Used Weber Srx 65 for sale (90)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Gbodjyhcabspfx Abuoh Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m Gjdpfx Aeb A Sxgjbujbh -Weight: 72 kg -Functionally tested

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Gbsdpfxevryhyj Abueh Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. Gbedeydmkpopfx Abush A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Gedoyhcl Dopfx Abuebh Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Gbodpfx Abeyhckajuoh Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Gbjdpfx Abeyhcc Aouoh Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Gedpeku Aw Njfx Abusbh Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, tank capacity: 270 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 260 mm (handhole cover plated); deposits and metallic discoloration inside the vessel Internal diameter: 690 mm Total height: 2,120 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 270 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 670 mm Last intended use: biochemistry VESSEL Support type: feet Number of feet: 4 pcs EQUIPMENT Gbjdpfeyciydex Abush Manhole / dome: handhole Outlet: 52 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 8 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New Unit / In Stock & Immediately Available Sales Price: €11,190.00 net / €13,316.10 gross 3-Year Manufacturer’s Warranty Technical Data: - Engine: Hatz Diesel - Max. Engine Output: 10.5 kW (14.3 hp) - Weight: 608 kg - Centrifugal Force: 75 kN - Frequency: 67.5 Hz - Working Width: 70 cm Weber Smart Assist (WSA): - Evaluates signals from the machine’s integrated sensors and displays them graphically via symbols - Similar to the previous Weber MT engine protection system, the engine will shut down whenever continuation could cause engine damage - Symbols also indicate to the operator how to resolve any displayed issues - In the event of a heavily soiled air filter, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also features the newly designed COMPATROL compaction control system - Provides the operator with a clear and easily readable bar graph display of compaction progress - New operating concept: After starting the engine, vibration is activated at the press of a button - There is no throttle lever as the engine automatically adjusts to the correct RPM The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running properties, high operating smoothness, and low hand-arm vibrations ensure a high level of operating comfort. CR 8 – Economical Machine with Powerful Compaction: - Infinitely variable forward and reverse travel; hydraulic reversing - Throttle cable and hydraulic reversing system routed and protected within the guide handle - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Engine and machine protection via protective frame and cover - Lower maintenance requirements thanks to self-adjusting centrifugal clutch - Easy servicing with all maintenance components easily accessible - Safe and quick loading via large, foldable lifting eye - Secure tie-down for transport thanks to additional lashing points on the engine console - Greater operator comfort due to electric start - Areas of application: road and civil engineering, paving work, and, thanks to the low overall height and working width, the CR 8 is also ideal for trench shoring We have a large selection of various vibratory plate compactors in stock and available for immediate delivery! Gbjdsyi Rzvspfx Abujh Mr. Herden will be happy to assist you by phone at ... Upon request, we will also be pleased to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). Weber CR 9 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New unit / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3-year manufacturer warranty Technical specifications Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/hp Weight: 743 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Analyzes signals from the machine’s integrated sensors and displays them graphically using symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if continued operation would risk engine damage - Error symbols guide the operator step-by-step in troubleshooting - For an excessively dirty air filter, the cleaning and replacement process is shown step-by-step - Weber Smart Assist also includes the COMPATROL compaction control system, now in a new design - Displays compaction progress on an easy-to-read bar graph - New machine operation: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine speed is regulated automatically The reversible soil compactors of the CR series impress with strong compaction performance and maximum efficiency. They are first choice for classic road and civil engineering as well as paving applications. Well-balanced running characteristics, high stability, and low hand-arm vibration ensure outstanding operator comfort. CR 9 – Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic changeover are safely routed inside the guide bar - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide handle - Protection of machine and engine by engine protection frame and motor cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, with all maintenance components readily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing points on the engine console - Greater operator convenience via electric start - Application areas: road and civil engineering, paving, and—thanks to the low overall height and working width—the CR 9 is also ideal for trench shoring We have a large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. We will gladly provide you with a financing offer upon request. We are an official Weber MT sales and service partner. Godeyi Rzpopfx Abuobh We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Year of construction: 2022, condition: used, For inquiries regarding the machine, Mr. Herden will be pleased to assist you (by telephone at ...). Weber CR 9 Hatz Diesel Vibratory Plate Compactor / Year: 2022 / Electric Start / DEMO unit Sales price: €9,490.00 net / €11,293.10 gross Warranty until 01 / 2026 Technical Data Engine: Hatz Diesel Max. engine output: 11.0 (15.0) kW/hp Weight: 736 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks ranging from classic road and civil engineering to paving construction. Well-balanced running properties, low operator hand-arm vibration, and smooth operation ensure high comfort levels. CR 9 – The new premium class: powerful, robust, reliable: - Precise, infinitely variable electrohydraulic changeover of forward and reverse travel via tip control - Throttle cable and hydraulic control line protected within the guide handle - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Protection of machine and engine by full cover and protective frame - Reduced maintenance thanks to self-tensioning centrifugal clutch Gbodjyii S Dspfx Abush - Easy servicing, with all maintenance components easily accessible - Safe and quick loading thanks to large, foldable lifting eye - Safe lashing for transport with additional lashing eyes on the engine console - Enhanced operator comfort with electric start featuring hour meter, engine oil and battery voltage monitoring - Application areas: road and civil engineering, trench work, landscaping, sub-base preparation for paving, vibration settling of paving stones, and compaction of sand, gravel, or crushed stone We stock a large selection of various plate compactors for immediate availability! Simply contact us at ... for further information. Upon request, we are also pleased to offer financing options. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range for you! Subject to errors and prior sale! Internal No.: 066149 = More information = New: Yes Unladen weight: 736 kg Engine make: Hatz Contact Tobias Ebert for more information.

