Used Weiler Ud for sale (206)

Condition: ready for operation (used), Weiler Commodor B including a new 3-axis digital display from an educational institution -GS designation -Three-axis digital display, "NEW" -Center height 180mm Ibjdpfx Aozq Dkloiwsa -Distance between centers 1000mm -Spindle bore 56mm -Spindle speeds 15 - 2000 rpm -Automatic longitudinal / crossfeed -Threading / Metric / Inch / Module / Diametral Pitch -Electric chuck guard -2x Emergency stop -Multifix with inserts -Four-jaw chuck - Röhm -Chip guard -Coolant system -Very well-maintained original condition -Documentation Dimensions: L x W x H 2.3 x 1.2 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Ibodsx Urmlspfx Aiwsa

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, Ibodeuqb Emjpfx Aiwoa With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS D1 - Zyklen Storage location: Halberstadt Country of origin: Germany Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Ibodpfszkpwqsx Aiwea Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 325 mm, spindle bore: 83 mm, turning length: 2,000 mm, turning diameter: 570 mm, total length: 3,950 mm, total width: 1,900 mm, workpiece weight (max.): 1,600 kg, overall weight: 4,300 kg, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, Selling a used Weiler E55 lathe with a 2m center distance. Year of manufacture: 2006 Control system: Weiler cycle control D3 Technical data: Center distance: 2000mm Center height: 280mm Swinging diameter over bed: 570mm Swinging diameter over cross slide: 325mm Spindle bore: 83mm Spindle speed: 1-2500 rpm 2 gear stages Tailstock internal taper of the quill: MK5 Quill travel: 200mm Iedpfx Aeztathjiweba The cross slide in the Z-axis was replaced in 2025. The machine is powered and can be inspected and tested. Accessories: Capto tool holder Coolant pump Chip tray Machine feet 3-jaw chuck Lynette Documentation

Condition: used, Year of construction: 1996, Weiler Guide and Pull Spindle Lathe Type/Model: Condor AC Condition: Used Year of Manufacture: 1996 Technical Data: Center height: 165 mm Distance between centers: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm Spindle bore: Ø 40 mm Spindle speed, stepless: 22 - 2,800 rpm Spindle head: DIN 55027 Size 5 (short taper) Drive power: 5.5 kW Tailstock and feeds: Tailstock internal taper: MK 3 Quill stroke: 110 mm Feed range automatic longitudinal and cross feeds: approx. 0.016 - 0.50 mm/rev Thread cutting range suitable for metric threads and inch threads: approx. 0.20 - 28 mm Dimensions (L/W/H): approx. 2000 mm x 860 mm x 1600 mm Iedpfx Aozfgupjiwsba Weight approx.: 1,100 kg Equipment: - Quick-change tool holder system Multifix, 1 insert size A - Bed stop - Coolant system - Chuck guard with limit switch - Collet chuck system, limit switch secured Costs for delivery by freight forwarder, free to curb, see shopping cart or in individual offers for request items.

Condition: used, Year of construction: 1992, Weiler Guide and Lead Screw Lathe Type / Model: Condor B Condition: Used Year of Manufacture: 1992 Technical Data Center height: 165 mm Center distance: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm - 185 mm Main spindle and drive Speed range: 22 - 2800 rpm Spindle bore: 40 mm Spindle head: DIN 55027 / Size 5 (with bayonet fitting) Drive power: 3.2 kW Feed and threading Longitudinal feeds: 0.016 - 0.8 mm/rev Metric thread pitches: 0.18 - 28 mm Tailstock Internal taper of the quill: MK 3 Ibjdozfhgtspfx Aiwsa Quill travel: 110 mm Dimensions (L/W/H) approx.: 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Delivery costs via freight forwarder to the curb are shown in the shopping cart or in the individual offer for items on request.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system 1 4-jaws chuck Ø 135 mm 7 MULTIFIX tool holders + various tools ariousSet of clamps Voltage: 380 V Iodpfxjzqn Tws Aiweba Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW Isdpfx Aiszhcfvewsba max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Ibjdpfx Ajzpfw Deiwja

Condition: good (used), Year of construction: 1994, cycle controlled lathe Machine type: Weiler E 35 Control: Siemens 805 Year: 1994 Available after: sofort / now SPECIFICATIONS Center height: 200 mm Max. turning length: 950 mm Turningdiameter: 410 mm Max. swing over slide: 200 mm Ibjdpfx Asziy A Isiwja Spindle bore: 54 mm Spindle speeds: 20 - 3.000 rpm Tailstock: MK 4 Travel X-Axis: 230 mm Power consumption: 10 KW Machine weight: 2100 kg Equipment 46 Spannzangen 173 E nach DIN 6343 / 46 collets 173 E DIN 6343

Condition: used, turning length 500 mm turning diameter over bed 297 mm Ijdpfx Aisxacgdswoba turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: ready for operation (used), L & Z lathe WEILER MATATOR incl. Heidenhain digital display ND 780 -Center height approx. 150mm -Swinging diameter over carriage approx. 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Three-axis digital display / Heidenhain -Collets / quick-change tool holder & various collets Ibjdpfx Ajzpba Ujiwoa -Chuck guard -Chip guard -Multifix base plate & inserts -Spindle bore 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK 3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 600 kg Errors and omissions excepted.

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard -Coolant system Ibodpfezn Rahsx Aiwsa -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Iedpfx Aewcxf Doiweba Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Year of construction: 1973, condition: excellent (used), turning length 125 mm Ibsdpoxpxqwofx Aiwsa weight of the machine ca. 0,4 t

Condition: used, Year of construction: 1999, turning diameter 150 mm Ibedpfx Aijvm Dv Dswoa turning length 500 mm total power requirement 4 kW weight of the machine ca. 0,8 t

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: EK01, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 600 mm, spindle bore: 83 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,800 mm, total length: 4,500 mm, total width: 2,300 mm, quill diameter: 80 mm, quill stroke: 200 mm, workpiece weight (max.): 1,800 kg, type of input current: AC, torque: 1,500 Nm, overall weight: 4,500 kg, swing diameter over bed slide: 570 mm, spindle nose: DIN55027 Größe 8, Equipment: documentation/manual, Cycle control: - Sinumerik 810D with Weiler software "D3" - 3-jaw chuck: Ø315 - 4-position tool holder Parat: Size 3 - Various tool holders (without tools) are included - Coolant level 1: 20 l/min at 2 bar - Coolant level 2: 30 l/min at 10 bar - Chip conveyor with discharge height of 1250 mm - 3 steady rests Tailstock - Arbor diameter: Ø80 mm - Arbor travel: 200 mm - Internal taper of the arbor: MK5 Application area: The machine was used in our production for the machining of various materials. These include various grades of steel, stainless steel, brass, and aluminum. The machine is suitable for both single-part and small-series production and was used in single-shift production. General information: The machine is being sold due to the purchase of a new machine. It is currently still in our ongoing production and can be inspected and tested at any time while powered and in operation. The machine bed shows signs of wear and tear due to age and use. For the highest precision requirements, we recommend an overhaul of the bed guides. However, the machine is still ready for use and productive. Ijdpfx Aijzumfasweba

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture 2008, Siemens 840 D control system, Travel range X/Z 200/350 mm, Turning diameter 180 mm, Maximum swing diameter 560 mm, Y-axis +/- 25 mm, Q-axis / programmable steady rest, Q-axis travel range 360 mm, Q-axis rotary measuring system, Steady rest, MK 4, Main spindle, maximum bar diameter 42 mm, Spindle bore 52 mm, Rapid traverse rate X/Z/Q 30/30/20 m/min, 16-station turret - all stations driven, VDI 25, Shaft diameter 25 mm, Ibjdpfjzlc Ekex Aiwja Driven tools up to 4,500 rpm, Tool tray, Accessories, Gobmey Ev Iusbf Sljbp, Driven tool holder, Fixed tool holder.

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left Iedpfxsxmaktj Aiwjba - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - EMERGENCY stop button - Operating instructions

Condition: used, Year of construction: 1979, 1 used lead screw and turret lathe Manufacturer: Weiler Type: Commodor Technical data: Center height: 190 mm Swinging diameter over bed: 380 mm Swinging diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Ibodpfx Aiezlgxnowea Spindle mounting: DIN 55027 size 6 (A2-6) Spindle taper: MK 6 Spindle diameter in the front bearing: 90 mm Speed range: 25 – 2000 rpm Number of speeds: 18 steps Longitudinal feed: 0.026 – 0.90 mm/rev Cross feed: 0.013 – 0.45 mm/rev Metric threads: 0.3 – 10 mm Inch threads: 80 – 2.75 threads/inch Tailstock quill stroke: 150 mm Tailstock quill taper: MK 4 Dimensions: Length: approx. 230 cm Width: approx. 110 cm Height: approx. 200 cm Weight: 1600-1700 kg with digital display

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg Iedowa Dz Ejpfx Aiwjba dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest Isdsy Hxp Djpfx Aiwsba The machine comes from the training workshop of a renowned German corporation.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Ibjdpoxq Hhyefx Aiwsa Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Primus LZ G GS Lead and Draw Spindle Lathe, 3-axis, Heidenhain, Accessories, Very good condition!!! Technical data: >> Year of manufacture 1990, Machine no. 4718 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev Ijdpfxozg U Efj Aiwoba >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Brake motor >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, with 4 sets of jaws >> 1 four-jaw chuck, 125 mm, with 2 sets of jaws >> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments >> Spindle stop for collets >> Mulifix size A with 3 steel holders >> 3 drill chucks >> Coolant system About the machine: Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.