Used Vertical Dryer for sale (9,247)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Njdoz St Hwspfx Abujlh Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar Nlsdjyy U I Nopfx Abueh 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm - Number of clamping slots: 4 Nedpj Afulmjfx Abuolh Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, machine/vehicle number: L2TAF0101, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, total height: 2,500 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 450 mm, table length: 860 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, input voltage: 400 V, input frequency: 50 Hz, Equipment: chip conveyor, documentation/manual, LEADWELL V-30 iV CNC Vertical Machining Center - Tool holder: BT 40 - Table with three T-slots - Includes documentation and chip conveyor Nlodpfe Afuu Ijx Abuoh The machine is equipped with a tool changer, including the tool holders from the changer. FCA D-94227 Zwiesel – loaded onto a truck.

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1050 x 530 x 510mm, Table 1300 x 550mm, Spindle speed 0 - 12000 rpm, Spindle taper Din 40, Spindle Motor 18.5kW, 30 station ATC, Mazak Matrix Nexus 2 control, Njdpfx Abjz Sqwmjuslh swarf conveyor, coolant, Low Volt light

Condition: ready for operation (used), Year of construction: 2008, operating hours: 411 h, functionality: fully functional, chuck outer diameter: 1,200 mm, spindle speed (max.): 300 rpm, spindle speed (min.): 2 rpm, turning diameter: 1,600 mm, Massa Heavy Duty Precision CNC Vertical Borer Model: VL-1200 ATC + C Control: Fanuc 18i TB Year: 2008 Max Swing Dia:1600mm Max Turning Dia: 1350mm Max Turning Height: 1250mm 4 Jaw Scroll Chuck Dia: 1200mm Nlsdpfszv T A Iex Abueh Table Speeds: 2-300 RPM 16 Station Tool Changer ‘C’ Axis 360 Degrees ‘C’ Axis Milling Spindle BT 50 Dimensions: 6300 x 4500 x 5800mm Weight: 33,000 KGS

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 660 mm, controller manufacturer: Milltronics, controller model: Centurion 7, total height: 2,740 mm, total length: 3,050 mm, total width: 2,440 mm, table width: 610 mm, table length: 1,016 mm, overall weight: 7,250 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 2007 Milltronics VM22 CNC Vertical Machining Centre Nledpfx Asz Rqcyobuoh Used 2007 Milltronics VM22 vertical machining centre for sale. Centurion 7 control, 1016 x 559 x 660mm travels, 8,000 rpm spindle, 24-tool ATC and tooling included. Manufacturer: Milltronics Model: VM22 Machine Type: 3 Axis Vertical Machining Centre Year: 2007 Control: Centurion 7 Includes: Large Selection of Tool Holders Machine Description Used 2007 Milltronics VM22 CNC Vertical Machining Centre available for sale. A substantial American-built 3-axis vertical machining centre offering a generous working envelope, 24-station automatic tool changer, 8,000 rpm spindle and the well-established Milltronics Centurion 7 CNC control. This particular machine is a VM22 Series B and is supplied with a large selection of tooling, making it an attractive package for general precision engineering, subcontract machining, toolroom work, mould work and batch production. The VM22 provides approximately 1,016mm X-axis travel, 559mm Y-axis travel and 660mm Z-axis travel, combined with a large 1,143 x 610mm table. Technical Specifications Manufacturer: Milltronics Manufacturing Company Model: VM22 Series: B Year: 2007 Machine Type: CNC Vertical Machining Centre / Vertical CNC Milling Machine Control: Milltronics Centurion 7 Number of Axes: 3 Serial Number: 9868 Axis Travels X-Axis Travel: Approx. 1,016mm / 40" Y-Axis Travel: Approx. 559mm / 22" Z-Axis Travel: Approx. 660mm / 26" The 40" x 22" x 26" working envelope is one of the defining specifications of the VM22. Worktable Table Size: Approx. 1,143 x 610mm / 45" x 24" The large table and 22" Y-axis travel provide useful capacity for larger components, multiple vices and production fixtures. Spindle Maximum Spindle Speed: Approx. 8,000 rpm Spindle Power: Approx. 24 HP / 18kW peak rating Spindle Taper: 40 Taper / CAT40-type specification The combination of a 40-taper spindle and substantial machine construction makes the VM22 suitable for both general milling and heavier material-removal work. Automatic Tool Changer Tool Capacity: 24 Tools The machine is equipped with a 24-position automatic tool changer, providing sufficient tooling capacity for multi-operation machining without frequent manual tool changes. Milltronics Centurion 7 CNC Control The machine is equipped with the Milltronics Centurion 7 CNC control. The Centurion series became particularly popular in toolrooms and general engineering companies because of its conversational programming capability while still supporting conventional CNC/G-code programming. This makes the machine particularly suitable for: One-off components Small-batch machining Toolroom work Subcontract machining Prototype manufacture Production milling Operators transitioning from manual to CNC machining Tooling Included A large selection of tooling is included with the machine. Electrical Specification Input Voltage: 400V Phase: 3 Phase Frequency: 50/60Hz Full Load Current: Approx. 50A Largest Load: Approx. 40A Approximate Machine Size & Weight Machine Length: 3,050mm Machine Width: 2,440mm Machine Height: 2,740mm Approximate Machine Weight: 7,250kg

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, Nedpfoz R Rbdsx Abuslh rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, Njdpfxsz Ha H Sj Abuslh C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: excellent (used), Dahlih MCV 1020 Vertical Machining Centre Specification Table Working surface 1250 x 660mm T slot (size x number) 18 x 5mm Max Table load 1000kgs Travel X Travel 1020mm Y Travel 550mm Z Travel 560mm Distance of spindle end to table top 150- 710mm Distance of spindle centre to column surgface 600mm Spindle Spindle Nose NT40 Spindle speed 8000/10000 RPM - TBC Feed Cutting Feed 1-10000 mm/min Nljdpfxsz R A Une Abush Rapid travel 20000 mm/min Min. Input Increment 0.001 ATC Toolholder BT40 Dimensions - 4500 x 3640mm Weight 6000kgs

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Nlsdpfx Abezy Ik Ieuoh Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Max Height Under Cross Slide 60" Turret Rise & Fall 36" Speeds 10.5 - 234 rpm With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Spindle taper DIN40, 30 ATC, Coolant, Low volt light, Swarf Conveyor Njdpfxsz Ha Ays Abuelh

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, Njdpfez Rz Nqsx Abujlh BT40 taper, swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Nsdpfx Abozg Iw Ieuslh Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Njdpfx Aez N H Enjbuelh Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) Nodjyug Hxjpfx Abuslh "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC Njdpfszzzwqox Abuslh spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant.

Year of construction: 2004, condition: used, Emmegi Comet Isola, 4 Axis CNC Vertical Machining Centre for Milling, Drilling and Tapping Aluminium with Emmegi CNC Control (Isac Cam Editor), Bed Length 6800mm, X Axis 5500mm, Y Axis 525mm, Z Axis 380mm, Pneumatic Vices and Auto Vice Positioning. S/No. M271748 (2004) Machine Weight 5300kg Nsdpfx Abez Rnwzouelh Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: defective spare-parts repository (used), Year of construction: 2001, travel distance X-axis: 390 mm, travel distance Z-axis: 435 mm, spindle speed (max.): 4,500 rpm, turning diameter: 220 mm, Vertical Turning Machine - Parts Donor Nodpfx Abszz S R Isuelh Manufacturer: EMAG Model: VL5 Year of manufacture: 2001 Control system: Fanuc 18i The machine has not been tested and is being sold as a source of spare parts. Technical data: - Turning diameter: 220 mm - X-axis travel: 390 mm - Z-axis travel: 435 mm - Tool holder: VDI 40 - Number of tool stations: 12 positions - Spindle speed: 4,500 rpm Accessories, tools, and workholding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, power: 18.5 kW (25.15 HP), travel distance X-axis: 1,600 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 815 mm, workpiece weight (max.): 2,300 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: Fanuc, Equipment: CE marking, documentation/manual, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Njdpju A U Nkefx Abuelh Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Njdpfjz Eh Nlex Abujlh Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: good (used), Year of construction: 2012, Traverses X Y Z; 1020 x 610 x 610mm, Table size 1200 x 600mm, Table load 700Kgs, Table to spindle 100-710mm Spindle taper BT40, Spindle speed 12,000rpm, spindle motor 18.5KW, 30 station ATC, Heidenhain TNC530, through spindle coolant, swarf conveyor Nedpfx Aboz Ehxgsujlh 4th and 5th axis unit.

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Nedpfxez N Alws Abuelh Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Nlodpozair Uofx Abush Descriptions - OSP 700M Spindle Speeds 7000 rpm BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Year of construction: 2023, condition: like new (used), Double sided with 6000mm capacity on either side Total of 12000mm total working/ storage capacity for elements 3m height capacity Complete with 2 special fixing arms for one element 4 off additional supports Nljdpfx Abeymnh Ujuoh Year - 2023 CE Condition - Never been installed. Condition almost as new