Used Vdf Heidenreich U Harbeck for sale (5,604)

Condition: excellent (used), Year of construction: 1989, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / WOHLENBERG PT1-1070II Heavy-duty lathe Very good condition heavy duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Type PT1-1070II Year of manufacture 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Santer turret geometry Turning diameter over bed 1,070 mm Turning diameter over support 710 mm Hnsdpfeud Ipksx Ag Nju Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm Quill diameter 200 mm Quill stroke 350 mm Spindle clearance 128 mm Chip conveyor Boring tower incl. boring bar Length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Steady rest 4 quills 500 mm open Main drive motor 71 kW incl. documentation

Condition: good (used), Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm Hjdpfx Aodna Afsg Nonu -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Hsdpohgg Eujfx Ag Nenu Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2019, condition: new, Brand C&U Group Shanghai Bearing Co Ltd Model: TM6307/41RS Year of manufacture: Unused Weight (kg) approx 6790 net Number of pieces in stock 17350 ( approx ) Made in China Comments Contact us for min. quantity Hnjdeqa Anqopfx Ag Neu Terms of sale Contact us for min. quantity

Condition: good (used), Year of construction: 2000, Internal item no.: 25041 VDF-Boehringer VDF 250 CM Year of manufacture: 2000 Control: Siemens Sinumerik 840C Hnodpfx Agswzazdo Nju Speed range: 30 - 3000 rpm Turning length: 1000 mm Swing diameter over bed: 550 mm Swing diameter over cross slide: 480 mm 12-position turret 6 driven stations Mount: VDI50 Spindle bore: 90 mm + Power chuck SMW Autoblok 315 (without soft top jaws) + Approx. 10 driven tools + Approx. 10 centre points (for tailstock) Dimensions (approx.) LxWxH: 580 x 270 x 270 cm Weight: approx. 11 t

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible . Hnedpjtttigefx Ag Nsu

Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min Hodpfx Agjuap Uaj Nenu centre height 315 mm turning diameter 630 mm Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Condition: used, Door closer, floor door closer, locking body -Manufacturer: GU BKS, floor door closer UTS 42, unused, original packaging -Article No.: 50031099 Hnjdotzrfrspfx Ag Neu -Door width: 1100 mm -Number: 3x door closers available -Price per piece -Dimensions box: 360/100/H95 mm -Weight: 3 kg

Condition: good (used), Year of construction: 1986, turning diameter: 1,260 mm, * Distance between centers: 11000 mm * Roll diameter: max. 1260 mm Hnedpjuh Slksfx Ag Nou * Max workpiece weight: 22.4 T

Condition: used, System: Used tank Material: PP Length: 2.13 m Height: 2.30 m Width: 1.60 m Volume: approximately 7.83 m m³ Hnedpfob E Dfisx Ag Neu Connections: DN 25, DN 50 and DN 80 s photo

Condition: used, Boehringer VDF 25m-4, CNC lathe, used machine Manufacturer: Boehringer Model: VDF 25m-4 Year: 2001 Weight: 18,700 kg with chip conveyor with oil mist extractor Chuck size: 400 mm Power: 40.3 kW Max. spindle speed: 4,000 rpm Hnjdpfx Aew Nbgisg Nju Turning diameter: 450 mm Swing over bed: 700 mm Distance between centers: 750 mm Control: CNC (Siemens)

Year of construction: 1996, condition: ready for operation (used), We have spare parts for CNC lathe VDF Boehringer cm180. Following parts. Turret head price:1500,-€ Hedsgqurbspfx Ag Njnu Tailstock price:1000,-€ Main headstock price:3000,-€ ball screw X and Z axis price:1000,-€ axis motors X and Z price:3000,-€ Main spindle motor price:3250,-€ Hydraulic system price:1200,-€ Chuck 250mm with clamping system Price:1800,-€

Condition: new, We offer here items that we describe as well as possible, as well as post meaningful photos. Further details about the article can not be made. STONE WOOL 10kg / per bag INSULATION WOOL FIRE PROTECTION WOOL STUFFING WOOL OVEN WOOL OVEN INSULATION MATERIAL LOOSE WOOL OVEN INSULATION MATERIAL We offer the possibility to visit Tuesday and Friday in the time between 9 and 16 o'clock after making an appointment by phone. If necessary, the article can be taken away immediately. Due to time constraints, we can offer answers to this article only if you provide us with a telephone number in your request. This offer is, unless specifically described, NEW GOODS. Items have been visually inspected and are top ok. Prices: 19,- € net / per piece 10 kg bag with a minimum purchase of 25 bags. Hnjdpfx Agshqrq He Nou (current stock approx. 500 pieces) corresponds to 1,90 € net per kg rock wool If you wish other quantities, please contact us in writing. All prices are offered here as net price plus the currently valid value added tax All offers ex stock 47441 Moers. If you wish shipping, please contact us to discuss packaging and shipping costs. Item description: offered here: STONE WOOL 10kg / per bag INSULATION WOOL FIRE PROTECTION WOOL STUFFING WOOL OVEN WOOL (NEW GOODS) FURTHER NOTES see photos MATERIAL NO: 630151 EUROCLASS A1 Manufacturer: KNAUF and others

Condition: good (used), Year of construction: 1972, machine/vehicle number: 4224-06, center height: 240 mm, space requirement width: 1,600 mm, space requirement length: 2,650 mm, space requirement height: 1,200 mm, turning diameter: 200 mm, VDF Gebr. Boehringer 42D (WAG 831) Drawbar Lathe Manufacturer: VDF Gebr. Boehringer Hnsdpfx Agswfqwdo Nju Model: 42 D Year of manufacture: 1972 Machine No.: 4224-06 General information / technical specifications: Used drawbar lathe from VDF Gebr. Boehringer Lathe chuck: Forkardt Ø250 mm wedge bars (power chuck) Center length / center width: 1000 mm Turning diameter: 200 mm (over support) Center height: 240 mm Spindle bore: approx. 62 mm Dimensions (h x w x d): 1200 mm x 1600 mm x 2650 mm Accessories: 2x Multifix brackets 2x clamping jaws Various turning tools Further information: Multifix Type B installed Including coolant device with tray

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 435 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 640 mm, center width: 1,500 mm, turning diameter over bed slide: 640 mm, swing diameter over cross slide: 435 mm, quill stroke: 190 mm, quill diameter: 100 mm, quill travel distance: 190 mm, center height: 320 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, swing diameter over bed slide: 640 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed length X-axis: 365 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, bed width: 1,800 mm, workpiece weight (max.): 1,600 kg, type of input current: AC, travel distance cross slide: 365 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 315 mm, torque: 640 Nm, travel distance X-axis: 365 mm, travel distance Z-axis: 1,500 mm, workpiece weight between centers: 1,600 g, spindle diameter: 100 mm, workpiece diameter between centers: 640 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Hjdpfxewywxdo Ag Nenu Swing diameter over cross slide: 435 mm Travel of cross slide / top slide: 365 mm / 145 mm Center height over flat bed: 320 mm Distance between centers: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Turning tool section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (overall): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed rate transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Metric thread pitches: 0.1–400 mm Quill diameter / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Setover tailstock center: Ø 150 mm Workpiece weight (max.): Between centers: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4" color LCD, showing (among others) spindle speed, feed rate, position, tool, load

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) - Rectangular design, with discharge screws to the funnel Hsdpfxot Ay Scs Ag Njnu - Dimensions: Length 9700mm, width 3500mm, height 6100mm

