool holder - Application of tool spindle: Drilling, milling, and threading - Standard tool holder shank: DIN 69880-40 Nsdpfxo Afabgs Abuslh - Cooling of the control cabinet: up to 40 °C - DMG Netservice on board Various VDI tool holders can be purchased as optional extras. These are NOT included in the price.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 C-axis table rotation 360° B-axis table swivel -50° / +110° Spindle nose - table distance 150mm Table clamping surface Ø650 Table load max. 300kg Table slots 5 x 18H7 x 100 mm Centering bore Ø50 H7 x 30 mm Workpiece size max. Ø 520 x 330 mm Machine accuracy VDI I DGQ 3441* Positioning accuracy +/-0.006mm* Axis resolution 0.001mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive AC motor, direct drive Drive power (100% / 25% ED) 10.0/17.0 KW Speed range, stepless 20-12000 RPM Spindle taper SK 40 DIN 69871 Torque at (100% / ED) 63.7/108.6 Nm Axis drives: Axes X, Y, Z AC motors Axes B, C AC motors Travel speeds: Rapid traverse in axes X, Y, Z 36m/min Speed max. B-axis 25 RPM Speed max. C-axis 25 RPM Acceleration X, Y, Z 6.5m/s² Coolant system: External tool cooling via external nozzles Coolant tank 280l Operating pressure, external 0.9bar Coolant system, internal tool cooling DIN69871 Form A Operating pressure, internal coolant supply 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control Heidenhain iTNC 530, full simultaneous 5-axis configuration -Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Scraper conveyor with discharge height 800 mm • Spindle cooling - radiators - plate cooling for spindle motor - Full protective enclosure with canopy Tool magazine VZG 65 5A from Indunorm: Nlodpfoz Diq Ujx Abueh Number of tools 100 with a tool length of up to 320mm / Convertible to 125 tools, then only 200mm tool length is possible. Tool diameter max. 80mm Tool diameter max. 130mm (with free adjacent spaces) Tool change with double gripper -Linear path measuring system in axes X / Y / Z (glass scale) -Direct encoder in axes B / C -Temperature compensation - IR measuring probe - 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double cartridge filter • Switchable filter cartridges • Filtration rating 10my Belt filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: 100 kg (35 kg) Handling weight max. Pallet capacity: 6 pallet spaces up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance 180mm - Clamping force 4x12500N - Repeat accuracy 0.005mm - Axial load max. 4000kg • Zero point clamping plate 320 x 320 -Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, power chucks, and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary through-feed integrated in the table • pneumatic lines routed to the outside • Pneumatic maintenance unit • Control via M commands logical inputs/outputs prepared incl. 12 pallets 320x320 !!without tool holders and without tools!! WITHOUT clamping devices such as vises, etc. !! Machine ex works, without delivery and assembly, all information without guarantee, price plus legal value-added tax.