Used Versatile 500 for sale (17,316)

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria Kedpsxmrwfsfx Abvsnc ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Kodpfx Abez Sluzovonc Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (2.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a cutout for the hanger 380V power supply Weight: 195 kg

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine Perfect condition, manufactured in 2021. Only 3,636 bindings used. Semi-automatic spiral binding machine from the German company RENZ: • Controlled by a touchscreen display • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustment from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • KA-300 Hanger Feeder • Quiet operation. The machine does not require a compressor. • Working width: 105-500 mm • Mobile, easy to move • Includes a receiving table • No special operator training required Knjdpsz R Ir Sefx Abvsc 230V power supply Weight: 550 kg

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex-works: Tool milling machine MAHO Type MH 500 M Year of manufacture 1989 Heidenhain digital display Table 800 x 360 mm SK 40 Kode Aa Il Nepfx Abvonc Spindle speeds 63 – 4000 rpm Quill travel 50 mm Travel distances X/Y/Z 500/380/350 mm Drive 3 kW Feeds 10 – 1000 mm/min Coolant system Weight 1600 kg Accessories: Hydraulic vice Price: Euro 2,500.00 plus VAT, ex-works.

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Ksdpfx Asy E Hy Ujbvenc Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Technical specifications: Manufacturer: Karl Tränklein GmbH Kjdpfx Ajz Sm Uwsbvenc Model: ZW 500 Year of manufacture: 1990 Serial number: 8083 Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical specifications: * Manufacturer: Weinig, Germany * Model: Powermat 500 * Year of manufacture: presumably 2005 (final inspection 25.11.2005) * Machine type: Four-sided planer / profiling machine * Spindles: At least 6 tool positions identifiable * Spindle speed: 8,000 rpm (according to the label) * Control: Electronic Weinig control with color display * Workpiece feed: Automatic * Spindle adjustment: Partially motorized with digital position indicators * Extraction: Several extraction connections available Equipment: * Electronic control with color display * Program management for various planing and profiling operations * Digital position indicators * Several planing and profiling spindles * Automatic workpiece feed * Pneumatic pressure elements * Adjustable workpiece guides Kjdpfx Aj Aaw S Sjbvonc * Enclosed safety guard with viewing window * Infeed and outfeed area * Several extraction connections * Emergency stop switch Application areas: * Four-sided planing of solid wood * Production of window and door profiles * Manufacturing of frame timbers * Production of glass beads * Production of baseboards and decorative profiles * Series production of profiled timbers Inspection possible by appointment * Sale in its current condition * Dismantling and loading upon agreement * Transport by the buyer

Condition: new, Year of construction: 2023, type of input current: three-phase, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Kodpjy Sw T Sofx Abvsnc

Condition: good (used), Renz Punch SU 500 Perforator Knodpjz Rk Iiefx Abvsc This machine is in very good condition. The set includes a base for the machine. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforating machine with a working width of up to 500 mm Designed for continuous operation and heavy loads Function cycle activated by a foot pedal Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforating strips Available with or without a cutout for the hanger Power supply: 3-phase, 380V. Weight: 170 kg.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Kjdszb Aktspfx Abvjnc Summa F1432 Summa F1612 Summa F1832 Summa F3220 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), For sale: an industrial deburring machine from the German company Rolei Eisenblätter GmbH, model PEF 500. This device is designed for the precise removal of burrs, chamfering, and preparing the edges of steel, aluminum, and other metal parts. Knsdpfx Absz Slc Eovoc Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust, steel construction V-shaped work table, ideal for guiding components Electric drive with safety switch Application: edge finishing, chamfering, weld preparation, burr removal after cutting and machining The machine is in good working order and technical condition. The construction is very stable, making it ideal for workshops, metalworking shops, tool rooms, and serial production.

