Tool and Cutter Grinder

Walter UWS20

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg. Hjdstpp H Nepfx Adzen

Year of construction: 1992, condition: ready for operation (used), Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025. Hjdpfxou D H Hwo Adzjn

Condition: excellent (used), 1 lot SK 50 shots (28556) approx. 65 pieces approx.250 kg without pallet Hedpfeuir Unsx Adzen

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Hodpowuqbbjfx Adzsn Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: used, TECHNICAL DETAILS - Active digital viewer, number of axis : 2 - Axis : X/Z - Tool holder orientation : 360 [°] - Machine's weight : 90 [Kg] - Overall dimensions machine : 800 x 650 x 1000 [mm] - Projector : 20 [x] - Tool holder : ISO 70 - Power supply : 230 [V] - Pneumatic : 4 - 6 [bar] - Frequency : 50 / 60 [Hz] - Tolerance : -10 - +6 [%] Hodpfx Aeuhb Sgjdzjn

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t Hjdpfx Adoyi Hwtjzjn

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart. Hjdpfx Adjw Nq Amezjn

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Technical Data Drilling system: ELB system Number of drilling spindles: 2 Min. drilling diameter: 1 mm Hodpfxox E U S Eo Adzsn Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Nominal workpiece diameter range: 5–30 mm

Year of construction: 1998, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 9,500 kg, total height: 2,760 mm, spindle motor power: 29,000 W, product length (max.): 6,600 mm, spindle speed (max.): 4,000 rpm, table load: 4,000 kg, number of axes: 3, This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine. • Table dimensions: 2,500 × 700 mm • T-slots: 5 • T-slot width: 22 mm • Head type: Universal manual U22 (dual orientation) Hjdex D D Nzspfx Adzen • Indexing: Manual in 2 planes • Tool clamping: Hydraulic • Feed rates: • Working feed (X/Y/Z): 5 – 5,000 mm/min • Rapid traverse (X/Y/Z): 12,000 mm/min Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 1991, measuring range X-axis 300 mm measuring range Y-axis 300 mm Table dimensions 800 x 800 mm taper ISO 30 voltage 220 V / 50 Hz Hsdpfx Adotv Icnezjn total connected load 0,3 kW weight 0,5 t dimensions of the machine ca. 1,5 x 1 x 1,6 m • Tool presetter with taper SK 30, SK 40 is also optionally possible, • Display of measured value ZOLLER DA 6050 / 0266, serial no: H320/066