Condition: reconditioned (used), We are offering an exceptionally good precision lathe. The machine is probably the best German lathe that has been built in this class. Hjdjrt T S Rjpfx Ag Njnu BOEHRINGER precision lathe model DUE 800 Year of manufacture: 1984 Order no.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter over facing slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar passage: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. Torque: 6300 Nm 24 Speeds: 7.1 - 1400 rpm 60 face feeds: 0.05 - 28 mm/rev 60 longitudinal feeds: 0.06 - 56 mm/rev Rapid traverse in longitudinal cross feed Motorized top support Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital readout HEIDENHAIN Coolant device; chip protection rear panel, power chuck autoblock 500 mm with clamping jaws, roller conveyor cover for lead screw support to bed, machine light, chip conveyor, Parat basic holder incl. 11 holders, suction unit, 3-jaw steady rest with roller inserts (moving), emergency stop, chuck key, moving center point, operating instructions Condition: The machine is in very good technical and optical condition. Backlash in the top slide 0.1 mm and face slide 0.15 mm The geometry of the machine is also very good (was checked with a dial gauge) Measured on the flat track guide with dial gauge in the direction of the lathe chuck Bed wiper replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins on motor/gearbox side replaced, shaft seals on lock case replaced, various bearings replaced The machine can be demonstrated under power. Functional videos can also be sent on request.

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Hnjdjd Ewaaspfx Ag Nsu Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 With accessories and equipment documentation.

Condition: new, Year of construction: 2005, Grinding spindle type: SFAA-K-200 x 450 - 140x700 Manufacturer: Spindellagerungstechnik Fraureuth GmbH Length: 700 mm Hnedpfx Asvd Dkpeg Neu In use, order as stock.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Hnedpfsv R Hamsx Ag Nou Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: good (used), We offer 3 used underride silos, with ladder, blow-in pipe. 60 tons. Hnedpstiy Dnefx Ag Nou

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Cutting tools not come. Hnjdpferpk Rmox Ag Nsu

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2002.1023-01, turning diameter: 420 mm, center width: 1,200 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens Sinumerik 840, Extensive accessory package included! TECHNICAL DETAILS Turning diameter: 420 mm Center distance: 1,200 mm Spindle bore: 51 mm Speed: max. 3,000 rpm Center height: 210 mm Control: Siemens Sinumerik 840 MACHINE DETAILS Hsdpfxjwa Rnfj Ag Nenu Dimensions (L x W x H): 2,700 x 1,300 x 1,800 mm Weight: approx. 3,500 kg Power supply: 400 V - 3 AV - 50 Hz EQUIPMENT - Steady rest - Collet chuck 173E (Ortlieb) - Parat base holder - 14 Parat tool holders (WD2/25) - Machine feet - Schunk Rota-G D200 key bar chuck - Live center - Machine documentation (operating manual / programming manual / Electrical circuit diagram / data backup on CD)

Condition: good (used), Year of construction: 2011, operating hours: 1,525 h, functionality: fully functional, machine/vehicle number: SP091110K/W09SSA220BLSF8002, fuel: diesel, cubic capacity: 6,600 cm³, stroke length: 127 mm, cutting length (max.): 1,000 mm, cutting width (max.): 700 mm, Equipment: crane, Second splitting cross included (value approx. €15,000) Hnjdpfx Agswi H Ige Neu TECHNICAL DETAILS Splitting stroke: up to 1,000 mm Splitting pressure: approx. 80 t Splitting cross: 24-way Hydraulic saw drive: Hultdins Super Cut 100 Saw bar: Oregon Harvester Log diameter: up to 700 mm Log length measurement: available Double cut: available Drive and control system Control system: Siemens PLC Diesel engine: available Displacement: 6,600 cm³ Conveyor and material handling Chain conveyor: approx. 5,000 mm Sorting star conveyor: hydraulically adjustable Chip blower: available Feed table (W x L): 4,000 x 6,000 mm Chain transport including separation: Available Crane Crane: EPSILON M 100 L Use: Fully hydraulic timber loading crane Control: Radio control Chassis Tandem chassis: 18 t / air braked Control valve: 6-way including joysticks MACHINE DETAILS Operating hours: 1,525 h

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Hedpfx Aovcqtzsg Njnu Periphery: wort aeration, mixing pump, booster pump (water),