Used Vep Construction Machine for sale (75,011)

Condition: new, power: 1.2 kW (1.63 HP), color: blue, overall weight: 294 kg, maximum load weight: 500 kg, load capacity: 500 kg, Zallys Jack 1200W 1/22 electric tractor is the ideal solution to avoid manual handling of loads and speed up the movement. - for loads up to 500 kg - for towing up to 1500 kg - versatile and compact - with pneumatic wheels for indoor and outdoor use - optional button for 2-speed adjustment - wide range of standard accessories or customizable on request Max. Forward driving speed (standard version) 10 km/h Max. Driving speed forward (with upgrade)12 km/h Max. driving speed Max. driving speed reverse (standard version) 8 km/h Max. driving speed Max. driving speed reverse (with upgrade) 10 km/h Load capacity in level 500 kg Max. Pulling capacity in level (standard version) 500 kg Max. Max. traction capacity in level (with upgrade) 1.500 kg Max. gradient with load *15 Max. tractive force on hook (standard version) 500 N Max. tractive force on hook (with upgrade) 1500 N Braking distance at deceleration (without load) 6 m * Load capacity depends on slope, type of ground and operating time If the force on the hook in N remains the same, the following circumstances can change the tractive force of the machine (specified in kg): the nature of the ground, the use of ballast, and the type of wheels with which the machine and truck are equipped. Batteries 2 Battery type - AGM traction battery 12 V Nominal capacity 5 h - 105 Ah nominal capacity 20 h - 130 Ah Battery weight 33 kg Gearbox mechanical Gearbox 1:25 rear drive electronic service brake electro-mechanical parking brake weight without battery 143 kg empty weight incl. 105/130A AGM batteries 209 kg empty weight incl. 200/240A AGM batteries 267 kg Iajdpok Dzzksfx Aadon Length 2.000 mm Width 814 mm height handlebar / drawbar 1175 mm seat height / saddle height 860 mm loading area height 510 mm wheelbase 1418 mm turning circle 3200 mm

Condition: excellent (used), Year of construction: 2017, PERII production pallets, dimensions 1200x1100x50 mm, quantity 4,000 pcs, price given per piece, condition B – good. Iedjx Hdpiopfx Aadoan

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition Isdpjdzp T Dsfx Aadean The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), functionality: fully functional, empty load weight: 411 kg, digging bucket width: 1,750 mm, Year of construction: 2015, machine/vehicle number: 2015-2222, Cseri, German manufacturer, tiltable ditch cleaning bucket, MS 08 mount, capacity 360 liters. Iodpsw Aguyofx Aadean

Condition: like new (used), Year of construction: 2008, Tipping Device and Concrete Spreader VOLLERT WECKENMAN Year 2008 Never used Lifting device capacity: 5 tons. With synchronized control Concrete spreader cover: 7.5 tons, with internal blade auger Iodpfxjxza Nfj Aadjan In perfect condition

Condition: used, Year of construction: 2010, Loading silo for asphalt mixes 270 tons with bucket conveyor - separate loading silo for various asphalt mixes - capacity: 270 tons Iodpfx Aov H R Tpeadean - with bucket conveyor and bucket - can be attached to any existing system - control system

Condition: used, functionality: fully functional, mileage: 27,000 km, power: 400 kW (543.85 HP), gearing type: automatic, fuel type: gas, color: grey, overall weight: 800 kg, Year of construction: 2011, operating hours: 27,000 h, machine/vehicle number: MAN E2876 LE 302, E2876 LE 301, Gas CHP (Combined Heat and Power) units, 2 x 195 kW electrical, 2 x 255 kW thermal, fuel consumption 51.6 m³/h. Iajdew D A Ryjpfx Aadsn

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: SN061476, 12 months warranty, except for the engine. Iaedpfxsw Ia Rwj Aadsn

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 20 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control Iasdpfjur N Dtex Aaden On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 15 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Iajdpour N Aiefx Aadon Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. Iaedpfjwzlwksx Aadon The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Cordless angle grinder M18 FSAG125X-0X Cordless circular saw M18 FCS552-0 Cordless reciprocating saw M18 FSZ-0 LED cordless hand lamp M18 TLED-0

Condition: new, functionality: fully functional, empty load weight: 2,800 kg, operation weight: 2,800 kg, Year of construction: 2024, New pulverizer for excavators from 25 - 40 tons. 360 degree rotatable. Isdpfxjwnxr Ue Aadoan

Year of construction: 1999, condition: good (used), functionality: fully functional, End milling machine for portal construction ready for use Ijdpfx Aashzt Nhedsan

Year of construction: 2007, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Ijdpfou U Hf Esx Aadoan Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again

Condition: used, Year of construction: 2005, Rebar line with numerical control, used, in good condition. Ijdpfx Aaswny Idjdsan

