Used Weber Cr 8 for sale (105)

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 Psdpowh Nu Tsfx Ac Hjgr 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Condition: used, High-pressure hydraulic power unit up to 630 bar, WEBER Type E45 / 59600.0 High-pressure unit + hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic power unit, Type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader – jaws, WEBER Type SP30 / 59 198.0 Outreach = arm length 340 mm Spreading distance max. 610 mm Spreading force in the working area max. 132 kN Closing force 99 kN - Double hose with plug-in connection Rated power 0.9 kW Mains connection 220 volts, 50 Hz Weight of hydraulic power unit approx. 40 kg Weight of spreader approx. 25 kg Very good condition Hydraulic fire and rescue set with hydraulic power unit and a spreader. Pjdpfxodzp S Ro Ac Hjgr The spreader is used to create rescue openings after traffic accidents by spreading apart. It can also be used to compress or lift loads. Versatile due to the multifunctional spreader jaws made of die-forged and hardened steel.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, spindle speed (max.): 5,500 rpm, number of slots in tool magazine: 240, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Pgedpfx Acezl S Uho Hjr Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Number of revolvers/magazines: 1 • Magazine capacity: 240 positions • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Rated voltage 3x 400 V • Frequency 50 1/s • Full load current 150 A • Rated current main drive 85 A • Connected load 80 kW 100 kVA • Operating voltage 400 V • Control voltage 24 DC • Frequency 50 Hz • Power 2.9 kW • Current 11.0 A • Refrigerant R134a • Filling quantity 3.0 kg Additional equipment • OPTIONAL: Tooling package (approx.): • Group 1: 700–750 tools (Ø up to 124.9 mm) • Group 2: 100–150 tools (Ø 125–224.9 mm) • Group 3: 50 tools (Ø 225–350 mm)Geometry readjusted (done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Pedpfjzrt Enox Ac Hegr Type: DS 63 Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Screw length: 17 x D Condition: used

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. Podpfozni Rxsx Ac Hsgr The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), 1 x Weber slicer 902 Bulk slicer. Will do 6 backs per minute at a thickness of 4-5mm. Slice thickness is infinitely variable and just set on the touch screen. Podpfx Acsyx D Rdj Hsgr

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Podjif Rvajpfx Ac Hogr

Condition: excellent (used), Weber MCS 902, CCA | Slicing Line – Slicer, Checkweigher, Discharge Conveyor Slicer Brand: Weber Model: MCS 902 Serial number: 1312 Pedpfx Acey Hl Hvj Hsgr Power supply: 400 V / 50 Hz Power: 10 kW Dimensions: 2900 mm x 1400 mm x 2380 mm Checkweigher: Belt type: Plastic mesh Belt width: 360 mm Dimensions: 610 mm x 400 mm x 1020 mm Discharge conveyor Brand: Weber Model: CCA Serial number: 1312 Power supply: 400 V / 50 Hz Power: 7 kW Belt type: Plastic mesh Belt width: 295 mm Dimensions: 5350 mm x 1800 mm x 1700 mm The Weber MCS 902 industrial slicing line is a high-performance system designed for precise slicing of cold cuts, cheese, and meat products. The MCS 902 Slicer features advanced slicing technology, ensuring consistent slice thickness and minimizing raw material waste. The integrated checkweigher provides real-time portion weight monitoring for complete process control. The system is complemented by the CCA discharge conveyor, equipped with a hygienic mesh belt for smooth transfer of sliced product to subsequent packaging or processing stages.

Condition: used, Weber Loading Conveyor Model CZB Pgedpfxjxtfz Re Ac Hor Stainless steel

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Pgodey Ickbopfx Ac Hsr Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm • One pair of original WEBER screws (in excellent condition, including measurement report) Pgedpfxjzu Nl Aj Ac Hor • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm control SIN 840 D spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm Pjdsymfzrepfx Ac Hogr table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, WEBEN / CEEVER Washing Tunnel with Robot, Conveyor, and Inspection System Manufacturer: WEBEN / CEEVER Application: Automated parts handling downstream of a press (press not included), washing, drying, and quality control Description: This system is an automated solution for retrieving and transferring parts from an upstream press. Robots pick up the parts and move them via a conveyor and transport system through an industrial washing tunnel (wet cleaning), followed by an inspection/measuring system for quality assessment. The complete process chain is designed for continuous operation, integrating robotic handling, washing process, conveyor technology, and automatic quality decision (OK/NOK). Technical Specifications – Washing Tunnel Year of manufacture: 2021 Cleaning process: spray-spray system (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1,400 mm Max. workpiece dimensions: depth 2,000 mm Max. workpiece dimensions: height 10 mm Max. workpiece weight: 12 kg System dimensions: width 3,000 mm System dimensions: depth 35,500 mm System dimensions: height 3,400 mm Weight (empty): 20,000 kg Weight (operational): 27,000 kg Material in contact with media: stainless steel AISI 304 Washing tank volume: 4,000 liters Washing tank heating: electric 80 kW Rinse tank volume: 2,500 liters Rinse tank heating: electric 40 kW Washing pump: 2,000 l/min, 6 bar, 30 kW Rinse pump: 900 l/min, 6 bar, 15 kW Washing filtration: 4 bag filters, 100 µm Drying: electric 48 kW Electrical connection: 380–400 V / 50 Hz / 3 Ph + N Total connected load washing tunnel: 385 kW Pedpfey Ein Uox Ac Hsgr Compressed air for automation: 6–8 bar, 1/4" connection Compressed air blow-off: 6–8 bar, 4 connections, approx. 30,000 Nm³/h consumption, 1 1/4" connection Technical Specifications – Robot, Conveyor, and Inspection System Control: Siemens PLC S7-1500 1517F Operator panel: Siemens TP1900 Comfort Robot: KUKA KR50 R2500 IONTEC with KRC4 (multiple robots in line) Conveyor technology: multiple conveyor lines / transport zones Max. conveying speed: up to 24 m/min Inspection system: laser measuring system with automatic OK/NOK evaluation and sorting Location: EU

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. Pjdoqpft Iopfx Ac Hsgr - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Pgjdpfx Aceyx H E Ds Hjr

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,713 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 50,000 W, number of slots in tool magazine: 144, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Pallet size: 800 x 800 mm Pgsdpfxezl S T Ds Ac Hor • Drive power: 50 kW • Maximum torque: 1650 Nm • Number of revolvers/magazines: 1 • Magazine capacity: 144 positions • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Operating hours: 27713 h Additional equipment • OPTIONAL: Tooling package • Group 1: approx. 700–750 tools (Ø up to 124.9 mm) • Group 2: approx. 100–150 tools (Ø 125–224.9 mm) • Group 3: approx. 50 tools (Ø 225–350 mm)Recent replacement of the X-spindle and the rotary seal on the IKZ (internal cooling through spindle)Geometry readjusted(done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm Pedpfxev Tahie Ac Hjgr -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: Pedox U A Iaepfx Ac Hogr The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting Pgsdpfsy T Ip Tox Ac Hsr - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES Pgodpfxjywr Tdo Ac Hsr SCREW NUMBER: 014.185605 r.920 S

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Pgodjx Twcpopfx Ac Hor

Condition: new, functionality: fully functional, power: 2.7 kW (3.67 HP), fuel type: gasoline, color: blue, operation weight: 62 kg, Year of construction: 2026, Equipment: UVV, Weber SRV 590-II Rammer – NEW | 700 blows/min | 62 kg operating weight | 280 mm shoe width | Honda GXR 120 petrol engine with 2.7 kW Item number: WEB170160 Technical Data: Manufacturer: Weber MT Model: SRV 590-II Condition: NEW Operating weight: 62 kg Blows per minute: 700 min⁻¹ Shoe width: 200 mm or 280 mm Engine: Honda GXR 120 petrol engine Engine output: max. 2.7 kW Fuel: Petrol Starting system: Recoil start Features & Equipment: - Proven rammer for professional compaction applications - Reliable Honda GXR 120 engine – powerful & durable - 200 mm or 280 mm shoe width – ideal for trenches & confined job sites Pgedozh Dy Iopfx Ac Hsr - High impact rate for efficient compaction - Compact & robust design – optimal for construction site use - Quality by Weber MT – immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & gardening ✓ Compaction in trenches & narrow areas ✓ Municipal operations & construction companies ✓ Fiber optic & network installation Location: Warehouse D 46514 Schermbeck (NRW) – Inspection & collection possible Delivery across Germany & internationally on request Pricing ex works Maassenstraße 91, D 46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further models available! SRV 620, SRV 660, etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Weber Rammer | SRV 590-II NEW | Petrol Rammer | Honda GXR 120 | 280 mm shoe width | Weber MT Compaction Technology Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! On request, we are happy to offer you a virtual machine inspection via video call.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 44.7 kW (60.78 HP), Technical Data: Operating height: 900 mm Operating width: 1350mm Max. workpiece thickness: 99mm Min. workpiece thickness: 0.8mm Dimension of the machine: Weight: approx. 4800kg Width: approx. 2800mm Pgedpfx Ajwnw E Tec Hsr Length: approx. 3460mm Height: approx. 2440mm We bought the machine in 2020 and refurbished it. It comes with a new conveyor belt.

Condition: used, mileage: 1,001 km, power: 4 kW (5.44 HP), gearing type: other, fuel type: diesel, color: yellow, first registration: 01/1999, Year of construction: 1999, driver cabin: other, Vehicle location: Bovenden, Pedpfoxy Swxjx Ac Hogr Hatz Diesel Engine E 673LS! Forward and reverse gear! The exact year of manufacture and power output cannot be determined as there is no type plate present! Equipment details provided without guarantee; subject to change, prior sale, and errors!

Condition: good (used), Year of construction: 1994, Model: NE 12 Screw type: Single screw Year of construction: 1994 Screw diameter: 130 mm L/D ratio: 30 L/D Drive power: 350 kW Including: • Machine was in production when dismantled • Machine was producing 710 mm pipes • Output on HDPE approximately 1,000 kg/hour Pedpfxjyxpbus Ac Hogr • 800 mm extrusion head