Used Vertical Broaching Machine for sale (65,912)

Condition: good (used), Year of construction: 2006, operating hours: 21,565 h, functionality: fully functional, machine/vehicle number: 107.37.00.165, total height: 2,700 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 7,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,697 h, spindle motor power: 10 W, number of spindles: 1, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Offered here is a CNC vertical 5-axis machining center from the manufacturer Mikron, featuring a workpiece pallet pool with 7 pallets. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 600 Vario Year of construction: 2006 Control system: Heidenhain iTNC 530 Technical data: Travel ranges X-Y-Z: 600x450x450 mm Max. rapid traverse: 22 m/min Max. feed force X and Y axis: 5 kN Max. feed force Z axis: 7 kN Rotary table C-axis: 360° Swivel range A-axis: -115° to +30° Gksdpfx Ako Aivkashsd Table surface: 450x450 mm Max. table load: 200 kg Magazine positions: 30, fixed coded positions Tool holder: ISO-B40 Max. tool length: 250 mm without taper Max. tool weight: 6 kg Tool diameter: 90 mm fully loaded / 130 mm partially loaded Spindle speed: 12,000 rpm Power: 15 kW at 44% duty cycle, 10 kW at 100% duty cycle Machine dimensions: 3300x2400x2700 mm (excluding pallet pool) Weight: 7,700 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Spindle oil cooler 1x Pallet pool with 7 work pallets 1x Renishaw measuring probe OMP60

Condition: ready for operation (used), Year of construction: 2008, Make: DECKEL MAHO Type of machine: DMC 635 V Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Tool holder: SK 40 x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Godpfxe Ah Spws Akhskd Speed range: 10.000 U/min max. Table load: 600 kg Operating time: 22.646 h Spindle operating time: 8.241 h Table dimensions: 790 × 560 mm Number of tools in the magazine: 24 Plätze Internal coolant supply: 20 bar

Condition: used, Year of construction: 1995, travel distance X-axis: 585 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 554 mm, overall weight: 3,500 kg, Heidenhain TNC 355 BT40 spindle 18-tool changer Gedoylh Nvspfx Akhjkd travels 585X406X554MM weight 3500KG

Condition: good (used), Year of construction: 2008, FOR SALE High-performance vertical machining center TOPPER - TONGTAI MDV-812 (Taiwan origin). Official technical specifications: • Model: MDV-812 (High-Speed / Moldmaking Series) • Year of manufacture: June 2008 (Serial number: 020851) • Numerical control: FANUC Series 18i-MB • Machining travels: X = 1,200 mm | Y = 800 mm | Z = 500 mm • Table dimensions: 1,320 × 800 mm • Maximum table load: 2,000 kg (2 tons) • Spindle connection: BT 40 taper • Power supply: 380 V / Three-phase / 50 Hz (Required power: 35 kVA) • Machine weight: 13,000 kg (13 tons) Included equipment: • Complete control panel mounted on an articulated arm Gjdpfx Ae Af Aqkskhokd • Multi-nozzle coolant system around the spindle • Coolant chiller / Cabinet air conditioner (Euro Chiller) • Remote electronic handwheel Condition: • Used machine in operational condition, sold as is.

Condition: used, Year of construction: 2011, x-travel 0520 mm y-travel 360 mm z-travel 360 mm Control 840 D Siemens tool taper HSK 63 spindle turning speed - stepless 36- 10.500 U/min tool magazin: 2 x 24 Pos. size of pallet 600 x 300 mm rapid traverse 60 m/min feed stepless 0-40000 mm/min total power requirement 37 kW Gkedpfx Aj Ai Ubvokhed weight of the machine ca. 9 t dimensions of the machine ca. 4 x 5 x 3 m Double spindle machining center with swivable table as a 4th axe. Machine has cooling through spindle with 40 bar.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MV0083-000047, overall weight: 5,500 kg, DOOSAN DNM 200/5AX – CNC 5-axis machining center – Year of manufacture 2015 Godpo Ahkdqofx Akhekd For sale is a well-maintained DOOSAN CNC machining center, model DNM 200/5AX, in very good condition. Technical data: Year of manufacture: September 2015 Travel distances X / Y / Z: 400 / 435 / 500 mm Spindle speed: up to 12,000 rpm Spindle power: 18.5 / 11 kW Rotary table diameter: 200 mm A-axis: +30° to −120° C-axis: 360° Rapid traverse rate X / Y / Z: 36 / 36 / 30 m/min Machine weight: 5,500 kg Connection: 380 V, 50/60 Hz

Condition: used, Hurco VMX 60 U 5 axes Vertical Machining Centre, new 2014. Used Hurco VMX60U 5-axis vertical machining centre, new in 2014. Gkjdo Aay Ucepfx Akhod HURCO VMX 60UI, VERTICAL MACHINING CENTRE, Table 500mm diameter table, C axis - 360 deg. Capacity L x W x H X= 1524 Y=660 Z=520mm / A axis - 30/-110 deg, Spindle taper BT40, Spindle speeds 12000rpm, Feed rates 24m/min, Rapid traverse rates 32, 32, 24m/min, 40 station tool changer, CNC Control Hurco Ultimax CNC, Total Power HP/KW 18kW, Serial Number H-VX6011, Year 2014, Electrics 380-440/3/50, Overall size: 5455 x 4590 x3124mm, Weight:8.5 tons, Made in Taiwan High-performance CNC machining centre with simultaneous 5-axis capability, ideal for complex precision engineering and aerospace components. Available now. Hurco VMX60U 5-Axis Vertical Machining Centre Available for sale is this Hurco VMX60U 5-axis vertical machining centre, originally manufactured in 2014. Designed for high-precision and complex component production, the VMX60U combines the flexibility of simultaneous 5-axis machining with Hurco's renowned conversational programming and CNC control technology. Hurco VMX60U 5-Axis CNC Vertical Machining Centre for sale, manufactured in 2014. This high-specification machining centre is equipped for complex multi-axis machining applications across aerospace, precision engineering and subcontract manufacturing sectors. Ideal for subcontract engineering, aerospace, automotive, medical and precision manufacturing applications, the VMX60U enables efficient single-setup machining of intricate parts, reducing cycle times and improving accuracy. The machine's universal swivelling spindle and integrated rotary table provide excellent access to complex workpieces, whilst maintaining the rigidity and reliability expected from the Hurco VMX series. Key Features Hurco VMX60U Vertical Machining Centre 5-Axis Machining Capability New in 2014 Simultaneous multi-axis machining Suitable for complex and high-precision components Ideal for aerospace, automotive and subcontract engineering sectors Hurco control system Stock Number: 113500 Located in the United Kingdom This used Hurco VMX60U CNC machining centre is available immediately. Contact Bowland Trading for pricing, availability and further technical information.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DMG Deckel Maho DMC 1035 V Vertical Machining Center. Gksdpfxszun Snj Akhed The machine is in very good optical and technical condition. Inspection while powered on is possible at any time. Technical data: Year of manufacture: 2008 Control system: Heidenhain iTNC530 Travel distances: X: 1,035 mm Y: 560 mm Z: 510 mm Clamping area: 1,200 mm x 560 mm Spindle speed: 10,000 rpm Tool changer: 20-position Tool holder: SK40 Coolant/air blast switchover Electronic handwheel Operating mode 4 Coolant tank free on truck ex works Hagen