Condition: excellent (used), mileage: 494,595 km, power: 375 kW (509.86 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 5,100 mm, loading space width: 2,480 mm, Year of construction: 2019, operating hours: 5,203 h, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, power mirror, traction control, trailer coupling, - 4. Valve - 5. Valve - Aluminum fuel tank - Rear work light - Front work light - Heated mirrors - Brake booster - DAB radio - Differential lock - High beam headlights - Windshield - Low noise - Enclosed cabin - Speed limiter Kjdpfx Absz Hwlfovonc - Cabin - Air suspension - Air-suspended seats - Air horn - Media system - Rotating beacon - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Power take-off (PTO) - Fifth wheel coupling Axle configuration Front axle 1: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 22,458 kg Payload: 9,542 kg GVW: 32,000 kg Functional Mast: Telescopic (8 sections) Mast length: 21 m Lifting capacity: 10,000 kg Number of valves: 4 Body manufacturer: HIAB X-HIPRO 408 E-8+LIER+ROTARTER CE marking: yes Condition Technical condition: very good Optical condition: very good VOLVO FH 500 8X4 TRIDEM + HIAB X-HIPRO 408 E-8 + ROTZLER CABLE WINCH SEMI-TRACTOR / FLATBED TRUCK – DETACHABLE FLATBED – 8X4 TRIDEM – 33,000 KG A very complete and versatile equipped Volvo FH 500 8x4 Tridem, suitable for use as a semi-tractor and flatbed truck, equipped with a detachable flatbed and a powerful HIAB X-HiPro 408 E-8 loading crane with a Rotzler Titan TC 2 cable winch. Thanks to the adjustable fifth wheel coupling, trailer coupling, and the available hydraulic, air, and electrical connections, this Volvo can also be used excellently with a semi-trailer or trailer. The 8x4 Tridem configuration, air suspension, and the liftable and steerable last axle ensure high maneuverability and versatile applications. GENERAL DATA Make: Volvo Model: FH 500 Configuration: 8x4 Tridem Type: Semi-tractor / Flatbed truck First registration: 28.03.2019 Mileage: 494,595 km PTO hours: 5,203 hours Technical weight variant: 33,000 kg Unladen weight: 22,458 kg Transmission: Automatic Suspension: Air-suspended Cabin: FH sleeper cabin CHASSIS & DRIVE - 8x4 Tridem configuration - Last axle liftable and steerable - Air-suspended - Technical weight variant 33,000 kg - Unladen weight 22,458 kg - Volvo Dynamic Steering - Automatic transmission - Auxiliary drive / PTO - PTO hours: 5,203 - Adjustable fifth wheel coupling - Trailer coupling - Hydraulic connections for semi-trailer - Compressed air connections for semi-trailer - Electrical connections for semi-trailer - Toolboxes on the chassis - Side deflectors on the chassis The combination of fifth wheel coupling, trailer coupling, and the available connections allows the vehicle to be used very flexibly for different transport tasks. DETACHABLE FLATBED The Volvo is equipped with a practical detachable flatbed. By removing the flatbed, the vehicle can be quickly converted from a crane-flatbed truck to a crane-semi-tractor. Length of the flatbed: approx. 510 cm Width of the...

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The set includes a chain and hook, as shown in the pictures. Technical specifications: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Lifting speed: 15.0 / 7.5 m/min Chain length: 11 m Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Motor speed: 2720 rpm Protection rating: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Knodsz Sny Espfx Abvjc Used hoist, in the condition shown in the pictures. Important information: one of the mounting bracket/ear elements is partially broken, which is clearly shown in the pictures. This damage does not affect the operation or performance of the hoist. Sold exactly as shown in the pictures. PRICE INDICATED IS FOR 1 UNIT.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Includes cooling system, dressing unit, and magnet. Knodpjz R Rpnjfx Abvjc

Condition: excellent (used), Price quoted per unit. Professional LeCroy 9354AL digital oscilloscope designed for advanced measurements and diagnostics of electronic circuits. The device is equipped with 4 measurement channels, a 500 MHz bandwidth, and a high sampling rate, making it suitable for research laboratories, electronics service centers, industrial automation, and R&D departments. Knsdpfxez Sm Eus Abvec Technical specifications: • Manufacturer: LeCroy • Model: 9354AL • Type: digital oscilloscope • Bandwidth: 500 MHz • 4 measurement channels • Sampling rate up to 2 GS/s • Acquisition memory up to 8 Mpts • BNC inputs • Built-in CRT screen Condition: Used device, fully functional. The oscilloscope starts up correctly and displays waveforms. Normal signs of wear and tear are visible, resulting from use and storage. Note: One of the plastic housing elements at the back has a crack. The damage is purely cosmetic and does not affect the device's operation or performance parameters.

Condition: used, Year of construction: 1990, TECHNICAL DETAILS Travel ranges X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Knsdpfez S Namjx Abvoc Work table Table size: 680 × 380 mm Control system CNC control: Philips 432 Feed rate and rapid traverse Feed rate range: 1–3,000 mm/min Rapid traverse: 6 m/min Spindle and tool holder Tool holder: ISO 40 Speed range: 20–3,150 rpm Main drive: 5 kW Milling head Swivel range of milling head: ±90° Performance data Total power requirement: 12 kW Machine weight: approx. 1.2 t Dimensions Space requirement: approx. 2.5 × 2 × 2 m EQUIPMENT Swiveling milling head Philips 432 CNC control

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Kedpfx Abez Slplsvonc Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Ksdpey Iaa Tsfx Abvjnc For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Kodpfx Aoz Il Ikebvsnc Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg External Reference: Steinbach & Holler - Lot 62

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Knsdpfsz Icznex Abvoc Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system.

