Used Voltage Stabilizers for sale (15,822)

Year of construction: 2015, operating hours: 1,000 h, condition: ready for operation (used), functionality: fully functional, Heinzinger PTNhp 32-20 – High-precision power supply – Year of manufacture 2015 Manufacturer: Heinzinger Type: PTNhp 32-20 Year of manufacture: 2015 Condition: Used Dcjdpfj Ah Hxyox Apmsp Technical data - Output voltage: 0–32 V DC - Output current: 0–20 A - Output power: max. 640 W - High-precision, linearly regulated power supply - Very low ripple and high long-term stability - Operation as a constant voltage source (CV) and constant current source (CC) - Suitable for resistive, inductive, and capacitive loads - Weight 27 kg For sale is a high-quality precision power supply from the renowned German manufacturer Heinzinger, model PTNhp 32-20, manufactured in 2015. This unit belongs to the high-performance PTNhp series and is characterized by extremely precise and stable output regulation as well as very low ripple. It is ideally suited for demanding industrial applications, test benches, development departments, research and laboratory applications, and as a precise power supply for electronic and inductive loads. The PTNhp series stands for the highest degree of control accuracy, reliability, and a long service life. Scope of delivery - Heinzinger PTNhp 32-20 - Power cable - Additional documentation and accessories by arrangement Inspection and functional testing possible by appointment. Sale from our location. Shipping possible by arrangement. If you have any questions or are interested, we look forward to receiving your inquiry.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer Dcedpfxj Aggu Ao Apmjp CE marking

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2018 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 2 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F Dcjdpfx Apsx R Szuomjp - Voltage / Frequency: 400 V | 50 Hz - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets.

Year of construction: 2012, condition: used, This listing is for a Haier ULT Ultra Low Freezer. The unit is in full working condition and is ready for immediate release. Overview: Haier Biomedical offers a range of ultra-low temperature (ULT) freezers specifically designed for the secure and long-term storage of sensitive biological products. These include viruses, germs, erythrocytes, leucocytes, and cutis. The units are ideal for hospitals, research institutions, and laboratories. Key Features: Reliable Performance: Cabinet temperature can reach –86 ℃, with temperature uniformity within 6 ℃ (or 5 ℃ for model WD-86L728J). Energy Saving: Four independent inner doors and a four-layer sealing structure ensure excellent heat insulation, reducing energy consumption. Dcodexxx Hwjpfx Apmep Power consumption for model WD-86L728J is only 10.5 kWh/day. Highly efficient cooling fans and compressors combined with hydrocarbon refrigerants provide significant energy savings and long-term sample security. Low Noise Operation: Innovative refrigeration system design with quiet fans and compressors minimizes noise during operation. Secure Storage: Each unit features a lockable handle with a unique key specific to that unit. Additional padlock space enhances sample security. Drawer System: Multi-layer drawer system makes it easy to store and sort samples efficiently. Pressure Equalisation Port: Heated port prevents icing on the vent and allows users to reopen the main door soon after accessing the freezer. USB Interface: Enables users to download historical temperature data for compliance and auditing purposes. Alarm Functions: Multi-level audible and visual alarms include alerts for: High/low temperature Sensor error Power failure High ambient temperature Clean filter Door ajar Temperature Control: Temperature range from –86 ℃ to –40 ℃, adjustable in 1 ℃ increments, ensuring optimal