Condition: new, Year of construction: 2025, New MW2000 / NX-5 model with 360° hydraulic rotator. Self-propelled pile driver for PV farm posts by Mazaka, 9.15 m mast, DEUTZ 85 kW engine! MAZAKA MW2000 / NX-5 • Engine – DEUTZ, Stage V emissions standard • Engine power: 85 kW • Noise level: 109 dBA • Steel tracks HAMMER • Model: MZK65, 1650 Joules • Impact rate: 350-700 blows/min • Oil flow: 70-100 L • Hammer weight: 750 kg HYDRAULIC SYSTEM • Oil tank: 200 L • Oil flow rate: 50-100 L/min Ijdsw Rvlvjpfx Aadean • Oil pressure: 225 bar • Fuel tank: 120 L UNDERCARRIAGE SYSTEM • Speed 1: 2 km/h, speed 2: 4.4 km/h MAX. POST HEIGHT • Post height: 9,150 mm • Side shift: 100 - 100 mm • Pile cap: 145 x 95 mm included in the machine price (other sizes available at extra cost) TRANSPORT DIMENSIONS • Height: 2,280 mm • Width: 2,280 mm • Length: 3,600 mm • Weight: 7,950 kg • Ground clearance: 500 mm • Mast tilt: +20° / -150° • Side tilt: +15° / -15° 360° ROTATOR • Rotation speed: 0 - 5 rpm • Hydraulic rotator system Net retail price including transport: €215,000.00 Optional equipment (at extra charge): • Automatic levelling system – €4,400 net • Post puller – €2,200.00 net • Rock, concrete, and asphalt auger complete with 203 mm / 6-inch bit and DTH mounting bracket – €18,500 net

Condition: new, functionality: fully functional, Year of construction: 2025, Brand new, self-propelled solar pile driver by Mazaka. The model is designed with a compact chassis – making it ideal for transport and intensive use. Mazaka is a brand recognized by professionals throughout the EU, USA, and Canada. ONE UNIT AVAILABLE IMMEDIATELY FROM STOCK. DISCOUNT POSSIBLE! CONTACT US FOR DETAILS. MAZAKA Self-Propelled Pile Driver MW1200 CW Isdpsw Rvinofx Aadean Engine Brand: YANMAR TIER 5, 35.4 kW, Model: 4TNV88C-YDEH2 / EU Stage V Noise level: 108 db Hammer Model: MZKK65 – 1,450 Joules Blow rate: 350–700 bpm Hammer weight: 750 kg HYDRAULIC SYSTEM Oil tank: 150 L Oil flow: 50–100 L/min Working pressure: 180 bar Fuel tank: 50 L MACHINE SPEED Speed: 2.2 – 4 km/h PANEL HEIGHT Maximum panel height: 6,100 mm Side shift Standard pile head template (other profiles available on request): 125–125 mm / 100–60 mm DIMENSIONS Height: 2,770 mm Width: 2,290 mm Length: 3,660 mm Weight: 4,750 kg Mast tilt: +10° to -63° Side tilt: +10° to -10° FUEL CONSUMPTION Diesel: 2.5–3.5 l/h Retail price including transport Net: €101,000 Optional equipment at extra cost: • Automatic leveling system – €4,100 net • Post puller – €2,000 net • Additional pile head template per buyer’s technical drawing – €1,600 net • Rock, concrete, and asphalt auger with 203 mm bit and DTH 6" mounting kit (drilling depth approx. 1,650 mm in 5–10 min): €16,000 net. Note: Rock drilling requires a 14 bar / 14 m³ compressor (not included). • Auger for soft soil (150 x 1500 mm or 200 x 1500 mm) with rotary head, complete – €4,500 net

Condition: new, Year of construction: 2024, Gyrustar bucket separators - Screen instead of disposing! For excavators and loaders from 1 - 30 tons. Best screening result Screen instead of breaking! Iajdpfxev Hd A Rj Aadon Gala construction Cable construction Screening bucket

Condition: like new (used), functionality: fully functional, Year of construction: 2023, 2 x Steel modular Delta I-V side forms L=30m – 75.000 euro/piece Ijdpox Dbzhofx Aadsan Delta beams: Max length: 30m Max width: 640 (with the possibility to make 620/600/580) Max Height: 125cm (minimum 106cm) Slope: 3% Height 150 in the center and 160 at the start/end 1 x Self reacting prestressing bed 75m x 1,25m. – 175.000 euro PRESTRESS BEDS Dimensions: 75m x 1.25m The complete prestressing installation consists of the following elements: the bed, an active stressing head, a passive stressing head, steel end blocks and a set of 2 cylinders 300 Ton optional extended with a hydraulic pump. Useful length of the beds: 75m Width of the beds: 1250 Capacity of beds: 1600T THE ACTIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T THE PASSIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T HYDRAULIC CYLINDERS 2 cylinders x 300T Rings foreseen for blocking during loading. Steel calibrator blocks: Dimensions: 1m25 x 0m50 Capacity: 600T Number of holes: 168

Condition: like new (used), functionality: fully functional, overall weight: 510 kg, Year of construction: 2024, operating hours: 8 h, machine/vehicle number: DSM800S, For sale: Professional planetary grinder Schwamborn DSM 800S – one of the top models for concrete floor processing, ideal for large-scale applications and continuous operation. Technical specifications: • Model: Schwamborn DSM 800S • Working width: 800 mm • System: planetary, 3 heads • Voltage: 400 V Iaodpfx Aaewr Dm Eeden • Operating hours: 8 • Year of manufacture: 2024 • Purchased as a demonstrator from the official distributor • Condition: excellent – virtually new • VAT invoice: yes • Location: Wrocław, Poland The machine is ready for immediate use – no additional investment required. It has only been used for demonstration purposes (not by us, but by a Schwamborn technician). On-site inspection and testing are possible. _____ Please feel free to contact me – I'll be happy to answer any questions and provide additional photos or a video of the machine in operation.

Condition: used, Year of construction: 2006, machine/vehicle number: 21741076, JCB loader frame, axles, hydraulics. Iodpfx Aaov Immuedsan

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating Iodpfx Aex D Df Neadjan - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Iaodpfxox D Dbks Aadon Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis • Plug-in Electrical Installation • Turn-key ready to use

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. Iedpfx Ajx D A R Deadsan • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes Iodpfxjx D A Rks Aadsan - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.