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse - reverse gear - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) Knedpfx Absza Eipjvsc – reverse gear – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 1984, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 340 mm, cutting width (max.): 450 mm, control type: manual, roller diameter: 500 mm, pivoting range: 45 °, actuation type: electric, total height: 1,950 mm, total width: 700 mm, year of last overhaul: 2026, Equipment: CE marking, For sale is a SAC BW 500 bandsaw manufactured in 1984. The machine is located at my premises, is fully functional, and can, of course, be inspected and tested before purchase. A recent DGUV-V3 inspection has been successfully completed. The machine has been inspected and is ready for operation. The bandsaw is secured to a pallet, making it easy to transport and allowing it to be conveniently loaded onto our forklift for pickup. Technical data: - Manufacturer: SAC - Model: BW 500 - Year of manufacture: 1984 - Motor power: 2 kW - Speed: 2,800 rpm - Electrical connection: 380 V / 50 Hz - Current consumption: 3/7 A - Saw blade width: 16 mm - Throat depth: 340 mm - Cutting width to the left of the fence: up to 440 mm - Cast iron wheels: 500 mm diameter - Wheel rubber coating: still in good condition Saw table and fence: - Solid cast iron table, swiveling by 45° - Table width: 700 mm - Table depth: 550 mm - Aluminum fence ruler: - Length: 670 mm - Height: 140 mm Machine dimensions: - Height: 1,950 mm - Width: 880 mm - Depth: 700 mm Condition and pickup: - Fully functional - Recent DGUV-V3 inspection - Can be inspected and tested on site while powered - Secured to a pallet - Loading with a forklift is possible The 500 mm cast iron wheels still have a good rubber coating on which the saw blade runs. The SAC BW 500 is a solid, classic bandsaw for woodworking and is suitable for workshops, carpentry shops, or ambitious woodworking projects. Knedpoz S H Stjfx Abvec Inspection and functional testing are possible by appointment. Pickup on site. The machine can be loaded onto a suitable transport vehicle using a forklift. If you have any questions, please do not hesitate to contact me.

Condition: used, Year of construction: 2015, turning diameter max. 240 mm turning length 470 mm control 840 D sl Operate 4.8 Celos greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 780 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 13 / 14 kW max. Torque 171,5 / 192 Nm inner draw tube diameter 52 mm C-Axis 0,001 ° spindle diameter in front bearing 100 mm spindle nose FL 140H5 Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 12,6 / 16,2 kW max. Torque 48 / 62 Nm inner draw tube diameter 37 mm C-Axis 0,001 ° spindle diameter in front bearing 90 mm spindle nose FL 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. tool taper VDI 30 Spindle speed - driven tool stations max. 5.000 min -1 power capacity - driven tool-stations 4,18 kW max. Torque 16 / 20 Nm y-axis 80 (+/- 40) mm x-axis 145 mm y-axis 80 (+/- 40) mm z-axis 520 mm z2-Axis 550 mm rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ) 4,5 / 4,5 / 7,5 kN total power requirement 30 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 7,0 x 3,0 x 2,2 m CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 V6 - Only approx. 11,139 spindle hours - External chuck flushing system for the main spindle - External chuck flushing system for the counter-spindle Coolant supply through the counter-spindle Ksdpfxoz S Nyao Abvsnc - Coolant spray gun - Bar machining package Workpiece unloading device with conveyor belt (left-hand side) for parts up to 51 mm in diameter and 185 mm in length, max. 3 kg Hydraulic hollow clamping system Draw tube inner diameter: max. 52 mm 4-color signal light Connection for bar feeder or bar loading magazine - Preparation for external handling Electrical robot interface (Profibus) Automatic work area door Chuck flushing system with coolant (main spindle)

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Kjdpez Sqiiofx Abvsnc Technical Specification Stamping Force 5000 Kn

Condition: used, This listing is for Amersham BPG Chromatography Column 100/500 The unit is in full working condition and ready for immediate use. This lab-scale column offers high-performance fluid dynamics and scalable design, making it ideal for robust downstream processing and reliable chromatographic separations in professional laboratory environments. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. For more chromatography columns please click here ?q=chromatography Popular Uses include Kodjzqf Dmopfx Abvenc – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products