Vertical machining center

POS POSmill H 800 U

Condition: used, Year of construction: 2018, Technical details: x-travel: 670 mm y-travel: 820 mm z-travel: 600 mm control: HEIDENHAIN iTNC 530 table surface area: D= 800 mm KESSLER mm tool taper: HSK 63 Tool changer: 96 pos. table load capacity: 1200 kg turning speeds: 18.000 1/min rapid traverse: 60 m/min total connected load: 90 kVA weight of the machine ca.: 20 t dimensions of the machine ca.: 5 x 2,5 x 3,3 m 5-axis simultaneous machining center, table swivelling (A-axis) + / - 120°, rotary table (C-axis) axis 360 °, internal coolant supply 20 bar, 600 l with paper filter, chipconveyor, 3D infrared touchprobe, laser tool setting BLUM, el. handwheel Heidenhain, chiller for spindle, automatic roof, 5-Achsen Simultan Bearbeitungszentrum, 3x hydr. connection in table-center, 1x pneum. connection in table-center, interface for POS-Robo, POS DCM collision module, POS kinematic module, airblast through spindle, network and USB connection, rotoclear, direct measuring system, Gedszu R Iljpfx Ad Reui approx. 29.500 h "machine on" , approx. 10.000 h "spindle on" *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm -Y = 400mm -Z = 425mm Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Gedpfjwpcfuex Ad Rsui Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2021, Make: POS Type of machine: POSmill H 800 U Year of manufacture: 2021 Control system: Heidenhain TNC 640 Machine's weight: 20 t Tool holder: HSK 63 A x-travel: 670 mm y-travel: 820 mm z-travel: 600 mm Speed range: 18.000 U/min Godpfe Ahyd Nox Ad Rjui max. Table load: 1.200 kg Operating time: 20.954 h Spindle operating time: 11.514 h Table dimensions: 800 mm Number of tools in the magazine: 96 Internal coolant supply: 40 bar

Condition: used, Year of construction: 2017, rapid traverse X-axis: 60 m/min, total height: 3,800 mm, total length: 5,000 mm, total width: 3,900 mm, overall weight: 20,000 kg, table load: 1,200 kg, spindle motor power: 35,000 W, POS POSmill H 800 U CNC 5-Axis Machining Center Technical Data: Distance Spindle/Table: 120–720 mm Swivel Range A-Axis: ±120° Rotation C-Axis: 360° continuous Rapid Traverse Max.: 60 m/min Speed A-Axis Max.: 50 rpm Tool Holder: HSK A63 Tool Changer: 64 slots (standard) Tool Length Max.: 300 mm Tool Diameter Max.: 125 mm Tool Change Time Min.: 8.5 s Connected Load: 90 kVA Voltage: 400 V / 50 Hz Pneumatic Connection: 6 bar Machine Weight: approx. 20,000 kg (nameplate) Rapid traverse: 60 m/min Tool holder type: HSK A63 Travel Z-axis: 600 - mm Table load max.: 1,200 kg Travel X-axis: 670 - mm Weight approx.: 20,000 kg Table diameter: 800 mm Spindle speed: 18000 - rpm Number of tool locations: 64 Travel Y-axis: 820 - mm Spindle performance: 35 kW Tool Changer: Yes Gsdpe Agqr Njfx Ad Reui Dimensions (LxWxH) approx.: 5000 x 3900 x 3800 mm Year of construction: 2,017 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: Yes

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW Gjdpfx Adoz N Dhte Rjui • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Guodpfx Adsy I Tvnj Roi Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Coolant supply: 40 bar Godpfx Ajzb A Ekjd Reui MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

Condition: like new (used), Year of construction: 2021, operating hours: 3,573 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 480 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, swing diameter over cross slide: 300 mm, turning diameter over bed slide: 430 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year 2021) CNC turning machine with FANUC 0i-TF, 3,573 hours, like-new condition! Includes a parts collection device for transporting finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year: 2021 • Serial Number: S4E213351 • Control: FANUC 0i-TF incl. handwheel • Operating Hours: 3,573 h • Power-On Hours: 14,792 h (Control ON) • Machine Type: Single-spindle with parts collection device • Number of Tool Positions: 12-station VDI-30 axial turret with two hole patterns • Number of Axes: 2 (X/Z) • Chip Conveyor Interface: Yes, available • Condition: Like-new, fully functional (Inspected by EMCO technicians on November 9, 2026! - Inspection report will be provided upon request) • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center, an EMCO EMCOTURN E45 from 2021, with low operating hours of only 3,573 h, in very good condition. Special features: • Control: Modern FANUC 0i-TF control for easy programming including handwheel • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 carefully transports finished workpieces out of the work area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-station axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working area and travels: • Swing diameter over bed: 430 mm • Swing diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. workpiece length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-station VDI-30 axial turret with two hole patterns • Shank according to VDI (DIN 69880): VDI 30 Gujdpfxozkhuhj Ad Rji • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & Terms of sale: • CNC turning machine EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included • FANUC operating manuals and machine documentation • Loading with a forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. Gusdpfx Aexcwdvsd Rsi All tools and accessories are included. Inspection possible by appointment.

Condition: like new (used), Year of construction: 2023, operating hours: 140 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 14,000 rpm, operating hours of spindle: 45 h, spindle nose: BT40, number of slots in tool magazine: 60, Equipment: chip conveyor, CNC- milling center universal Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 50 2nd Complete Year of Manufacture: 2023 Control System: Celos with Siemens 840D sl Operate Technical Specifications: Travel Ranges: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm Main Spindle: Speed range – main spindle: 20 – 14,000 rpm Drive power – main spindle (100/40%): 20.3 / 14.5 kW Tool Changer: Tool holder: BT40 Number of tool positions: 60 pos. Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 140 h Spindle hours: approx. 45 h Gjdj Ain A Ijpfx Ad Reui Technical Features & Accessories: - Rotary table, capable of simultaneous operations - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 40 bar, consisting of: - Paper belt filter - 600-liter tank - Spindle rotary joint - Enclosure roof - Rotating viewing window - Rotary joint - Chip conveyor - Flushing gun for chip flushing - Coolant/blow-off air switch - Preparation for 3D quickSET - Infrared probe, Renishaw PP40 (if available) - Tool probe, Renishaw TS27R (if available) - Electronic handwheel (if available) Accessories, tools shown in the illustration, and clamping devices are included in the scope of delivery only if noted in the additional information.