Year of construction: 2022, condition: used, For enquiries about the machine, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 9 MDM Hatz Diesel Reversible Plate Compactor / Year: 2022 / Electric start / DEMO unit Sale price: €10,090.00 net / €12,007.10 gross Warranty until 10 / 2026 Technical Data: Engine: Hatz Diesel Max. engine output: 11.0 kW (15.0 HP) Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors from the CR series impress with powerful compaction performance and maximum efficiency. They are the first choice for compaction work, from traditional road and civil engineering to paving construction. Balanced running properties, high smoothness, and low hand-arm vibrations ensure a high level of operating comfort. - Precise, stepless electro-hydraulic changeover of forward and reverse via tip-control - Engine protection - Throttle cable and hydraulic changeover routed securely within the guide bar - Low hand-arm vibrations - Fatigue-free operation with height-adjustable steering handle - Protection of machine and engine via sturdy frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy service as all maintenance components are easily accessible - Safe and quick loading with large, foldable lifting eye - Safe lashing for transport thanks to additional tie-down points on the engine console Gbodpfxjyii Sws Abuoh - Increased operating comfort thanks to electric start with hour meter, engine oil and battery voltage monitoring - Application areas: road and civil engineering, trench construction, landscaping, sub-base for paved areas, vibration of paving stones, and compaction of sand, gravel or crushed stone We keep a very large selection of different plate compactors in stock, available immediately! Please contact us for further information at ... / ... On request, we are happy to provide you with financing options. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted! Internal reference no.: 080682 = More Information = New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Tobias Ebert for further information.

Year of construction: 2022, condition: used, For inquiries regarding the machine, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 8 MDM Hatz Diesel Vibratory Plate Compactor / Year of manufacture: 2022 / Electric start / DEMO unit Sales price: €8,590.00 net / €10,222.10 gross Warranty valid until 10 / 2026 Technical Specifications Engine: Hatz Diesel Max. engine output: 10.0 kW (13.6 HP) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm The reversible soil compactors of the CR series stand out with their powerful compaction performance and maximum efficiency. They are, therefore, the first choice for compaction work ranging from classic road and civil engineering to paving. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure a high level of operating comfort. CR 8 – The new premium class: powerful, robust, reliable operation: - Infinitely variable forward and reverse travel - Engine protection - Increased operating comfort thanks to electric start and hour meter - Hydraulic throttle control and hydraulic switching protected within the control bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable control handle - Protection for the machine and engine through frame and full engine cover - Reduced maintenance requirements due to self-tensioning centrifugal clutch - Easy servicing as all maintenance components are easily accessible - Safe and quick loading by means of large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Areas of application: road and civil engineering, trench construction, sub-base preparation for paving and compaction of sand, gravel, or crushed stone At our warehouse, we have a very large selection of different vibratory plate compactors available for immediate delivery! Simply contact us at ... Upon request, we are also happy to provide you with a financing quote. We are an official sales and service partner for Weber MT. We are an official sales and service partner for JCB Construction Equipment. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for DMS. We are an official sales and service partner for Holp. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Gbodpfeyii Sqsx Abuoh We supply the complete Weber MT range for you! Subject to prior sale and errors! Internal No.: 078050 = More information = New: Yes Unladen weight: 605 kg Engine brand: Hatz Please contact Tobias Ebert for further information.

Condition: ready for operation (used), total length: 2,050 mm, total width: 850 mm, total height: 1,350 mm, overall weight: 300 kg, WEBER desulphurizer. Type - ASB 1000 Belt dimensions - Gbjdpfx Aorq Dmcsbuoh Length - 205cm. Width - 40cm. Infeed - 90cm. Exit - 113cm. Roller width - 48cm. Total dimensions - Length - 205cm. Width - 85cm. Height - 135cm. Weight - 300kg. TJ.

Condition: ready for operation (used), A high-performance slicer and portioner Weber including scale, knife sharpener and a conveyor belt is available. Knife type: circular knife, knife diameter: 460mm, slicing thickness range: 0.1mm-50mm, design: 1200mm, machine dimensions X/Y/Z: approx. 2500mm/1200mm/2200mm, weight: approx. 1500kg. An on-site inspection is possible. Gjdpfx Asygmbtsbuebh

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm Godex U A Iaopfx Abujbh x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Gjdpeyimqwjfx Abuobh Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2022, functionality: fully functional, -Passenger car wheel balancer Weber STW-201, year of manufacture 2022, 4 standard aluminium programs, static and dynamic modes, automatic balancing cycle with wheel braking, integrated software for self-test and calibration, optimization function for weight display. Gedpfeyh E Rgex Abusbh

Condition: good (used), Year of construction: 2022, functionality: fully functional, - Passenger car wheel balancer Weber STW-201, year of manufacture 2022, 4 standard aluminium programs, static and dynamic balancing programs, automatic balancing process with wheel braking, integrated software for self-test and calibration, optimization function for weight display Gbsdpeyh E Npofx Abueh

Condition: ready for operation (used), functionality: fully functional, Weber slicing line mod MCS 902 whit check weigher and outfield conveyor direct taken out off production site here in Sweden. Gbedpfx Abeydpd Esujh

Year of construction: 2000, condition: ready for operation (used), Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts. Gsdpfegmdr Uox Abuobh

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm Gbsdjdp Dvtopfx Abuoh -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 Gedpfx Absv Tahieujbh -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Gbjdpfjb A I Hisx Abujh -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece