Used Weiler E 80 for sale (174)

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Ppedpfsmdn Dxsx Aaajp

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning length: 750 mm, turning diameter: 330 mm, spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Pjdpfjxf Hiaex Aaaopp Turning length: 750 mm Turning diameter: 330 mm Diameter over cross slide: 160 mm Spindle bore: 43 mm Maximum spindle speed: 4,500 rpm MACHINE DETAILS Control: Siemens EQUIPMENT Collets Jaws Tool holder

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 Ppsdpfxeu Aftgo Aaaep >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop Podevtp Edepfx Aaajpp >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> Psdpfx Aevivmyeaaopp To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Podjwrmuxopfx Aaaepp A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard Psdpfx Ajw Nw Dqsaajpp >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes Podpfx Aajxu Hlaeaopp >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm Podev D Ip Nopfx Aaajpp with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Pedsmgaddjpfx Aaaspp Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions Ppodohy Tdyjpfx Aaaop with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Psdpeg R S Rcjfx Aaaepp Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Psdpfx Aashtnu Toaopp

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Ppsdpsn Ard Dsfx Aaajp

Condition: excellent (used), Year of construction: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture: 2003 Engine lathe WEILER type Condor 81 Distance between centers: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Tailstock quill taper: MK 3 Pedpfxew T U Sgj Aaaopp Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speeds via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1,100 kg Accessories and equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant installation Heidenhain digital readout About the machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year 1992, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and can achieve ground-like finishes. Take the opportunity to inspect this machine under power at our location and see its condition for yourself. You can find more lathes from renowned manufacturers on our website.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis Digital Readout, Infinitely Variable Speed, As-new Condition, Year of Manufacture 2019 Technical Data: >> Year of manufacture: 2019 Machine no. OD08 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Number of feeds: 24 >> Longitudinal feed: 0.02 to 0.63 mm/rev >> Cross feed: 0.006 to 0.2 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 1150 kg >> Spindle brake >> Dimensions (LxHxD): approx. 1.72 m x 1.7 m x 0.89 m Accessories and Equipment: >> Weiler digital readout >> New collet chuck system; new collets from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size B with 3 tool holders >> 1 bed stop Ppodpfsw Swkvox Aaaop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts plan Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the relevant handwheel when feed is engaged VCplus Digital Readout: >> 8-inch color screen >> 3 axes for bed, cross slide and compound slide >> 99 tool memory locations >> Oriented spindle stop >> Input for constant speed or cutting speed >> Feed rate and thread settings displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis digital readout. Year of manufacture 2019, in as-new condition with original paint. The machine is, of course, fully functional and equipped with new collets and chuck. You are welcome to inspect the machine under power on site and see its condition for yourself.

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Ppsdpfxsxv A I Te Aaasp Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Year of construction: 1973, condition: excellent (used), turning length 125 mm Pjdpfx Aajxpxqwoaepp weight of the machine ca. 0,4 t

Condition: used, Year of construction: 1999, turning diameter 150 mm Ppjdpfxevm Dv De Aaasp turning length 500 mm total power requirement 4 kW weight of the machine ca. 0,8 t

Condition: used, Year of construction: 1985, Weiler Praktikant 140 lathe, built in 1985, with three-jaw chuck and Multifix. The Z-axis guide is slightly worn in the front area. The machine is in good working order. Can be demonstrated live by arrangement. Podov N Awfspfx Aaaopp

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Pedpfx Aexp Ru Ueaaepp

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Ppedpfx Ajxp Rvlsaaep

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Ppjdpexw H Dbjfx Aaajp Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Podpfx Aaexnp I Deaspp Weight: approx 500 kg Machine in VERY GOOD CONDITION