Used Web Guiding System for sale (8,596)

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Fsdpfsm Sg Hcox Ab Uopr

Condition: used, bore capacity in steel (diameter) 23 mm throat 310 mm Fpodpfjvkixrex Ab Ujr bore stroke 150 mm turning speeds 90 - 2000 U/min 420 x 360 mm total power requirement kW / Volt weight of the machine ca. 650 Kg dimensions 1,2 x 0,8 x 2,4 mm Bench drill - Left/right rotation - Advance - Base frame

Condition: good (used), T-slot clamping plate for a radial drilling machine Dimensions L x W x H: 2500 x 1130 x 260 mm T-slot width: 20 mm Number of T-slots: 3 T-slots not continuous across the entire length Weight: approx. 2 t Fpedjv N Et Nepfx Ab Usr Siegfried Volz Machine Tools Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Tool changer: 30 positions Accessories: Fpjdpjxg Nmksfx Ab Usr - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm throat 330 mm bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m Fpodpsunt Rpefx Ab Ujr automatic feed.

Condition: good (used), Boorcapaciteit in staal (diameter) 30 mm Boorslag 170 mm Fastening MK 4 Sheet dimensions 750 x 550 mm Toerental 70 - 1750 omw/min Fedpfx Asvgb Eijb Uspr

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm engine: 380 V, 0,18 kW Fedsfnbgqspfx Ab Ujpr space needed: 470 x 250 x 520 mm weight: 39 kg

Condition: used, bore capacity in steel (diameter) 40 mm throat 360 mm Fpjdpfem Rlavjx Ab Uer bore stroke 135 mm taper MK 4 MK table-size 630 mm feeds ja mm/U turning speeds 120 - 1120 U/min total power requirement 2,4 KW weight of the machine ca. 0,9 t dimensions 1,2 x 0,8 x 2,75 m

Condition: good (used), functionality: fully functional, 4-speed transmission speed from 180 to 2000 rpm motor power 0,75kW drilling depth limiter Fpjdovcb Ntspfx Ab Ujr up/down adjustment

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Fodotpg D Ujpfx Ab Uepr Propeller Ø: 75mm Working hours: 76,200

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Fjdjw Up Rmopfx Ab Uopr Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm Fpsdpfx Aow Dbkrjb Uer -Weight: 11.1 kg/piece

Condition: good (used), functionality: fully functional, mount diameter: 80 mm, throat depth: 200 mm, spindle mount: MK 1, table width: 320 mm, table length: 250 mm, stroke length: 70 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine Fpedpfswzaqxjx Ab Uer -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Year of construction: 2005, condition: used, Applicable material: Food Fpsdpfxjvtzamj Ab Uer Power: 7 kW (10 HP) Empty weight: 900 kg Dimensions (LxBxH): 84 x 474 x 208 cm

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute Fpedsxtp I Ispfx Ab Uor 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Fsdetpg Dnspfx Ab Uspr Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm Fodpfx Ajv Tahiob Uopr -Weight: 8.7 kg

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance Fpjdpfxefp A I Es Ab Usr 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Year of construction: 2010, condition: used, Applicable material: Food Power: 5 kW (7 HP) Empty weight: 470 kg Fsdpfx Abovty S Ij Uepr Dimensions (LxBxH): 113 x 118 x 139 cm

Condition: good (used), functionality: fully functional, Working from production, has always run with an 800 mm extrusion head for producing HDPE pipes. Fpjdpfx Aswr Db Neb Ujr

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 Fodsd Tm Hnepfx Ab Uepr -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control Fpjdpfx Abjwaxuas Usr • Output on PVC around 700 kg/hour

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Fpedpfx Asvuzqzjb Uer Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Fpjdpfx Aevryhyjb Ujr Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 Fpodpfeq Tr Tbsx Ab Ujr - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D