Used Walter Woodtronic for sale (64)

Condition: good (used), Approx. 60 tool holders of this size. Nljdpfx Ajyzdunjhzjb €40/each Sale only within EU member states! No private sales. Any warranty rights are excluded. We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Approx. 80 tool holders of this size. €30 each Sale only within EU member states! Nljdeyzdn Uspfx Ahzob No private sale Any warranty rights are excluded. We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with any safety and environmental protection requirements specified in accident prevention regulations.

Condition: refurbished (used), End mill, flute cutters, Corner milling cutter Make Walter type prototype P 31 23017-20 shank diameter 20 mm cutting diameter approx.19 mm Nledpfxsiuh E Is Ahzob cutting length 38 mm freshly ground and coated Material HSS Co

Condition: new, Year of construction: 2023, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Nlodpfsy Sw T Ssx Ahzob

Condition: excellent (used), Year of construction: 1974, max. grinding diameter 265 mm grinding length 500 mm Nodpfx Ajytg U Hshzjlb

Condition: excellent (used), 16 end mills with indexable inserts Make Walter Weight 9.5 kg Nledpfx Asdx D Tvshzob

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition Nlsdpfxsyhq A Ds Ahzob

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm Nsdpjb E S I Tsfx Ahzslb -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm -Weight: 19 kg

Condition: used, machine/vehicle number: 2032, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for tool grinder -Take: SK40 -Tip height: 100 mm -swiveling -Dimensions: 640/260/H290 mm -Weight: 48 kg Nodpfxoc Nw Svs Ahzslb

Condition: good (used), Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Nsdpfowbn Ewox Ahzelb -Manufacturer: Walter, face milling cutter head -Type: WA ER 06 Ø315 mm -Hole: Ø 60 mm -Dimensions: Ø 335 x 110 mm -Weight: 33.7 kg

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm Nlsdowwg Rwopfx Ahzeb -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

Condition: used, Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm -Center bore: Ø 31 mm -Groove width: 14 mm Njdpfxjlb Iwie Ahzslb -Dimensions: 700/510/H260 mm -Weight: 294 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Walter & Sohn, frequency converter from the BRANDT KM 35 edge banding machine -Type: 501921522 / FU5 / 6 / 132LJD / 60 -Input: 380 V 50 Hz Nedogy T Nuopfx Ahzelb -Output: 220 V 200 Hz -Power: 5 KVA -Protection class: IP54 -Dimensions: 510/325 / H260 mm -Weight: 63 kg

Condition: used, Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 Nlodpfx Asgkw I Iehzob -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Recording: MK5 Njdpfed Ar U Ejx Ahzslb -Tip height: 145 mm -Part head: swiveling -Dimensions: 250/230/H300 mm -Weight: 23 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG Njdpfxjhikzlj Ahzelb -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WALTER TYPE: TANIH320EVO Nsdpsyllx Iefx Ahzjlb Year of manufacture: 2014 Faceplate diameter: 500 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC tool grinding machine Walter Helitronic Power 400 - Year of manufacture: 2019 - Fanuc control with Toolstudio - 4-position wheel changer Nodeylx Ipopfx Ahzolb - Eco Loader Accessories: - Grinding wheel arbors

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Nlodpfjyt N Dqex Ahzjb

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Njdpfxoyz Dwcj Ahzolb Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter Nlsdpfx Ahsb A Rk Iozsb -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

Condition: good (used), End mill, end mill, milling cutter, indexable inserts -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg Nledpjb A R E Uefx Ahzob

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm Njdsb A Rcfspfx Ahzelb -Weight: 0.75 kg

Year of construction: 1983, condition: excellent (used), *complete with a RÖHM 4-jaw chuck diam. 200 mm Njdpfx Ajmrnkzehzslb Center hight: 160 mm

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm Njdpemv Ekyjfx Ahzjlb dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg