Used Universal Machine for sale (84,314)

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine Nwjdev Tywqopfx Ah Uor The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, x-travel 315 mm y-travel 180 mm z-travel 320 mm 5 14 mm ISO 40 DIN 2079 45 - 1950 U/min flute distance 10 - 170 mm/min no. of flutes 4 m/min total power requirement 5,1 kW distance between table/spindle 1400 kg diameter of rotary table 3000 x 2700 x 1800 mm Nwjdpfxoxwdvhj Ah Uer - Robust/powerful universal milling machine - HEIDENHAIN digital display - Coolant device

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system Nwedpfxsw D Hmlo Ah Ujr - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Njdpod R Dpmofx Ah Uewr Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Year of construction: 2003, Universal cylindrical grinding machine with internal grinding attachment Year of manufacture: 1991, geometrically overhauled in 2003 Technical data: Table: Centre height: 180 mm Max. grinding diameter: 360 mm Between centers: 1500 mm Max. automatic table travel: 1580 mm Hydr. table speed: 0 – 3000 mm/min Max. table swiveling range: ± 5° Workpiece headstock: Workpiece spindle speeds: 30 – 300 rpm Workpiece spindle taper: MT 5 Tailstock taper: MT 4 Max. swiveling range: 90° Grinding spindle head: Spindle speeds: 1450 – 1600 rpm Grinding wheel diameter/bore: 450 x 127 mm Min. / max. grinding wheel width: 20 - 50 mm Max. swiveling range: 90° Min. automatic grinding head infeed: 0.005 mm Internal grinding attachment: Spindle speed: 17,000 rpm Spindle diameter: 60 mm Min. / max. grinding diameter: 18 - 100 mm Max. grinding depth at large diameter: 130 mm Motor power: Grinding spindle head: 5.5 HP Internal grinding attachment: 1 HP Dimensions and weight: Machine dimensions L x W x H: 4200 x 1400 x 1500 mm Machine weight: 3300 kg Accessories / Special features: • Manual or automatic operation • Internal grinding attachment • 3-jaw chuck • 1 fixed steady rest • Wheel dresser • 2 additional grinding wheel flanges • Balancing arbor • Wet grinding attachment The hydraulic table cylinder has just been newly sealed. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Nedpoxama Usfx Ah Uewr

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm Nedoxcblqepfx Ah Uewr workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. Nwedpow U N Rtsfx Ah Uor The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 Nwjdsvuz Rujpfx Ah Ujr control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm From a training center (“Daimler Chrysler AG”) Completely overhauled in 2006 for approx. 33,000 euros Includes new HEIDENHAIN “124” control Very little use since overhaul (!!) Operating hours – “machine ON” only: 10,407 hours Features: - Electric CNC universal tool milling machine - HEIDENHAIN TNC 124 linear control (installed in 2007) * Swiveling control panel, front right of the machine - Electro-hydraulic tool changer - Vertical milling head - ISO 40 with vertical work spindle * Manual spindle feed .. 50.0 mm * Scale ring for reading the quill adjustment - Horizontal work spindle incl. counterholder - Rapid traverse feed X-axis .. 0 - 4000 mm/min - Rapid traverse feed Y-axis .. 0 - 2000 mm/min - Rapid traverse feed Z-axis .. 0 - 4000 mm/min - Central lubrication, electric - Pneumatic minimum spray device (lubrication system) - Coolant device - Machine stand with base - Machine light - Original operating instructions + circuit diagram + acceptance report, etc.

Condition: used, Year of construction: 2003, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain TNC 430 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Nodpsxylqrsfx Ah Uswr Prior sale reserved.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps. Nwodpofdzupofx Ah Uor

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Njdpfx Aoxy Styoh Uewr Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: good (used), 3-axis visualization at 5µ resolution, fitted with protective enclosure Table surface: 1435 x 460 mm Travels: 1100 x 700 x 500 mm (LxWxH) Number of T-slots: 5 Spindle SA40 from 30 to 2066 rpm Spindle motor with brake for safety 2 emergency stop buttons Full spindle guarding Automatic lubrication Nsdoxxz Anepfx Ah Uswr 3 automatic movements and 3 rapid movements Rapid traverse speed: 2800 mm/min Power: 10 hp, 380 volts Lighting, coolant system with separate settling tank Front control panel with emergency stop button Machine in perfect condition Machine weight: 3500 kg

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Nwedpfsr Ixq Rsx Ah Usr Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2022, operating hours: 10 h, condition: new, Universal testing machine H5TMC mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Nwedoiq Hw Uspfx Ah Uor Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Njdpfx Ahsxgdr Is Uewr

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Nwodpfjd R Dpuex Ah Uer Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: used, Year of construction: 1990, machine/vehicle number: BPF 1741, Lg. No. 25312 Technical Data: Nedpfxox Exzqo Ah Ujwr - Edging machine for raising right-angled edges - Suitable for straight, round, and curved sheet metal parts. - Drive: 400 V - Space requirement: approx. W 650 x H 1250 x D 650 mm - Weight: approx. 200 kg

Condition: used, Year of construction: 1989, grinding diameter 200 mm grinding length 620 mm centre height 100 mm Njdpfxox H Tuns Ah Uewr grinding wheel diameter 350 mm grinding wheel width 50 mm bore 127 mm work piece spindle speed 65-500 U/min grinding head swivelling 360 ° grinding spindle head - swivable 5° + - ° +-8 ° longitudinal feed of the table 620 mm table speeds 0-5 m/min total power requirement 5 kW weight of the machine ca. 2,6 t Delivered overhauled in 2023. Used very little Geometrically overhauled and new painted. -internal grinding device included. -2-axis digital read out Heidenhain -tailstock with cylindricity adjustment. -2-axis DRO Heidenhain -cooling unit (paper tape) Accessories see fotos

Condition: new, Worktable ----- 1320 x 320 mm Spindle intake vertical ----- ISO 40 Spindle take-up horizontal ----- ISO 40 Spindle speed vertical ----- 45 - 1660 rpm (11) Spindle speed horizontal ----- 40 - 1300 rpm (12) Displacement X ----- 1000 mm Displacement Y ----- 260 mm Traverse Z ----- 450 mm Distance vertical spindle - table ----- 220~670 mm Unloading ----- 200~760 mm Milling head rotatable ----- 360° Table feed X axis ----- 20~360 mm/min Table feed Y axis ----- 20~360 mm/min Iron feed Z axis ----- 400 mm/min T-slot ----- 14 mm Motor power ----- 3 KW / 400V Weight ----- 2100 KG INCLUDING * 3-axis digital readout SINO Nwsdpsrzuctsfx Ah Usr * Luxury control panel * LED lighting * Cooling system * Central lubrication * Milling cutter 32 mm * CE hood * ISO40 collet holder including collets * Various tools

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) Nodpjmdpafefx Ah Ujwr max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm Nwodpoxv D Uzofx Ah Uor weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm Nsdpfx Aoghtvaoh Uowr - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: new, Year of construction: 2025, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Nedpsxdbxyefx Ah Ujwr Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: working area width: 510 mm (optional widening: +240mm / +530mm) max. test stroke without test tools, adapter and KMZ: 1095 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 800 mm/min at full load Nwodpoiq Hxcsfx Ah Usr Return speed 800 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. Nwedpfxsmdn Trs Ah Ujr The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement: