Used Weiler Md 260 for sale (176)

Condition: used, functionality: fully functional, This Weiler Commodor lathe comes from a technical school and, as such, has low operating hours. Lightly used and not heavily loaded – a tidy, reliable machine with a long service life ahead. Turning length: 1,000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed range: 25 – 2,000 rpm Number of speed steps: 18 Spindle bore: Ø 56.0 mm Spindle taper: MK DIN 228 / MK 4 Spindle flange: DIN 55027 / size 6 Cross slide travel: 150 mm Bed width: 310 mm Feed rate – longitudinal: 0.022 – 0.8 mm/rev Feed rate – cross: 0.011 – 0.4 mm/rev Iijdpfx Apsw U Sx Hjnjb Voltage: 380 V Total required power: 7.5 kW

Condition: good (used), Year of construction: 2000, Weiler Primus VC, year of manufacture 2000, digital readout, center distance 500 mm, max. turning diameter over cross slide 150 mm, spindle speed up to 4,000 rpm, spindle bore 40 mm, spindle drive 1.5 kW, Multifix toolholder, 24 longitudinal feeds, metric threads, imperial threads. Isdpfsyh Hkhex Apneib

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Ijdpfx Apsyciw Asnsib Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Spindle bore: 36 mm Spindle speed: 56 – 2000 rpm Tailstock: MT 3 Drive power: 2.4 kW Iijdpfsypbypex Apnjb Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Digital readout: Optional at extra cost Accessories: Additional accessories available on request!

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: Iijdpfevrcqdsx Apnob A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop Iiodpfx Asvrckqepnob >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm Iiodsv Tyzcepfx Apnjb >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders Iodpovv Etvefx Apnjib >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg Iijdpfx Apsvrdlcjnsb >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch Iiodpewrm Dtofx Apneb >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 Iisdpfxewthbie Apnob >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Iiodov Nhxzjpfx Apnob Torque: 8,000 Nm Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Quill stroke: 400 Features ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Ijdpfxjx Urmle Apnsib

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning length: 750 mm, turning diameter: 330 mm, spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Iiodpfxoxf Hiao Apnob Turning length: 750 mm Turning diameter: 330 mm Diameter over cross slide: 160 mm Spindle bore: 43 mm Maximum spindle speed: 4,500 rpm MACHINE DETAILS Control: Siemens EQUIPMENT Collets Jaws Tool holder

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle bore: 83 mm, turning diameter: 570 mm, swing diameter over cross slide: 340 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, The machine is designed for heavy-duty turning and series production due to its robust construction! TECHNICAL DETAILS Ijdpfx Aoymx N Nopneib Speed range: 1 – 2,500 rpm Torque: 1,300 – 1,600 Nm Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Center height: 280 mm Distance between centers: 2,000 mm Spindle bore: 83 mm (optional 128 / 165 mm) Number of turret positions: 8 Turret tool holder: VDI 40 shank Tailstock quill diameter: 80 mm Tailstock taper: MK5 MACHINE DETAILS Control system: WEILER SIEMENS 810D Main drive power: 20 / 17 kW (60% / 100% duty cycle) Dimensions & Weight Dimensions (L x W x H): 3,850 mm × 1,850 mm × 1,750 mm Machine weight: 4,200 kg

Condition: new, Year of construction: 2025, CONDOR VC plus The new dimension in conventional precision lathes. A high-quality, powerful and energy-efficient precision lathe for the highly productive area of production and toolmaking, but also for training and further education High-quality, energy-efficient, precise and universally applicable in production, training and further education. It impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimum space requirement and a wide range of accessories. The consistent and innovative further development of the tried-and-tested Condor series is the economical and intelligent solution for your daily applications. Technical data: WORKING AREA Center height 180 mm Swing diameter over bed 360 mm Swing diameter over facing slide 190 mm Center width 800 mm Iiodpfoqwipnex Apneb TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 6 Spindle bore 57 mm Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % ED - / 10.5 kW Speed range 25 - 4,000 min-1 Number of speeds infinitely variable FEED RANGE Number stepless Longitudinal 0.01 - 6 mm/rev Plan 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK Quill diameter 50 mm Quill stroke 110 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clearly arranged 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swipe movements - Operating functions can be called up via app manager - Control panels can be freely configured, placed and scaled as required - Drawings / sketches can be imported from PDF files Can be zoomed individually via USB interface - Video-supported maintenance of the machine - Context help menu (instead of screen display WEILER VC plus) The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable Iodpfx Apox E Um Nenoib - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: new, Year of construction: 2025, GSD Intern One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 Ijdpewhzcpefx Apnjib ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Iiodpfxouqb Eme Apnsb Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: ready for operation (used), Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible. Iiedpfjx Hz Rqsx Apnob

Condition: ready for operation (used), A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible. Isdpoyarqgefx Apneib

Condition: ready for operation (used), A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible. Iodpfxox Hz N He Apnjib

Condition: good (used), WEILER COMMODOR L&Z Lathe from German Army (Bundeswehr) stock - Good, fully operational condition - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25 - 2000 rpm - Threads: Metric / Inch etc. - Automatic longitudinal & cross feeds - Tailstock MT 4 Iiedpfx Apeykknfenjb - 3-jaw chuck 250 mm - Electric chuck guard - Multifix base holder & inserts - Coolant system - Chip guard rear wall - Machine documentation Dimensions (LxWxH): 2.5 x 1.3 x 1.7 meters / Weight: 1500 kg Subject to errors and omissions

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Model: Primus VCD Precision Lathe Year of manufacture: 2017 Isdpsx Nkdxjfx Apnjib Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Scope of delivery: - Documentation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Iiodpfxox Ivy Ns Apnob Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B