Used Carpentry machines for sale (60)

Condition: good (used), Year of construction: 2022, Functionality: fully functional, Assembly line for timber frame construction - framing machine X-Frame - clamping table X-Clamp - automatic working bridge X-Multi - tilting table X-Tilt Colitswdw Umj Tb Asgt - clamping table X-Clamp - clamping table X-Clamp - bridge X-Multi

Condition: refurbished (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: AE00002748, 12kN SEMI-AUTOMATIC CAM PRESS Brand: SCM Model: Action E Serial No.: AE00002748 Year: 2021 MAIN ADVANTAGES: - Better pressing quality, uniform across the entire surface to be machined (comb structure) - Parallelism and orthogonality thanks to the use of screws of the appropriate size. - Efficient operation with knobs FEATURES: - Machine frame: extra-rigid welded monoblock chassis Movable side work surface (X direction) Cjlit Tbowf I Iaj Aogt Movable upper work surface (Y direction) Movement of each support is transmitted via a geared motor. This drives two trapezoidal screws of the appropriate size and equipped with a double chain sprocket (5/8"), a system that achieves the best possible parallelism for the movable supports. - Worktop height from floor: 60 cm - Maximum usable dimensions: 2400 x 1100 (H) x 700 mm - Minimum usable dimensions: 250 x 270 (H) x 250 mm - Maximum horizontal pressure: 1000 kg Positioning speed: 50 mm/sec - Maximum vertical pressure: 1500 kg Positioning speed: 45 mm/sec - Movement achieved by high-precision systems using AC motors. - Power supply: 400 V. Three-phase 50 Hz IN 6 A Installed power: 4 kW - CE marked - Lockable disconnect switch, mushroom stop Dimensions in operating order: x x h. mm Space required around the machine for movement and work: m Transport dimensions (LxWxH): x x h.m Weight: Kg Machine supplied with its manual, spare parts list, and diagrams. Machine serviced, brought into compliance, with quality control and dynamic functional testing. With a 3-month warranty and certificate of compliance. Available from stock, subject to prior sale.

Condition: new, Year of construction: 2024, Functionality: fully functional, 7.5 HP 200 mm cutting height 1Hydraulic feed brake Tiltable to the left up to 60°, to the right up to 30°, tiltable from the front using a hand crank cutting height 140 mm at 45° inclination Tiltable to the left up to 60° to the right up to 45 Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the unloading roller conveyor with scale and stop slide left - 6000 mm Cgelit Tbjb Dkyvs Ajt Length of infeed roller conveyor 2000 mm, attachment side right Machine completely mobile, total length 9000 m inclinable from the front with hand crank, machine is also available with 215 mm or 240 mm cutting height and other options,

Condition: excellent (used), Net price: €3,350 Makita 5500s tenon cutter in near-new condition. Celit Tewf I Aqob Aegt You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price excludes VAT, ex-works Haldensleben.

Condition: good (used), Used SLS28 Top Schneider universal circular saw -Cutting height approx. 280mm -Rotary table rotatable from 0-135 degrees -Automatic cross-cutting via a two-hand control -Motor power 11kW -Handwheel swivel from 90-30 degrees (60 degrees) readable on a scale -Saw blade diameter 750mm Cgolit Tswdnzweb Ast -New saw blade including chip remover -Cutting width adjustment of the machine from 0-650mm -Pneumatically lockable -Laser cutting indicator - NEW laser -Clamping cylinder on the right -Clamping cylinder on the left -Automatic heavy-duty feed on the right -Roller conveyor on the right 3000mm including aluminum stop -Roller conveyor on the left 3000mm including aluminum stop ruler -One folding stop

Condition: used, Technical specifications: Cutting depth: 260 mm Cutting depth at 45°: 184 mm Cutting depth at 60°: 130 mm Pivoting to both sides: -60° – +60° Nominal idle speed: 3000-3600 rpm Nominal power consumption: 3000 W Cjliewgk Acot Tb Asgt Weight: 13.3 kg Universal motor: 230 V / 50 Hz

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Coloud At Rjit Tb Asgt

Condition: good (used), Code: 0054 Brand: SCHNEIDER - GERMANY Model: SLS - 28 Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, glulam beams and various applications Blade diameter mm 750 Blade inclination 90 - 30 degrees Manual table rotation 0 - 150 degrees Cutting height at 90 degrees mm 280 Cutting width mm 840 Motor power Kw 11 N° 2 pneumatic cylinders for workpiece clamping Feed speed adjustment Machine cover with manual opening Table size 1560 x 1560 mm Table height mm 940 Bimanual control N° 1 suction port mm 150 Celisv Hayfot Tb Aegt N° 1 suction port mm 100 Compressed air 7 Atm Infeed Roller conveyors with 4 rollers length mm 2000 Outfeed Roller conveyors with 4 rollers length mm 2000 Machine overall dimensions for transport mm 2800 x 2500 x 1800 h Weight kg 980

Condition: new, Year of construction: 2024, Functionality: fully functional, 11 kw = 15 hp cutting height 200 mm saw blade diameter 550 mm with broach cutting edges cutting width to rip fence 1500 mm sliding carriage length 3200 mm sliding carriage mounted on hardened steel rollers (similar to Altendorf) the large crosscut fence can be swivelled 45 ° to the left and to the right; Cgoliscyd Ncst Tb Ast electric height adjustment electric tilt adjustment digital display for the inclination machine weight 1250 kg

Condition: excellent (used), Functionality: fully functional, Mobile with support roller stand, additional bracket Cjleu Dnx Ieit Tb Ajgt Price from location

Condition: good (used), Year of construction: 1989, Krüsi Tenoning Machine Cjljwdnv Isit Tb Aegt Type ZA-66 Cutting Height 270 mm Pivoting

Condition: excellent (used), Year of construction: 2009, BIESSE ROVER C9.65 FT Conf 2 MACHINING CENTER XP6OO control system entirely PC-based - Division into 2 shaping areas and 8 X-blocking zones Colit Tjtt Sqdjb Aegt 2 300m3/h vacuum pumps - Configuration 1 X=6450mm Y= 1860mm C2-A1 composition 12kw electro-spindle, Iso30 air-cooled socket -360° pivoting operator device - C axis 10-position revolver tool magazine on Z carriage Predisposition for mechanical copier - 5 ISO30 tool holders with spring clamps Automatic lubrication system - Diagnostic video - Oil bath sawing unit for 215mm blade Extra charge for extension of reticular work surface to 2100mm in Y direction

Condition: new, Year of construction: 2025, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Csliefg Tatet Tb Asgt Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: good (used), Code: 0056 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cgelov Hnxijit Tb Ast Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Electronic programmer Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: new, Year of construction: 2025, Functionality: fully functional, 5 KW 7.5 HP Cutting height 200 mm Tiltable up to 60° to the left, up to 30° to the right using a hand crank from the front Cutting height at 45° tilted 140 mm Cutting width 420 mm Cutting width swiveled at 45° 290 mm Tiltable up to 60° to the left, up to 45° to the right Cjlitedxw U Is Tb Aegt Incl. saw blade for wood 6,000 mm heavy cross-cutting roller conveyor, attachment side on the left, stop slide can be adjusted from the machine using a handwheel, pneumatically lockable, length can be read digitally, digital display in 230 volt version 4,000 mm heavy feed roller conveyor, attachment side on the right Machine can be tilted on both sides from the front using a hand crank and worm gear, hydraulic feed brake (option) Various options available on request, e.g. larger cutting height and material tension and laser cutting display

Condition: new, Year of construction: 2015, Carpentry plane Cslsr D Tvpeit Tb Aegt new device Year of construction 2015 from dissolution The innovative chip ejector with excellent chip removal thanks to increased air flow and innovative air guidance banishes blockages caused by wet wood shavings to the past! The solid cast construction weighs only 13.2 or 12.5 kg thanks to its consistent lightweight design. The powerful MAFELL alternating current motor offers sufficient reserves. Planing becomes an experience! As with most MAFELL machines, the intelligent control electronics keep watch in the background. For soft start and constant speed under load, as well as for a machine-friendly speed reduction when idling and for overload protection. Scope of delivery 1 reversible blade, 1 pair of carbide steel; order no. No. 091696 1 open-end wrench 8 mm; order no. No. 093258 1 connecting cable 4 m; order no. No. 087323 Planing width 248 mm chip removal 4 mm in cardboard box Technical data chip removal0 - 4 mm Planing shaft Ø74 mm Nominal idle speed8500 1/min Rated power consumption2300 W Universal motor230 V / 50 Hz Planing width Weight18.3 kg Availability: short term Storage location: Hochheim

Condition: excellent (used), Functionality: fully functional, nominal power: 7.5 kW (10.20 HP), saw blade diameter: 750 mm, Schneider KS500 under-table miter saw Saw unit pivots 90°-30° Motor power 7.5 kW Saw blade 750 mm Cslijwa Ilzot Tb Ajgt Max. cutting height approx. 270 mm

Condition: good (used), Year of construction: 1984, Crosscut circular saw Cutting height 240 mm Pivoting adjustment via handwheel and threaded spindle up to 45° Saw blade 700 mm Motor strengths 4.8 kW 1500 min. or 5.5 kW 1500 min Pivoting from the front, whereby the free overhang behind the saw blade is retained Circular cut-off saw: Cutting depth from top and bottom 125 mm each with saw blade 350 mm (motors 3 kW 3000 min each) each unit can be pivoted 30° to either side Motor boost from 3 kW 3000 min to 5.5 kW 2900 mi or 7.5 kW 2900 min Possibility of attaching flattening heads, profile milling cutters and planing heads with pre-cutting Adjustment options: Colit Tbov Av N Ue Asgt Pivoting adjustment for crosscut saw centrally from the front via degree scale readable Handwheel height and side adjustment centrally from the front for single-cut and offset circular saws, directly readable via measuring scales Additional adjustment of the offset unit - in the tenon length (by moving the units in the longitudinal direction, directly readable via scale) - in the tenon thickness (by spacer rings on the single-cut saw and by spindle height adjustment on the top and bottom of the offset circular saws) - swiveling of the 3 KW units by hand via degree scale - swiveling of the 5.5 kW and 7.5 kW units via degree scale using spindles

Condition: used, SINGLE PARVEAU TENONING MACHINE WITH DIGITAL POSITIONING TYPE 920 WITH 4HP SAW MOTOR 10HP ROUTER WITH 300MM SHAFT Cgjliov Txrgjt Tb Aot 10HP ROUTER WITH 300MM SHAFT

Condition: new, Year of construction: 2025, crosscut and mitre circular saw with maximum cutting height of 170 mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal readjustable fixed stops lower saw blade protection connectable to suction unit Modell-----Motor-----Drehzahl-----Schnittlaenge ZS 170: 400 V / 2,0 KW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Horizontal mitre range ZS 170 ----- 170 mm----- 45 degrees -90 degrees Modell----- Saegeblatt-----Absaugstutzen-----Gewicht ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories on request: Roller conveyor / length gantries type RO, RL, RLK, RLH and RLHK for machining aluminium and PVC profiles and for wood profile board machining. the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with min. 2 support feet 3 m type RLK: roller conveyor length stop with backwards folding stop slide Cgolit Tbscnz N Hj Aot - machine stand - Main switch lockable - Feed roller conveyor Ro-St60 3 meter right side - roller conveyor RLK-ST60 L 3,0 meter measuring length Length stop/roller conveyor heavy version mm - scale at the rear beam, caliper gauge with magnifying glass and stop flap - Saw blade 420 x 3,5 x 40 Z 84 Neg Location: ex stock 54634 Bitburg - free on truck - - immediately available- Location: Ex stock 54634 Bitburg - free on truck - - immediately available-

Condition: new, Year of construction: 2025, Functionality: fully functional, 5 kW, 7.5 HP, mobile on sturdy swivel casters Cutting height 200 mm, 1 hydraulic feed brake for aluminum processing Cgjljdxxadjit Tb Ast Cutting height at 45°: 140 mm Swivels to the left up to 60° Swivels to the right up to 45° Cutting length 420 mm at 90° position Cutting length at 45°: 300 mm Tilts to the left 60°, tilts to the right 30° using a hand crank from the rear (also from the front upon request) 1 saw blade 520 x 4.4 x 50 mm, 60 WZ neg. Left roller conveyor with scale and stop slide, length 2000 mm to the saw blade Machine length 4000 mm 1 roller conveyor extension with scale and 2nd stop slide Mounted on the left side, length 4000 mm. This extension roller conveyor also features an extendable measuring rod with a stop, allowing timber on the left side to be precisely cut to a length of 7500 mm. 1 feed roller conveyor, mounted on the right side, length up to the saw blade 2000 mm. Further options available upon request: Laser cutting indicator

Condition: ready for operation (used), Year of construction: 2007, For sale Randek line Machines are used manufactured in 2007 Celijwczlyet Tb Aogt

Condition: used, Used Description The innovative chip ejection system with excellent chip removal through increased airflow and innovative airflow banishes blockages caused by wet wood shavings! Only with the development of the 2700 W motor was it possible to achieve a planing width of 320 mm with a single-phase motor. Thanks to consistent lightweight construction, the solid cast iron structure weighs only 14 kg. As with most MAFELL machines, the intelligent control electronics work in the background. This ensures smooth start-up and constant speed under load, as well as a gentle speed reduction when idling and overload protection. The highly effective tool brake stops the cutterhead in seconds after switching off. A detail, but important for your safety, even after planing. Areas of Application Material use e.g. E.g.: Solid wood Planing work up to 320 mm Technical specifications: Planing width 320 mm Chip removal 0 - 3 mm Nominal idle speed 8500 rpm Cgelit Tbsv U Dlns Ajt Cutting speed 32.9 m/s Nominal power consumption 2700 W Weight 14 kg Planer block diameter 74 mm Universal motor 230 V / 50 Hz

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Cgelek H Ic Ueit Tb Ajt Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2025, Functionality: fully functional, Technical specifications: Cutting height 200 mm Cutting height at 45° tilt: 140 mm Pivoting to the left up to 67° Pivoting to the right up to 45° 5 kW 1 Hydraulic feed brake (optional) Cutting length 420 mm at 90° position Cutting length at 45° tilt: 295 mm Cgslit Tjn R A Ewob Ast Pivoting to the left up to 60°, tilting to the right up to 30° The tilt adjustment is done from the front using a hand crank. 1 saw blade for wood, diameter 520 mm 1 heavy-duty cutting roller conveyor, length 6,000 mm, left-hand side. The stop is adjusted from the front using a handwheel. The length can be read digitally to the millimeter. The stop is pneumatically locked. 1 x 230-volt digital display 1 x heavy-duty feed roller conveyor, right-hand side, length 4,000 mm Machine length 11,700 mm Completely mobile Machine packed on planks Images show a customer's machine.