storage conditions. Choice of Models: Models available with stainless steel interiors for added durability. Adjustable and Mobile Design: Adjustable feet at the front and castors at the back ensure stability and mobility. Additional Features: Energy Efficiency: Freezers utilize advanced insulation and hydrocarbon refrigerants for reduced energy consumption and environmental impact. TwinCool Technology (on select models): Two independent refrigeration systems provide continuous operation and sample protection even if one system fails. User-Friendly Interface: Equipped with large LED displays or touchscreen interfaces for real-time monitoring of cabinet temperature, set temperature, ambient temperature, and input voltage. Applications: Haier’s ULT freezers are suitable for storing a wide range of biological materials in healthcare, clinical, and research environments. Their reliability, security features, and energy efficiency make them a trusted choice for safeguarding valuable samples.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, power: 720 kW (978.93 HP), color: black, output voltage: 400 V, continuous power (apparent): 800 kVA, output frequency: 50 Hz, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model: MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Dcodpfx Apewx H Hzsmsp Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Year of construction: 2020, operating hours: 918 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2298-2303, The automatic machine, model MR-4, manufactured by Sevenfluss, is an industrial machine designed for use in the bottling sector. It is automatic equipment intended to be integrated into industrial production lines, where it performs operations associated with the processing and packaging of products intended for bottling. The machine is identified by model MR-4 and serial numbers 2298-2299-2300-2301-2302-2303, with a year of manufacture of 2020. It features an industrial structure designed to ensure stability, robustness and reliability during operation, which are essential characteristics for continuous use in production environments. In terms of technical and energy specifications, the machine has a declared total weight of 2,000 kg and is electrically powered at a voltage of 400 V, a frequency of 50 Hz and an installed power of 10 kW. The electrical power supply enables the operation of the drive systems and the various devices making up the automatic machine. Dcjdpfx Aps Ahyh Tjmep The machine is intended to be integrated into industrial bottling processes, where automation helps improve production continuity, process repeatability and the overall efficiency of the production line. Its intended use therefore falls within the food industry and, more generally, within industrial packaging processes for liquid products. Construction Features and Safety The manufacturer declares that the machine has been designed and manufactured in compliance with the essential health and safety requirements laid down by the applicable European legislation, with particular reference to the following provisions: Directive 2006/42/EC, concerning machinery. Directive 2014/30/EU, concerning electromagnetic compatibility. Regulation (EC) No. 1935/2004, concerning materials and articles intended to come into contact with food. For the purpose of verifying conformity, the manufacturer declares that the following technical standards have been taken into consideration: UNI EN ISO 12100:2010 – Safety of machinery: General principles for design, risk assessment and risk reduction. EN 60204-1:2006 – Safety of machinery: Electrical equipment of machines. These regulatory and technical references respectively concern safety design principles, the identification and reduction of risks associated with the use of the machinery, and the requirements applicable to its electrical installation and equipment.

Condition: used, Weiss climate testing chamber with seat pulsator Djdpfx Apjxbgrgjmjcp Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Dcodo Afx Hhspfx Apmsp Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance from spindle nose to table: min. 200 mm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 Tool clamping force: 12,000 N Inner bearing diameter: 80 mm Spindle speed: max. 8,000 rpm Main spindle motor at 100% duty cycle: 29 kW Main spindle motor (intermittent): 38.5 kW Speed range with constant power from: 1,500 rpm Feed force X, Y and Z axes at 100% duty cycle: 13,000 N Feed force X, Y and Z axes (intermittent): 16,000 N Rapid traverse rate X, Y and Z axes: 30 m/min Working feed rate X, Y and Z axes: max. 10 m/min Milling performance in steel St 60: 650 cm³/min Drilling diameter in steel St 60: 60 mm Threading performance in steel St 60: M36 Tool places: 24 Tool length: max. 300 mm Tool weight: max. 10 kg Tool diameter with full magazine: max. 85 mm Tool diameter with free adjacent positions: max. 125 mm Tool change time: 3.5 s Tool change time chip-to-chip: 7 s MACHINE DETAILS Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump capacity: 0.75 kW EQUIPMENT Tool magazine with random tool management Coolant pump

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. Dcjdpfx Aexhfc Rjpmjp High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, ===== Technical Data + Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: HIDROBRASIL - Model: Single-Column Press - Machine Designation: Tablet Press - Design: C-Frame / Single-Column Press - Year of Construction: 2023 - Location: Gelsenkirchen, Germany - Pressing Force: max. 20 t Dcedpfstv Ewdjx Apmop - Machine Weight: approx. 2 t - Overall Height: approx. 2,400 mm ==== Working Area - Table Size: 500 × 400 mm - Plunger Size: 300 × 300 mm - Max. Opening Width: 500 mm - Stroke / min. Opening: 400 / 100 mm - Table Height above Ground: 800 mm ==== Speeds - Rapid Closing: 120 mm/s - Pressing Speed: 5–10 mm/s ==== Hydraulics & Drive - Operating Pressure: max. 250 bar - Pressure Accuracy: ±5 bar - Main Pump: Gear Pump, approx. 10 l/min - Oil Volume: approx. 150 l (HLP 46) - Main Motor: 22 kW - Total Connected Load: approx. 6 kW ==== Accuracy & Stability - Parallel Deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control Voltage: 24 V DC - Light Curtains: SICK / PILZ / SCHMERSAL - Two-Hand Operation, optional Foot Operation - Safety design according to EU standards and UVV ==== Equipment - Tabletop as a tray with a 50 mm rim and drain - Position setting via sensors - Pressure setting: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Function - Multi-Tool: 8 pressing plungers - Output: approx. 8–12 parts per minute - Hydraulic unit can be completely disassembled for maintenance =====

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Djdpfoim Ik Sjx Apmjcp Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, EYAN Universal Tool Grinding Machine – Used, including extensive accessories & documentation For sale is a high-quality universal tool grinding machine from the EYAN brand, in good used condition. The machine is ideally suited for the precise re-grinding and production of various cutting tools and is perfect for professional toolmaking as well as for locksmiths, maintenance companies, and training workshops. Thanks to its robust cast iron construction, the machine impresses with its smooth operation, stability, and precise grinding results. Equipment EYAN Universal Tool Grinding Machine Precision chuck / tool holder Extensive adjustment and setting options Machine lamp Grinding wheel mounted Original under-cabinet with storage space Original operating manual Technical documentation Spare parts lists and documents Additional accessories and tools in the under-cabinet (see pictures) 400 V high-voltage connection Condition The machine is in good, used condition with the usual signs of wear and tear. It comes from an operating business and was in use until recently. Scope of delivery Dcsdpfszhx D Isx Apmjp EYAN Universal Tool Grinding Machine Under-cabinet Chuck Grinding wheel Original operating manual Technical documentation Spare parts documents Accessories and tools as shown in the photos Application areas Tool and mold making Metalworking Locksmith shops CNC manufacturing Training companies Maintenance and repair Tool grinding machine, universal tool grinding machine, tool grinder, milling cutter grinding machine, drill bit grinding machine, milling cutter grinding, twist drill grinding, turning tool grinding, tool sharpening machine, precision grinding machine, toolmaking, metalworking, grinding machine, EYAN, universal grinder, tool grinder, cutter grinder, tool grinding, tool sharpening, 400V, industrial, workshop machine, mechanical engineering, grinding technology. An inspection and functional test are possible at any time by prior arrangement. Net price, plus 19% VAT.

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. Dcjdeu Nzwuepfx Apmsp *

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Dcsdezdy Iaspfx Apmep Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, This listing is for the Carbolite PF30 Oven The unit is in full working condition and is ready for immediate use Summary The Carbolite PF30 is a versatile, reliable 28 L benchtop oven, offering: Fast and even heating up to 300 °C Excellent stability and temperature control Djdpfsxhfnyox Apmjcp A durable design with flexible configuration options Safety and efficiency suitable for a range of laboratory and industrial uses Standard Features Fan‑convection design ensures faster warming, uniform temperature distribution, and quicker recovery than natural convection models. R38 digital PID controller offers precise, stable control for models PF30 through PF200. Chemically resistant stainless steel liner for durability. Lever-latch door with an airtight silicone seal, minimizing heat loss and improving efficiency. Meets safety standard BS EN 61010‑2‑010:2003 for lab equipment safety compliance. Customizable Options (Specify When Ordering) Over‑temperature protection, ideal for protecting samples during lengthy unattended runs. Advanced digital controllers: Programmable or segment-style controllers with RS‑232/485 or Ethernet connectivity. Thermocouple ports, cable entry, lockable doors, stacking frames, door‑isolating switches, viewing windows, interior lighting, air exhaust fans, moisture extraction, etc. Stoving & curing option, designed for solvent removal—includes exhaust fan and safety vent panel (not compatible with viewing window). Low-voltage variants, floor stands (fixed or castor-mounted), routine spares kits, reinforced shelves, and more.

Condition: used, Werth Werth Messtechnik Scope-Check 650×750×500/MB/Z – 3D CNC Coordinate Measuring Machine For sale is a high-quality 3D CNC coordinate measuring machine from the renowned company Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This machine is impressive due to its precision, reliability, and versatility in industrial metrology. Features & Properties: CNC-controlled 3D coordinate measuring machine Multi-sensor capable (optical and tactile measurements possible) Version with Moving-Bridge system (MB/Z) for high stability and flexibility High precision in measuring complex workpieces Robust design, intended for continuous industrial use Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The highly precise, tactile Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe tip changes and precise measurements with long probes. Key features: Strain gauge technology: Minimal deflections are registered with high accuracy – typical errors such as "lobing" are eliminated. High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm. Fast changeover: Automatic probe tip changeover with SCR200 changeover magazine, no recalibration required. Robust: Service life of the probe tip modules over 10 million probing operations. Flexibility: Standard (SF) and low-force modules (LF) for sensitive materials. Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm. Technical specifications (excerpt): Connection: M8 connector, Interface PI200 Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) Probing force XY: 0.02 N, Z: 0.07 N Overload force XY: up to 0.4 N, Z: up to 4.9 N Weight (sensor + module): 22 g Dcsdpfxszii Dze Apmjp Probe tips: M2 Technical data: Manufacturer: Werth Messtechnik Model: Scope-Check 650×750×500/MB/Z Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm Supply voltage: 115–230 V AC Power consumption: max. 10 A Weight: 1360 kg Scope of delivery: Werth Scope-Check 650×750×500/MB/Z Renishaw TP200 probe system incl. probe tip modules Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Dcjdpfoyt Hu Tox Apmep Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used . More photos and full specifications: /

Condition: used, Year of construction: 2008, functionality: fully functional, O.M.A.R. FANTASY PLUS – PHARMACEUTICAL BLISTER MACHINE Dcsdszxc Apspfx Apmjp For sale: O.M.A.R. / Dott. Bonapace FANTASY PLUS semi-automatic blister machine, used in pharmaceutical production, supplied with extensive original format tooling and comprehensive technical documentation. TECHNICAL DATA Manufacturer: Dott. Bonapace & C. / O.M.A.R., Italy Model: FANTASY PLUS Year: 2007 Voltage: 220/230 V Operating pressure: 9 bar Weight: approx. 125 kg CE compliant APPLICATION Suitable for pharmaceutical R&D, laboratories, clinical batches, stability studies, samples, and small production batches. According to the original documentation, the machine is designed for: - PVC/ALU Oblong - PVC/ALU Round - ALU/ALU Oblong - ALU/ALU Round EXTENSIVE TOOLING A major advantage is the exceptionally large quantity of format tooling included. The package contains numerous forming, sealing, and die-cutting components for different blister configurations, including: - Forming molds and plates - Heated forming/blowing plates - Sealing plates and molds - Cutting dies and counter plates - Centering components - Various format inserts - Coding/embossing accessories - Additional format-specific components Different round, oblong/oval, and rectangular cavity configurations are available. All tooling shown in the photos is included. Due to the large quantity of tooling, the exact allocation of every individual component to a complete format set cannot be guaranteed. DOCUMENTATION Comprehensive original documentation in German is included, covering CE documentation, technical data, operation, forming, sealing, die cutting, ALU/ALU processing, maintenance, spare parts, and tooling codification. Original drawings for individual blister formats are also available. CONDITION Very well-maintained used condition from pharmaceutical use. Inspection and demonstration by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. PRICE: EUR 32,500 net, negotiable CYCRON GmbH Switzerland Subject to prior sale and errors.

Condition: used, Laboratory foam dispensing station with foam mixer and applicator The system functions similarly to the SUPRA MIX concept. Several chemicals are dispensed and mixed with water and air in a controlled ratio. Formulations are stored in the control unit and can be adjusted during operation. Foam applicator with mixer • Dynamic foam mixer with online dispensing of 5 products + water • 5 dosing pumps • Direct inlet for the mixture Dedeu D E A Dspfx Apmscp • Product monitoring of the chemicals • Air dispensing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For single-piece carpets up to 1 m wide Application areas Stain protection agents Dirt, water and oil repellent agents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and insect repellents Pile stabilizers Agents against hair loss Resins for wrinkle prevention and dimensional stability Specification Foam density: 20–100 g/l (higher density at lower flow rate) Dosing range: 0.5–500 g/l (1:100 per pump) Foam output: 50–500 l/min Electrical data Connected load: 6 kVA, 10 A Mains voltage: 400 V / 50 Hz Control voltage: 24 V Dimensions: H × W × D = 1400 × 2100 × 860 mm Year of manufacture: 2007 Purchase price: €47,600 You can find more items – new and used – in our shop! International shipping costs available on request!

Condition: used, This listing is for a Beckman Coulter DU 800 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Beckman Coulter DU 800 UV-Vis Spectrophotometer is a versatile and high-performance instrument designed to meet the needs of a variety of scientific applications, including complex analyses as well as routine measurements. Its capability to operate across a broad wavelength range makes it a valuable asset in fields such as life sciences, biotechnology, academia, and pharmaceuticals. Key Features: Wide Wavelength Range: The DU 800 operates efficiently between 190 to 1100 nm, accommodating a broad spectrum of applications in UV-Vis spectroscopy. Narrow Bandwidth: With a bandwidth of ≤ 1.8 nm, it offers high-resolution measurements, crucial for accurate qualitative and quantitative analyses. Focused Micro-Beam Design: This innovative design results in a wide linear range and improved performance, particularly beneficial when working with small volume samples or precious materials. Enhanced User Experience: The integrated interface improves usability, allowing for immediate access to system functions and continuous display of status and method parameters, ensuring users can monitor their assays effectively. Efficiency Boosting Schedulers: The inclusion of a source scheduler automatically switches between UV and visible lamps at designated times, enhancing the efficiency of the instrument during long-term operations. Technical Specifications: Dimensions: 69 cm (27 inches) width x 53 cm (21 inches) height x 26 cm (10 inches) depth, making it a compact solution for lab environments. Weight: Weighs 37 kg (81 pounds), providing a solid and robust build suitable for laboratory use. Line Voltage: Compatible with a range of 110 – 240V +10%, allowing for global use without the need for voltage converters. Frequency: Operates at standard frequencies of 50/60 Hz. Power Consumption: Typical power usage is 200 watts, making it relatively energy efficient. Operating Temperature Range: Can function optimally in a temperature range of +15 to 40°C (59 to 104°F). Humidity Requirements: Maximum relative humidity of < 85%, not to exceed 32.5°C WBT, ensuring device longevity and performance stability. Benefits: Versatile Applications: The DU 800 is capable of handling a diverse range of applications, from routine quality control to research and development tasks in laboratories. Dodpoxxz R Sofx Apmecp Precision and Reliability: Its advanced optics and design ensure precise and reliable measurements, making it ideal for quantitative analyses in various scientific disciplines. User-Friendly Design: The intuitive user interface contributes to ease of operation, reducing the learning curve for new users, while providing seasoned researchers with efficient access to controls. Cost-Effective: Designed for longevity and reliability, the DU 800 is an investment that can enhance laboratory productivity without exorbitant running costs.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total width: 630 mm, total length: 630 mm, total height: 357 mm, overall weight: 265 kg, type of input current: DC, input voltage: 200 V, control voltage: 200 V, funnel diameter: 1,000 mm, screw diameter: 630 mm, The NTB-61 or NTB-46 base is a vibratory drive model designed for feeding medium and large-sized parts. It features an increased vibration amplitude and provides easy integration for controlling feeding parameters. It is a suitable choice for orienting and sorting large and heavy parts. Smooth and precise control of speed and product layer stability when used with a frequency controller. Particularly suitable for sorting and feeding large components. The simplified design ensures convenient adjustment and maintenance. Construction using high-quality materials and comprehensive testing ensures a high level of safety and operational stability. The standard design is right-hand rotation; left-hand rotation is available upon special request. Weight (kg): 265 Input voltage (V): 0-200 Current (A): 6 Vibration frequency (Hz): 60-200 Maximum bowl diameter (mm): 1000 Maximum load weight (kg): 65 Compatible controller: SDVC 31-XL NTB-46 Specification PRICE 2000 Euro Weight (kg): 124 Input voltage (V): 0-200 Current (A): 3 Dcodpfx Ao Ah Tr Hspmsp Vibration frequency (Hz): 80-220 Maximum bowl diameter (mm): 760 Maximum load weight (kg): 40 Compatible controller: SDVC 31-L

Condition: new, Year of construction: 2026, Holzkraft SCM Format Panel Saw minimax si 4 - 315 / 32 with Scoring Unit Exhibition machine sold at a special price With pivoting saw blade and format sliding table made of anodized aluminum Article number: 5504832VR Solid work table made of heavy-duty, ribbed gray cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precise format sliding table made of anodized aluminum – easily movable with high-quality ball bearing system Hard metal guide rails – for long-lasting precision and minimal maintenance Pivoting gray cast iron saw unit with double segment guide – exact zero-point pivoting for maximum cutting accuracy Solid parallel fence with round bar guide Equipped with adjustable eccentric clamping device Integrated miter fence on the sliding table – for quick and precise miter cuts Scoring unit with belt drive TECHNICAL DATA Dimensions and weights Weight (net) approx. 640 kg Connection for dust extraction Dust extraction port diameter 120 mm Dust extraction port diameter saw blade guard 60 mm Installation information Transport width 980 mm Machine body length 1900 mm Machine body width/depth 840 mm Space requirement length 7235 mm Space requirement width/depth 4410 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Output power (motor power) 5.0 kW Rated duty cycle drive motor S6 Duty cycle drive motor 40% Sliding table and table Format sliding table length 3200 mm Format sliding table width 360 mm Format sliding table height 175 mm Table length 940 mm Table width 560 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3200 mm Rip fence length 3200 mm Saw blade tilt 90 - 46° Max. cutting height 90° 100 mm Max. cutting height 45° 71 mm Explanation of max. cutting height: Independent of the scoring unit Diameter of saw blade 315 mm Dcsdpfxj Afat Ao Apmsp Explanation of diameter of saw blade: Independent of the scoring unit Saw blade speed 4000 min⁻¹ Scoring unit Diameter of scoring saw blade 120 mm Scoring saw blade speed 9000 min⁻¹ EQUIPMENT Equipment Scoring unit: Driven by the main saw blade motor via flat belt, with saw blade Ø 120 mm Anodized aluminum format sliding table ✔ Handle for sliding table ✔ Material roller on the rip fence frame ✔ Saw parallel fence with round bar guide Fences: Two professional folding fences Rip fence shoe ✔ Eccentric clamp ✔ Table extension ✔ Table lengthening ✔ Saw blade guard ✔ Location: in stock, 54634 Bitburg - immediately available -

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Dcsdpfsiryyasx Apmjp Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. Dodpfx Apszw T Sxsmjcp The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: used, This listing is for the Grant SAP 2S SUB Aqua Bath The unit is in full working condition and is ready for immediate use The Grant SUB Aqua Pro 2S is a compact, high-performance digital water bath ideal for laboratory applications requiring precise temperature control. Designed to meet the rigorous demands of research, education, and quality control, this model offers a value-for-money solution without compromising on quality or functionality. Key Specifications Dodpfx Apoxv Dbbjmjcp Tank Capacity: 2 litres (shallow format) Working Area (L x W): 139 x 289 mm Overall Dimensions (L x W x H): 215 x 335 x 150 mm Temperature Range: Ambient +5ºC to 99ºC Stability (DIN 12876-3 @ 70ºC): ±0.2ºC Resolution: 0.1°C Control: Digital, with programmable presets Weight: ~3 kg Voltage Options: 120V or 230V Included: Lid and base tray Safety Features: Dry start/run dry protection Over-temperature alarm High-temperature safety cut-out