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, table width: 500 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, Vertical Machining Center Manufacturer: MORI SEIKI Model: SV 400 Year of Manufacture: 1998 Control System: MSD-501 Technical Specifications: X-axis travel: 600 mm Y-axis travel: 430 mm Z-axis travel: 460 mm Table clamping surface: 900 x 500 mm T-slots (quantity x width x spacing): 5 x 18 x 100 mm Table load capacity: 500 kg Distance from spindle nose to table: 150 – 610 mm Spindle speed: 12,000 rpm Torque: 166.7 Nm Tool taper: BT 40 Number of tool stations: 30 positions Max. tool diameter: 80 mm Max. tool diameter (with adjacent pockets empty): 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Feed rate (X / Y / Z): 16,000 mm/min Rapid traverse (X / Y / Z): 32,000 mm/min Gkodpfe Aaq Umjx Akhjd The machine comes from its first owner and has low operating hours. It has been very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Through-spindle coolant (TSC) - Tool measurement system - 30-station tool changer (BT 40) Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Vertical Machining Center Fehlmann Model Picomax 60-M HSC Heidenhain TNC 530, excellent condition, CE certified! Technical Data: >> Year of manufacture: 2008, Machine No.: 14508674 >> Travel distances X/Y/Z: 505/355/610 mm >> Table surface (L x W): 920 x 380 mm >> Number of T-slots: 7 >> T-slot width: 12H8 >> T-slot spacing: 50 mm >> Permissible table load: 250 kg >> Distance between coordinate table and spindle nose: 84 – 694 mm >> Feed rate X/Y/Z: 1 – 20000 mm/min >> Tool holder: SK 30 >> Tool changer: 24 tools >> Spindle speed range: 50-20000 rpm >> Weight: 3350 kg >> Dimensions: 3.0 m × 2.4 m × 3.0 m >> Meter reading: Operating hours: 12,826 >> Meter reading: Spindle hours: 5,303 Accessories included with the machine: - Renishaw probing system OMP 40-2 with spindle adapter - Cool air nozzle for M-function, switchable - Direct linear measuring system with compressed air supply Gedpfx Ako Agabtshjkd - Thermal compensation - Compensation for spindle and thermal expansion - Ethernet interface - Laser system NT incl. blow-off nozzles for tool measurement and breakage detection - 4th/5th axis FEHLMANN ATS 160 CNC Automatic dividing table with double clamping in both axes and EROWA quick-change chuck ITS - Machine light - Spindle cooler - Handwheel - Coolant system with chip drawer and fine chip insert - Tools in the lower cabinet - Transport securing - Operating and programming manual (also for additional equipment) About the machine: Offered is a vertical machining center, Fehlmann model Picomax 60M HSC, in very good condition. The machine features a Heidenhain TNC 530 control system. Programming is particularly easy in the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented control systems that allow you to program conventional milling and drilling operations directly on the machine in an easily understandable plain text dialog. The accessories include a dividing head ATS 160, the 4th and 5th machine axes, with various mounting plates, operating manuals, and much more (see pictures). Mechanically and electrically inspected. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Gkedpjy N Du Dsfx Akhed Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Gksdjxtcz Iepfx Akhsd Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Condition: excellent (used), USED HARTFORD HB2190AG FANUC 21iMB YEAR USED - ORIGINALLY BUILT 2009 MACHINE SN 12842 DOUBLE COLUMN, BRIDGE TYPE VERTICAL MACHINING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS FOR ENHANCED CUTTING PERFORMANCE MACHINE CONSTRUCTION FEATURES & EQUIPMENT  ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION.  HEAVY DUTY HARDENED AND GROUND BOX GUIDEWAYS.  FULL HEIGHT SPLASH GUARDING.  MODIFICATION TO SPLASH GUARD TO ACCOMMODATE 4.1 M LENGTH OF PART.  INTERNAL SPIRAL CHIP CONVEYORS.  LINK TYPE CHIP CONVEYOR AND CHIP BUCKET.  Z-AXIS NITROGEN COUNTER BALANCE SYSTEM.  HARTROL-FANUC 21iMB CNC SYSTEM.  25 BAR THROUGH SPINDLE COOLANT.  COOLANT GUN.  CE MARKED TABLE Working Surface 2,100 X 1,740 MM Tee Slot (Size x Number x Pitch) TBA MM Maximum Table Load 7,000 KGS TRAVEL Longitudinal Travel (X-Axis) 2,000 MM Cross Travel (Y-Axis) 1,970 MM Vertical Travel (Z-Axis) 920 MM Distance from Spindle Nose to Table 160 ~ 1,080 MM Distance from Spindle Centre to Column 430 MM Width between Columns 2,200 MM SPINDLE Spindle Nose Taper #50 - DIN69871 Maximum Spindle Speed 6,000 RPM GEARED Spindle Drive GEARED FEED Cutting Feedrate (X, Y & Z Axes) 1 ~ 7,000 MM/MIN Rapid Traverse (X-Axis) 10 M/MIN Gsdpfx Ako Afnadshskd Rapid Traverse (Y-Axis) 10 M/MIN Rapid Traverse (Z-Axis) 10 M/MIN ATC Tool Storage Capacity ARM TYPE 40 STATIONS Maximum Tool Weight 15.0 KGS Maximum Tool Size Ø 125 X 350 MM Tool Shank DIN 69871 Pull Stud P50T-1 MOTORS Spindle Drive Motor (Fanuc) 26.0 KW POWER SUPPLY Electric Power Consumption 50 KVA Air Pressure 6.5 KG/CM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) TBA MM Height TBA MM Weight 28,000 KGS

Condition: used, BOEHRINGER / VDF NV 250 T is a CNC vertical turning machine designed for precision machining, high accuracy and reliability. Total axes 4; spindle hole 65 mm; travels Z 260 mm, X 760 mm, Y ±50 mm; rapid traverse X 120 m/min, Z 40 m/min; turret 12 positions VDI 40/DIN 69880. Spindle head A6; stepless up to 4500 t/min; spindle power 31 kW; voltage 50 Hz 3x 400 V; machine weight approx. 8500 kg. Equipment: 3-jaw chuck Ø250 mm with automatic centering, lamp, coolant system, oil mist extractor, automatic loading/unloading unit. Achieves tight tolerances; typical for automotive, aerospace, medical and machine tool sectors Gjdpfx Ake Adzhljhokd

Condition: used, Year of construction: 2005, functionality: fully functional, Weight 350 kg Gjdswg Huuspfx Akhskd Dimensions (L/W/H) 1930,0 × 1850,0 × 2490,0 mm x-axis 610 mm y-travel 305 mm z-travel 520 mm table length 760 mm table width 360 mm

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Gksdj Ai H N Ropfx Akhod Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: good (used), Year of construction: 2007, Vertical 3-axis CNC milling machine Work area (mm): 2180x865 Gsdpfxs Aii Rto Akhjkd Max. table load: 340 kg Travel (mm): X-axis: 2165 Y-axis: 860 Z-axis: 760 Spindle: Power (kW): 18 Speed (rpm): 10-12000 Tool holder: DIN 69871 SK-40 Tool changer: Automatic, 40-tool magazine Machine weight (kg): 16300 Dimensions (W/D/H): 5200x2700x3300 Coolant system: Knoll System

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 Gedpj Ai Tr Hefx Akhekd min. module: 0,5 x-travel: 100 mm y-travel: 160 mm z-travel: 100 mm A-Axis travel: -40 ... +40 ° speeds of tool: 300 - 4000 U/min workpiece turning speeds: U/min connected load: 48 kVA dimensions of the machine ca.: 5,3 x 4,2 x 3,4 m weight of the machine ca.: 6,5 t

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, Machine basic data Used 5-axis machining center from POSmill Manufacturer: POSmill Type: H 800 U Year of manufacture: 2018 Condition: very good Control system: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Travel distances: x-axis: 670 mm // y-axis: 820 mm // z-axis: 600 mm Technical data: Spindle: 20-18000 rpm HSK-A63 interface 96-tool changer C-axis (rotary table: diameter 800 mm) Swivel range of A-axis: +120°/-120° IKZ (internal coolant supply) Chip conveyor Gksdpfo Akcaxjx Akhjd

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar Godpfx Asy Ty A Sekhskd voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Gsdpfox Sr A Ujx Akhjkd Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor

Condition: good (used), Year of construction: 1999, CNC Vertical Machining Center MORI SEIKI SV – 400 Gjdpfx Asz D T I Rjkhjkd Control system: FANUC MSC-501 Travel range X-axis: 600 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mounting: BT40 Spindle speed: 12,000 rpm Drive power: 22/18.5 kW Tool magazine: 40 Table size: 900 x 500 mm Accessories: Preparation for internal coolant supply, high-pressure pump 20 bar, 2 x articulated band chip conveyor, 30-position tool magazine, 4-axis interface with rotary table Nikken CNC-200

Condition: used, Year of construction: 2008, Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation. Gjdpfoz Nwcksx Akhskd

Condition: good (used), Year of construction: 1998, Table size: 1150 x 510 mm Tool holder: BT 40 Travel distances: X-axis: 800 mm Y-axis: 510 mm Z-axis: 510 mm Speed range: max. 10,000 rpm Machine dimensions (L x W x H): 3200 x 2800 x 2497 mm Gsdpjyyq Niefx Akhekd Weight: 6,600 kg Accessories / Special features: • CNC control YASNAC J300M (comparable to "SIEMENS") • 30-station tool changer • Screw chip conveyor • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 412003, Year 2009 Fanuc MXP-100i 24-position tool magazine and chip conveyor Gkodpfxo Ahq Ifs Akhed Travels X / Y / Z: 1,020 / 600 / 600 mm Table dimensions: 1,120 × 600 mm Maximum table load: 800 kg Spindle taper: BT40 Spindle speed: 8,000 rpm Automatic tool changer Rigid Meehanite cast iron frame Coolant system for the machining area Full protective enclosure Electronic handwheel Work light 3 clamping vises Installed electrical power: 25 kVA Weight: approximately 6,500 kg