Center lathe

Weiler Praktikant 160

Condition: used, Year of construction: 1999, turning diameter over bed 330 mm turning diameter over slide rest 195 mm turning length 750 mm center height over bed 160 mm centre distance 650 mm digital readout 3 Achsen HEIDENHAIN bed width 205 mm spindle bore 36 mm spindle taper KK5 DIN 55027 turning speed range 48 - 2500 U/min power requirement 3,0 kW 4-jaw-chuck diameter 160 mm quick change toolholder MULTIFIX Typ A taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 100 mm voltage 400 V total power requirement 3,2 kW weight of the machine ca. 680 kg Dodezy Sb Depfx Ab Dscl dimensions of the machine ca. 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Dcjdpfewzzgnox Ab Dsl Subject to price changes, errors, printing and typographical mistakes excepted.

Condition: reconditioned (used), Year of construction: 2001, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 2001 – partially overhauled Newly painted RAL 7035 light grey Machine No.: 4790 Center height: 160 mm Distance between centers: 650 mm Warranty: 6 months on the mechanics, which have been partially overhauled by us. The warranty does not cover the electrical and electronic components, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, the travel costs must be borne by the customer. Geometric acceptance with test report Accessories: Dsdpfxozy Ngqj Ab Docl - 3-axis digital display FAGOR Innova 30i T, new - Lever-type collet quick-change chuck for collet type K32 (386E) - Covered guide and lead screw - Braked drive motor - Coolant system - Electrically secured chuck guard, new - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

Condition: excellent (used), Year of construction: 1994, turning diameter over bed 320 mm Dsdpfx Abezy D Amo Djcl turning diameter over slide rest 190 mm turning length 650 mm turning speeds 3000 U/min spindle bore 40 mm tailstock quill taper MT MK3 weight of the machine ca. 1000 kg dimensions of the machine ca. 1800 x 900 x 1600 m

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Dcjdpfxsy E S D Ej Ab Dsl

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Dedpfx Aozwcn Nob Decl Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system 1 4-jaws chuck Ø 135 mm 7 MULTIFIX tool holders + various tools ariousSet of clamps Voltage: 380 V Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Djdozq R Ecopfx Ab Djcl Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Model: FP 2 Machine No.: 9585 Dsdpfjygicajx Ab Decl Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Dcjdpfezpfw Dsx Ab Del

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 Dcodpezd Tycsfx Ab Djl >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Dcjdpjx S Rcmjfx Ab Djl

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: Dedpfx Aboy D N Das Dscl - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws Dcjdpfxsy Ulqwo Ab Del >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm Dcedpsu Tuk Hofx Ab Dol - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Dcodpfxjw Sdr He Ab Djl Emergency stop