Used Vks for sale (90)

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Gsdpfx Aboxcngnsdoil Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Model: VK 20/1200 Motor: 11 kW Final bale size: 700 x 800 mm Bale weight: 200–350 kg Giedpfx Absxnzf Iodsl

Condition: excellent (used), Year of construction: 2017, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total width: 2,583 mm, total height: 3,994 mm, total length: 6,661 mm, Equipment: documentation/manual, HSM VK 4812 P Gjdpjx Ebzkjfx Abdeil Year of production: 2015 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, Year of construction: 2011, functionality: fully functional, COMPLETE BOTTLING LINE Product: Beer, water, and lemonade Output: 6,000 bph Rotation: Clockwise Depalletizer: Flema Star C-CL Year: 1996 Capacity: 500 cph Operating mode: Pneumatic, gripper with hooks Decrater: RICO UNO Year: 2010 Capacity: 350 cph Number of heads: 1 Number of pick-ups per head: 20 Interchangeable heads: - 1 head for NRW 0.5 l bottle - 1 head for 0.33 l Ale bottle - 1 head for NRW 0.5 l screw-cap bottle Decapper: ADELSKI Year: 1995 Capacity: 12,500 bph Cap type: Crown cork Washer-Dryer: Macero PAC CB 14-0.5l-R-7 LII Compact Year: 1998 Capacity: 7,500 bph Construction: Fully stainless steel Includes steam heat exchanger Bottle Inspector: SYSCONA Alkali LC 10 FD + Metal Detection Year: 2007 Capacity: 15,000 bph Monoblock: ICS-ARKOR Model: multiFILL-VK 24/6CR/6RA Year: 2011 Capacity: 6,000 bph Rotation: Counterclockwise Filler: 24 valves Filling system: Isobaric 2 Cappers: - Crown cork, 6 heads (pick-on-the-fly) - Aluminium screw cap, 6 heads (pick-on-the-fly) Labeler: ANKER Model: 1191/99/420R Year: 1999 Output: 7,000 bph Type: Rotary Rotation: Counterclockwise Number of plates: 8 Number of stations: 2 Labeling method: Cold glue Applicable labels: • Front • Back • Neck Case Packer: RICO Model: UNO 1-Head L-Machine Year: 2012 Capacity: 300 cph Number of heads: 1 Gedpox Ngqbjfx Abdoil Number of pick-ups per head: 20 Head type: Fixed Palletizer: Flema Model: Star C-LC Year: 1996 Capacity: 500 cph Product handled: Crates Head type: Magnetic Case Washer: RICO 2500 1-Bad Year: 2012 Capacity: 600 cph 2 CIP tanks of 600 liters each Year of manufacture: 2012 Steam heated for filler CIP, with plate heat exchanger Safety features included Code: NP 688

Condition: used, Inductive sensor, electronics sensor Gsdpod Tvufofx Abdoil -High temperature resistant: 230 °C -Cable length: 10 m -Manufacturer designation: Cable socket 10 m -Type: VK A0 69 41 -Number: 16x available -Price: per piece -Weight: 250 g

Condition: used, Year of construction: 1999, Overview  This KHS filling monobloc was manufactured in 1999. The filling monobloc is still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. It also includes an accumulation table. Technical data  Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Gijdpfx Aswvl Dgjbdsl

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Giedeu Hmacepfx Abdel Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: new, maximum load weight: 27,500 kg, overall weight: 35,500 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 2,060 mm, Year of construction: 2025, Equipment: ABS, Hinterachse 3: Reifenmaß: 435/50R19.5, Marke Achsen: BPW, Reifen Profil links außen: 100% Zuladung: 27,430 kg Loading capacity: 1360 x 255 x 106 cm Marke des Aufbaus: AKLU Pumpe: Yes === Information in English === Rear axle 3: Tire size: 435/50R19.5, Make axles: BPW, Tire profile left outer: 100% Carrying capacity: 27,430 kg Dimensions of cargo space: 1360 x 255 x 106 cm Make of bodywork: AKLU Pump: Yes new machine unused Brand: DIV. Year of construction: New Type: Twente Trucks AKLU Mega extendible car transporter RV camper loadramp Construction: Car transporter Id: VK HHD Price {¤): ¤ 51,000,- Gedpfx Aomnpc Iebdeil

Condition: new, empty load weight: 1,300 kg, maximum load weight: 2,200 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 7,330 mm, loading space width: 2,400 mm, loading space height: 2,300 mm, loading space volume: 40.3 m³, color: black, construction height: 2,300 mm, working width: 2,400 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, sheet steel sandwich body 40mm walls, braked, PVC floor, 3x sales hatch + bag storage, gas door, * IMMEDIATELY AVAILABLE * Sheet steel sandwich body 40mm walls, braked, PVC floor, 3x sales hatch + bag storage, gas door TECHNICAL DATA - Make: Other - Model: VK 35602523 - Vehicle type: Sales trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 597 x 240 x 230 cm - External dimensions (L x W x H): 733 x 250 x 293 cm - Floor loading height: 55 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,300 kg - Payload: 2.200 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Sturdy V-drawbar, hot-dip galvanized - Tandem axle - Floor plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales hatch on the right side with bag storage - Lockable gas door - Additional rear sales hatch with bag storage - PVC covering on the floor - Door in the front wall, lockable from the inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank - Maintenance-free rubber support legs - Maintenance-free rubber support legs on the front wall, lockable from the inside and outside. maintenance-free rubber spring axles from KNOTT - automatic reverse drive - KNOTT overrun device and parking brake - plastic mudguards - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light Accessories can be retrofitted at extra cost - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Giedpfxju Ht Tce Abdel

Condition: excellent (used), Year of construction: 2001, Used Bottling Line | Used Beverage Line | Soft Drinks NP 619 | PET KRONES LINE Speed: 12,000 Bph KRONES CONTIFORM 2001 BLOW MOLDING MACHINE Siemens: S5 Number of cavities: 10 Preform tipper Preform feeder AIR NATRI STM 2011 COMBIBLOC KRONES SUOPERBLOC 1993 VK PET 100 SV rinsing machine 100 pliers KRONES filling machine Giedpfx Abjtr Exusdel Capper 18 heads 1810 format Roll-fed labeler KRONES MIXER 1992 Capacity: 45,000 L/h Ability to produce CO2 Nitrogen Saturate and mix water with syrup DIMAC STAR F 2011 BUNDLER number of rows: 2x3, 3x4 DEVIDER 2010 PACKAGE TAPES 2001 INNOPAL KHS PALLETIZER 1999 single entry FRANPACK 1999 PALLET WRAPPER Type: rotary arm Pallet lifting

Condition: used, Inductive sensor, electronics sensor Gedjd Tvugjpfx Abdeil -High temperature resistant: 230 °C -Cable length: 20 m -Manufacturer designation: Cable socket 20 m -Type: VK B0 6F 41 -Number: 2x available -Price: per piece -Weight: 400 g

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Giodpfx Aborqar Sodsl

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climatic Test Chamber -70 to +180°C Giedeuuif Nspfx Abdsl Manufacturer: Vötsch Type: VTSR 7034/S Test Chamber Capacity: 335 liters Climatic Test Chamber Temp. Range: -70 to +180°C Line Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Current: 22 A Rated Power: 12.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of Manufacture: 2002 TK-11 Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), FRYMA MZM / VK - 50 Cream Manufacturing Plant This Plant with usable volume of 50 L is suitable for manufacturing creams, ointments and suppository masses etc and can also handle foamy products. Gjdpfx Aeuf A Rlobdsil Total volume: 73 litres Min. fill volume: 10 litres Homogeniser: Brienz RF 112 M - 2 - 4.0kW - max. 2,850 rpm Mixer - scraper: SEW FAF 37 - max. 28 rpm Manufacturer: Fryma Koruma Year of construction: 1998 Floor Space: 120 x 150 x 200 cm

Condition: used, Year of construction: 2000, Debarking unit type VK 32 !! Sale on behalf of customer !! Godpfxswwladj Abdjil

Condition: not inspected (used), Year of construction: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of Manufacture: 1967 Weight: approx. 3,000 kg General / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling with multi-spindle heads Drilling units: 4 units Station 1 – loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drill heads: multi-spindle drilling units Rotary table: mechanical indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic, via centric mandrel, workpiece Ø approx. 80 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special features: • Machine is designed for large-scale production Gijdpfxow H Rh Ss Abdsl • Features a robust cast iron machine table with lateral chip removal and separate coolant tank • Automatic safety guard door • Equipped with a 5-station rotary indexing table • Heavy cast iron machine table, ideal for the retrofit or rebuilding of a special purpose machine • Suitable for refurbishment or conversion

Condition: used, mileage: 318,310 km, power: 240 kW (326.31 HP), first registration: 12/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2025, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Anfragen gerne per WhatsApp * Seitenlader * HS Hersteller * SL- VK- F * Speedline Paddle * Kippbar * Radstand 4,20 m * Euro 6 * Automatik Getriebe * Klima * Federung: Blatt/Luft/Luft * ABS * Lenkachse Gsdouzcthopfx Abdoil * Liftachse * AD Blue * Rundumlicht * Differenzialsperre * el. FH el. Spiegel * Tempomat * Luftsitz * Dachluke * Mulitfunktionslenkrad * Reifen 315/70R22,5 ca. 20-30-20% * deutsches Fahrzeug * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm Gisdpswt Ry Ujfx Abdjl - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Year of construction: 1998, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (VK): R 404 A Gisdpfx Abouuin Rsdsl Refrigerant (TK): R 23 Year of Manufacture: 1998 TK 09 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, Workbench with sheet steel shelf and 10-year manufacturer's guarantee* Made in Germany - Beech multiplex board 750 x 700 x 40 mm, without back board - Base frame made of VK tube 40/40/2 mm - Sheet steel shelf 600 mm deep - Leg elements with plastic adjustment plugs - Surface load with evenly distributed load: 1000 kg - Standard workbench - 750 x 700 x 840 mm L x D x H - Ergo version - 750 x 700 x 900 mm L x D x H Giodpfx Abeubxxqodjl Available in 7 different basket colors: - Anthracite gray - Gentian blue - Fire red - Sky blue - Light blue - Light gray - Pure orange - Reseda green - Signal blue - Deep black * 10-year manufacturer's warranty. Wearing part excluded. This item is delivered free kerbside. Delivery time usually 5 working days. Free shipping within DE without islands.

Year of construction: 1999, condition: ready for operation (used), A complete bottle filling line for cold and hot products is available. Bottle types: 0.25l/0.33l/0.5l vegetable/0.75l Bordeaux/0.75l fruit oasis/1l VdF/1l PET hotfill. Closure types: 28er Alu-Anroll/33er TWO/43er TWO/PET closure. Products: Cold fill CO2/pressurized hot fill below 100°C/pressurized hot fill above 100°C. Carton outer packaging: tray/wrap-around, total line output: approx. 27000 bottles/h. 1) Bottle washer Niko 36.25.750.100, year of manufacture: 1999, control: Siemens S7, spare parts package: available. 2) Bottle filling machine KHS Innofill DNR80, year of manufacture: 1999, control system: Siemens S7 with HMI renewed in 2015, filling stations: 80, filling temperature range: 10°C-104°C, products: Soft drinks/mineral water/fruit juices, spare parts package: available. 3) Screw capper (connected to the KHS) Alcoa 15 VK, year of manufacture: 1999, cap types: 28 mm aluminum and 43 mm plastic caps, sorting units: 2, replacement spindles: available, spare parts package: available. 4) TWO capper Italmeccania/Crown S4BLH, year of manufacture: approx. 1993, control: Siemens S7, capper type: belt capper, spare parts package: available. Including suction unit and sorting unit for TWO sheet metal closures. 5) Tunnel pasteurizer/recooler Göbel Tuchenhagen K1-35-175, year of construction: approx. 1993, control: contactor control, heating zones: 3, cooling zones: 2, fresh water zones: 1, belt width: 3500mm, length: approx. 16000mm. 6) Drying tunnel Europool TF03, year of construction: 2007, control system: Siemens S7, blower: 3. 7) Krones Starmatic high-speed labeling machine, year of manufacture: 1991, control system: Siemens S5, spare parts package: available. 8) Sleever Krones, year of manufacture: 2007, control system: Siemens S7, sleeve dimensions X/Y: 139mm/149mm, sleeve magazine: available, spare parts package: available. 9) Wrap-around packaging machine Kisters 320/50, year of manufacture: 1999, control: Rexroth Indramat, packaging capacity: 50 cycles/min, packaging type: tray/wrap-around, spare parts package: available. Including a Nordson Problue 14 gluing unit and automatic glue conveyor. 10) Shrink tunnel Krones Schrinkmat 5000, year of construction: 2007, heating zones: 10, spare parts package: available. Including suction unit. 11) Indspect fill level label inspection machine, inspection method: Inclined seat inspection/fill tube detection/lid detection/fill level inspection/vacuum inspection and label inspection. 12) KHS Lord 1BSN2 palletizing system, year of manufacture: 1999, control system: Siemens S7, pallet formats: Düsseldorfer pallet/Euro pallet/industrial pallet, pre-grouping station: available. 13) 2-sided label printer Logopak 920 II PF, year of manufacture: 2004, label dimensions X/Y: 148mm/210mm. 14) Various conveyor belts for product transport between the above-mentioned machines. Documentation available. On-site inspection is possible. Godpfjwxfagsx Abdsil

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Gijdpfxow H I R Rj Abdsl Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0-201-06-9022, rotational speed (max.): 24,000 rpm, distance between spindles: 32 mm, working height: 950 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece length Single setup: max. 4,000 mm Pendulum setup: max. 1,375 mm Workpiece length for milling operations with 25 mm tool diameter Single setup: max. 4,175 mm Double setup: max. 1,950 mm Pendulum setup: max. 1,550 mm Workpiece width – front fence, operator side Milling with 25 mm tool diameter: max. 1,220 mm All units (except drilling head): max. 1,150 mm Workpiece width – rear fence Milling with 25 mm tool diameter: max. 1,730 mm All units: max. 1,600 mm Extension of consoles available as option, order no. VK 7375 Workpiece thickness Gisdpfx Abow Upu Sodsl Including clamping devices: max. 300 mm With standard clamps, unlimited: up to max. 60 mm Dimensions are not equivalent to the maximum possible processing sizes per unit – see separate tables Minimum workpiece size: Dependent on clamping devices, workpiece surface and contour Working height Bottom edge of workpiece: 950 mm Main spindle Power S6: 18.5 kW Power S1: 14.5 kW Tool holder: HSK F63 – DIN 69893 Tool weight: max. 6 kg including holder Tool length: max. 200 mm from lower edge of motor spindle Milling tool diameter: max. 180 mm Grinding tool diameter: max. 200 mm Speed range: 0 – 18,000 rpm Full torque: 0 – 12,000 rpm Full rated output: from 12,000 rpm Maximum speed: 24,000 rpm Disc tool changer Capacity: 18 positions Tool holder: HSK F63 Configuration option 1: 18 x max. diameter 130 mm Configuration option 2: 9 x max. diameter 180 mm and 9 x max. diameter 70 mm Drilling head Spindles: 17 Motor power: 4 kW, frequency controlled Speed range: 4,500 – 6,000 rpm Function: vertical drilling Stroke: 50 mm Drill spindles: up to max. 35 mm drilling diameter Spindles X-direction: 11 Spindles Y-direction: 7 Spindle spacing: 32 mm Total drill length: 70 mm Shaft diameter: 10 x 20 mm Rotation direction: Alternating left/right MACHINE DETAILS Footprint: 5,000 x 7,750 x 3,000 mm EQUIPMENT 2x vacuum cups per console Note: Unless expressly stated otherwise, tools, tool holders, units, and mechanical clamping devices that may be visible in photos and videos are not included in the scope of delivery.

Condition: good (used), Year of construction: 1996, Vötsch VTR 7033/S Temperature test chamber Manufacturer: Vötsch Type: VTR 7033/S Item no.: 60885637 Gsdpfx Abjwbpzmjdjil Temperature chamber Temp. range: -70°C to +180°C Mains voltage:400V Rated current:24A Rated output: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of manufacture: 1996 TK 07 You will find further articles - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Gjdpfew E Hpvox Abdjil Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine