Moulder

WEINIG Unimat 23E

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table. Kledpfsxg Sa Hex Al Nou

Condition: used, Number of boring spindles 5 St. Working width 230 mm Kodpfx Asx Ecguol Nslu Working height 120 mm

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Klodpfx Aexz Hh Uel Nou Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: used, Year of construction: 2001, functionality: fully functional, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, – German-made – Year of manufacture: 2001 – Total power: 42 kW – Driven rollers in the table TECHNICAL SPECIFICATIONS: – Planing width: 230 mm – Planing height: 170 mm – Electric height adjustment – Spindle diameter: 40 mm – 1st (bottom) spindle: 7.5 kW – 2nd (left) spindle: 11 kW – 3rd (right) spindle – 4th (top) spindle: 11 kW – 5th (bottom) spindle: 5.5 kW – Continuously variable feed speed: 6–38 m/min – Feed motor power: 4 kW – Infeed table length: 1000 mm – Electric brakes – 5 driven top steel rollers – 1 driven top rubber roller Klsdpsw H Smhofx Al Nju – 2 driven table rollers: one is toothed – Air cushion in the table – Pneumatic pressure system – Feed via cardan shafts – Outlet diameter: 5 x 140 mm – Centralized table lubrication system – Machine dimensions (L/W/H): 390 / 210 / 230 cm – Weight approx. 4000 kg

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm Ksdpfxewvqklo Al Nelu • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: used, Year of construction: 1995, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 1,500 mm, number of spindles: 8, Equipment: cabin, Weinig Unimat 23e Moulding machine (8 spindles) Description; Year of construction 1995 Dimensions of the infeed table: 1500 mm Number of axes: 8 Spindle Sequence: Bottom-right-left-right-top-bottom-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 6-24m/min Groove bed: No (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Kledpjyx Tiijfx Al Nou Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 1997, condition: excellent (used), max width of the workpiece 23cm max height of the workpiece 18cm 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 top horizontal spindle heads adjustable up / down, right / left spindle diameter 40mm Kodpfx Aljk Dxraj Nolu Hydraulic side feed on the feeding table

Condition: good (used), Esterer board sorting plant / sorting plant / length sorting plant right hand discharge 5 sorting boxes Total length 26 meters 1st box 2 meters 2nd box 3 meters 3rd box 4 meters Ksdpfsgw Scqsx Al Nslu 4th box 5 meters 5th box >5 meters good condition - available immediately Location: Germany, near Landau an der Isar Please visit also my other advertisements. I am looking forward to your inquiry.

Condition: used, Technical specifications: Maximum planing width: 240 mm Maximum planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle configuration: bottom 5.5 kW right/left 7.5 kW top 5.5 kW top 5.5 kW bottom 5.5 kW universal 5.5 kW 1/4/5/6 spindles on separate motors 2/3 on a single motor Ribbed worktables Ribbed rollers in the table: 2 Upper steel feed rollers: 5 Upper rubber feed rollers: 3 Extraction port diameter: 6 x 140 mm Infinitely variable feed rate Feed drive on cardan shafts Klsdpfx Ajycu R Ijl Nsu Lubrication pump for worktable 2 smooth rollers in the table Pressure: 6 atm. Electric elevation of machine body Power supply: 400 V Total power: 32 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Ksdpju Damdjfx Al Nelu

Condition: used, Number of boring spindles 6 St. Kledpfx Ajya Hh Tjl Nsu Working width 230 mm Working height 120 mm