Used Vdf 250 for sale (18,523)

Year of construction: 1977, condition: used, workpiece weight 279 KG Gkjdpfx Agjrfd U Rj Nec length ca. von Bett bis Lynette mm 189 € . max durchlass 369 mm

Condition: good (used), Year of construction: 2008, turning diameter over cross slide: 365 mm, turning diameter: 570 mm, spindle bore: 62 mm, Manufacturer: VDF BOEHRINGER Type: DUS 560 Ti Control: SIEMENS 810D Year of manufacture: 2008 Specifications Gkodpowp Ifmefx Ag Njc Metric US Standard Turning diameter bed Ø 570 mm Turning diameter slide 365 mm Turning length 2000 mm Spindle bore 62 mm Spindle power 25 kW Quill 100 Ø Quill stroke 190 mm Spindle taper 4 Mk Workpiece weight 2500 Speed 2500 Rpm Feed X - axis 5000 mm/min. Feed Z - axis 10000 mm/min. Dimensions (Estimated) Length 4300 mm Width 2100 mm Height 2100 mm Weight 5800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend you verify all important details.

Condition: ready for operation (used), empty load weight: 25,000 kg, total length: 12,400 mm, total width: 2,800 mm, total height: 2,700 mm, additional equipment features: yes, turnable support on carriage auto feed on cross-slide for conical turning operations lathe with clutch 3 steadies Distance between centers: 8000 mm Swing over bed: 1800 mm Swing over cross-slide: 1320 mm Swing in gap: 2200 mm by 600 mm Gsdpfxowygmko Ag Nokc Diametre of main spindle bore: 90 mm Power on main spindle: 55 kW Chuck (3/4 pinch) -- diametre: dia 1600 mm Max weight between centers: 25 000 kg

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Godjugtv Ispfx Ag Nokc Specification: Tonnage: 250 T Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: good (used), turning diameter over cross slide: 255 mm, spindle bore: 56 mm, turning diameter over bed slide: 430 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 19 rpm, power: 7.5 kW (10.20 HP), Centre distance: 1.000 mm Swing over bed: 430 mm Swing over cross slide: 255 mm Godjtx Tuwopfx Ag Nskc Spindle speeds: 19 - 2.000 RPM Spindle bore: 56 mm Featured with: - Various Multifix toolholders - Coolingpomp Country of origin: Germany Motor power: 7,5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: excellent (used), For sale: a robust hydraulic press from the renowned manufacturer Vogel & Co Pressenfabrik Berlin-Borsigwalde. Model: 40×250 Gkedpow Rc Hmsfx Ag Nsc Machine number: 1715 Maximum pressure: 40 tons Oil capacity: 150 liters The machine is in good technical condition, complete, and comes with a control panel. Sturdy, stable construction – ideal for industrial applications in pressing, forming, or assembly. Electric power supply, hydraulic drive. Mounted on a pallet for easy loading. Condition: used, fully operational, with normal signs of wear.

Condition: good (used), Year of construction: 2001, Manufacturer: VDF Wohlenberg Type: V-Model Year of manufacture: 2001 Maximum swing 500 mm 3 x adjustable bronze rollers 2 Matching steady rest Specifications Metric US Standard Fixed steady rest Fixed Min. diameter 50 Max. diameter 500 Center height 500 mm Dimensions (estimated) Length 1200 mm Width 800 mm Height 1200 mm Weight 800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations should be assumed. We recommend that you check all important details. Share on Gksdswrrbwepfx Ag Njc

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Gksdowx Hktopfx Ag Njc Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Gkedpfxsw Uf Tkj Ag Nsc Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, Year of construction: 1972, Center height 265 mm Gsdpfopmtf Usx Ag Nokc Center width 1000 mm Swing diameter over bed 540 mm Swing diameter over cross slide 280 mm Bed width 403 mm Spindle bore 65 mm Spindle mount DIN 55027 Gr. 8 Speed range, 24 levels 9 – 1800 rpm Feeds, 32 longitudinal 0.063 – 2.24 mm/rev ditto, 32 face 0.032 – 1.12 mm/rev 66 metric threads 0.25 – 560 mm 60 Whitworth threads 80 – 1/16“ 60 module threads 0.1 – 50 module 40 diametric pitch threads 160 – 0.5 pitch Tailstock mount MK 5 Drive power 15 kW Dimensions L x W x H 3550 x 1300 x 1550 mm Weight 2800 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, type of input current: AC, overall weight: 1,090 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 250 kVA, Equipment: type plate available, Oil transformer according to Ecodesign Directive (Tier 2). The transformer has not been in operation so far. Gkjdpjwnfgfjfx Ag Nec 12 month warranty

Condition: excellent (used), Year of construction: 2004, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / Universal lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of construction 2004 Turning length approx. 2200 mm Swing diameter over bed 1,000 mm Swing diameter over bed 1,000 mm Centre height over flat track 500 mm Gksdpfx Agjud In He Noc Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Infinitely variable three-phase motor (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control Manualplus 4110, completely renewed approx. 1 to 2 years ago renewed 2 lynchets Equipped with roto power chuck, diameter approx. 500 mm. Including many accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix basic holders, size D. Machine was equipped with a separate milling device, with its own control, value approx. 20.000,00 €. OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Only operated by the owner, very good condition!

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 570 mm, workpiece weight (max.): 2,500 kg, Swing over bed Ø: 570mm Swing over cross slide Ø:365mm DBC Turning Length: 2000mm Gkjdpfx Aewq I Udjg Njc Spindle bore: 62mm Spindle power: 25kW Tailstock spindle Ø: 100Ø Stroke pinole: 190mm Spindle taper: 4Mk Workpiece weight: 2500 Speeds / ranges: 2500Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 10000mm/min. Length: 5200mm Width: 2200mm Height: 2100mm Weight: 5200kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MK 15982, center width: 700 mm, overall weight: 18,000 kg, TECHNICAL DETAILS General Data Distance between centers: 700 mm Maximum swing diameter: 200 mm Specification Lathe with tools: 4 Suitable for: 3-cylinder crankshaft Gkedpfx Agowx E Tmj Njc MACHINE DETAILS Machine weight: approx. 18 t EQUIPMENT Lathe with 4 tools only for 3-cylinder crankshaft

Condition: good (used), Bezel moving, moving bezel, steady rest, Lynette Gsdpodna Afefx Ag Nekc -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Condition: good (used), Year of construction: 1973, Center height 310 mm Center width 1700 mm Swing diameter over bed 620 mm Swing diameter over cross slide 390 mm Spindle bore 80 mm Bed width 500 mm Speed range 9 - 1800 rpm Longitudinal feeds 0.08 - 2.8 mm/rev Cross feeds 0.04 - 1.4 mm/rev Metric thread 0.5 - 448 mm Inch thread 80 - 1/16 Gg/“ Modular thread 0.1 - 50 M Diametric pitch thread 0.5 - 160 DP Quill diameter 100 mm Tailstock mount MK 6 Drive power 22 kW Dimensions L x W x H 4400 x 1440 x 1700 mm Weight approx. 4,500 kg Accessories / Special features: • Feed via cross connection • Large, heavy quick-change holder with 6 inserts for turning tool height 40 mm • Coolant system • Machine lamp • EMERGENCY STOP switch Gksdpfx Agen I Rnle Nec Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE-44143 Dortmund - Wambel

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- Gkedpfsvzkyljx Ag Noc 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: excellent (used), Year of construction: 1989, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / WOHLENBERG PT1-1070II Heavy-duty lathe Very good condition heavy duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Type PT1-1070II Year of manufacture 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Santer turret geometry Turning diameter over bed 1,070 mm Turning diameter over support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm Quill diameter 200 mm Quill stroke 350 mm Spindle clearance 128 mm Chip conveyor Boring tower incl. boring bar Length approx. Ø 200 x 2,430 mm Gedpfsud Ipkjx Ag Njkc Face plate 1,000 mm Steady rest 4 quills 500 mm open Main drive motor 71 kW incl. documentation

Condition: good (used), turning diameter over cross slide: 365 mm, turning length: 2,000 mm, Manufacturer: VDF BOEHRINGER Type: DUE 560 Year of manufacture: 1995 Feeds in 3 directions 3 Axis HeidenHain Dro X/Z/Zo Multi fix tool system with inserts Housing on back side machine CE-Mark machine Specifications Metric US Standard Turning length 2000 mm Turning diameter bed Ø 570 mm Turning diameter slide 365 mm Spindle bore 62 mm Spindle power 15 kW Gksdpfxov Ia H Us Ag Nec Bed width 360 mm Quill 90 Ø Spindle mount 5 Mk Speed 2240 Rpm Dimensions (estimate) Length 4500 mm Width 1525 mm Height 1389 mm Weight 4500 kg Please note: The information on this page has been provided to the best of our knowledge and belief by us and, as far as possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Gjdpfx Aotttigeg Nekc Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: used, Boehringer VDF 25m-4, CNC lathe, used machine Manufacturer: Boehringer Model: VDF 25m-4 Year: 2001 Weight: 18,700 kg with chip conveyor with oil mist extractor Gkedpfxew Nbgio Ag Noc Chuck size: 400 mm Power: 40.3 kW Max. spindle speed: 4,000 rpm Turning diameter: 450 mm Swing over bed: 700 mm Distance between centers: 750 mm Control: CNC (Siemens)

Condition: used, Year of construction: 1972, turning length 2000 mm Gksdpfx Ageuap Uae Nec turning speeds 1400 U/min centre height 315 mm turning diameter 630 mm Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Year of construction: 1996, condition: ready for operation (used), We have spare parts for CNC lathe Gedpfogqurbox Ag Nokc VDF Boehringer cm180. Following parts. Turret head price:1500,-€ Tailstock price:1000,-€ Main headstock price:3000,-€ ball screw X and Z axis price:1000,-€ axis motors X and Z price:3000,-€ Main spindle motor price:3250,-€ Hydraulic system price:1200,-€ Chuck 250mm with clamping system Price:1800,-€

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 Gkodpfx Agod Ewaao Nec With accessories and equipment documentation.