Used Welding Fume Extraction Systems for sale (41,173)

Condition: excellent (used), Year of production: 2017/2018 Quantity: 5 pieces Operating airflow at 15 kPa pressure - 500 m3/h (942 cubic feet per minute) Main filter area - 3.4 m2 (36.6 square feet) Main filter material - polyester Ambient temperature - -10 °C to +40 °C (14 °F to 104 °F) Process air temperature - 0 °C to +60 °C (32 °F to 102 °F) Requirements - 6-10 bar (87-145 pounds per square inch) Consumption - 0.5 liters (0.13 gallons) per cleaning pulse Inlet hole replacement - diameter 100 mm (3.937 inches) Outlet hole replacement - diameter 105 mm (4.13 inches) Tank capacity - 50 liters (13.21 gallons) Weight - 360 kg (784 lbs) Godpfjtvf Ensx Ag Nsuh Recycling of materials - approximately 95% of weight Noise level - 70 dB(A)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Continuous duty motor Godpfx Aovpgkceg Nsuh The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. [Source: translas]

Condition: like new (used), Year of construction: 2021, operating hours: 37 h, functionality: fully functional, machine/vehicle number: 21001926, overall weight: 1,110 kg, total width: 1,510 mm, total length: 2,060 mm, total height: 3,000 mm, noise level: 71 dB, filter area: 76 m², Equipment: type plate available, Filter tower for oil and emulsion mist extraction and filtration for local ventilation. Modular system with permanent filter cartridges and two integrated, sound-insulated EC fans, adjustable via ESTA EasyControl, for installation in the work area. Application: Oil and emulsion mist extraction The unit has only 37 operating hours and is therefore as new Original net price: €24,000 Guedpfx Agjww Itms Nsh Sale only for self-collection and without warranty

Condition: new, Year of construction: 2024, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame Gedpfeuud Irsx Ag Nouh 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Gedpfx Aottah Ueg Nouh Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: used, Year of construction: 1995, functionality: fully functional, ESAB Mobile Welding Fume Extraction Unit 380V - 3N 2.2 A Suitable for fume extraction in light to medium welding applications Gsdpfx Aewvciyeg Nouh Mobile welding fume extraction unit which helps maintain a healthy working environment with clean, smoke-free air during light and medium-duty welding operations by extracting fumes directly at the source. These mobile units are user-friendly and come equipped with extraction arms approximately 3 m in length.

Condition: excellent (used), Year of construction: 2008, type of input current: AC, input voltage: 400 V, total width: 1,050 mm, total length: 1,200 mm, total height: 2,000 mm, volume flow: 1,800 m³/h, noise level: 70 dB, power: 3.3 kW (4.49 HP), We sell the professional dry filter separator Keller L-CUT 1 - ideal for efficient and safe filtration of dust and fumes generated in thermal processes such as laser cutting, welding, soldering, grinding and surface treatment with plasma or gases. Features: Compact and robust design: Designed for operation in confined spaces. Integrated spark pre-separator (KSE): Protects filters from damage by coarse particles. Gedpfownx I Aex Ag Nsuh High filtration efficiency: With the option of installing an H13 secondary filter to meet the requirements of TRGS 560 and allowing clean air to be returned to the work area. Low noise level: Built-in radial fan with silencer ensures quiet operation. Easy maintenance: Access to all key components from the front of the device. The price does not include transport.

Condition: excellent (used), Year of construction: 2017, operating hours: 463 h, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, IVAT Air-Tower 5000 K filter ventilation tower Filter ventilation of industrial welding halls - numerous technological processes in production plants, mainly carried out in metalworking. Gsdpfxevzamhj Ag Nouh Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Year of production 2017 Working hours: 463 h Parameters: Fan with a power of 3 kW. Built-in frequency converter. Efficiency 2500 m3/h - 5000 m3/h Max negative pressure 3100 Pa Filter inserts: 2 pieces Dust drawer with a capacity of 17 l. Very quiet operation 75 dB (A) Degree of purification - > 99.9 % The device is in very good technical condition.

Condition: excellent (used), Year of construction: 2019, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Mobile welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter from KEMPER. For welding, grinding and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation for the filtration of welding fumes and highly concentrated dust. Suitable for use with all welding methods for carbon, low-alloy and high-alloy steels and aluminium. Economical in operation thanks to the long service life of the filter element. Thanks to the IFA-W3 approval, the basic filter can be used for welding high-alloy steels. Parameters: Gsdpfetq E Sisx Ag Nouh Efficiency - 1100 m3/h Max negative pressure 3200 Pa Three-phase fan with a power of 1.5 Kw Filtration surface - 15 m2 Year of production - 2019 Patron Filter Insert with PTFE membrane Purification degree - > 99.97 % Preliminary spark separator. Built-in delay time regulator in start-stop mode. In the case of connecting a start-stop sensor (optional), the delay time of extraction after the welding process can be set to 5-60 seconds The device is in very good condition. Several pieces available. The price in the advertisement is for 1 piece.

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Gusdpevxtkzjfx Ag Neh Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: excellent (used), Year of construction: 2019, operating hours: 2,595 h, filter area: 302 m², suction capacity: 13,250 m³/h, negative pressure: 7,230 Pa, The Gold Series industrial dust collector is a leading dust and fume extraction system for welding, grinding, thermal cutting, shot blasting, sandblasting, and glass bead blasting. Ideal for retaining toxic and flammable dust and fumes. The vertically mounted cartridge filters in the Gold Series dust collector use the patented HemiPleat technology, which keeps them cleaner and lasts longer than conventional pleated filters. Vertical operation of the filter elements allows for their effective cleaning with a compressed air pulse. Filter cartridges with different properties provide the best cleaning efficiency for different types of dust, including fine, fibrous and heavy dust loads. The filter is pneumatically cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Camfil Model: Gold Series GS10 Year of production - 2019 Gujdpfovu Tpcsx Ag Njh Worked hours - 2595 h New HemiPleat eXtreme Flame Retardant cartridge filter cartridges - 10 pcs. Filtration area 302 m2 37 Kw fan. Efficiency 13250 m3/h Negative pressure 7230 Pa Inlet diameter - 500 mm Equipped with HEPA H14 Absolute VGXL fine filters and a noise silencer. The device worked on grinding stainless steel. The device is in very good condition (like new), it worked inside the room.

Condition: excellent (used), Year of construction: 2013, operating hours: 4,480 h, overall weight: 1,800 kg, suction capacity: 20,000 m³/h, Novus 20000 m3/h filter tower Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metalworking. Top suction and draught-free exhaust at the bottom - exactly in the work areas. The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Brand name: NOVUS Model: air FTower-20,000 Year of production 2013 working hours : 4480 Parameters: 15 Kw fan Air flow rate 20000 m3/h Filtration area 222 m2 6 pieces of cartridges Additional final fine filter with a surface area of 65 m2 in the filtration class F9 gives us a higher efficiency of air purification and further protects the fan in case of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation of 75 dB (A) Cleaning degree - > 99,9 % Gedjt R N Tljpfx Ag Neuh Technical documentation included Stock no.: 0900

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m Gedpju A Thlofx Ag Neuh width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Godpfovrgbtsx Ag Nouh Purification degree - > 99.9 % Stock no.: 0944

Condition: not inspected (used), Welding fume extraction,dust extraction,self-cleaning filter,pneumatic,vacuum. For welding,grinding,sandblasting and all kinds of dry dust. Cartridge filter cartridges. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Gusdpfx Ajip Nktjg Noh Fan of 3,2 Kw Efficiency 1600 m3/h

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Gsdpfx Agounh Uvs Neuh Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: good (used), Year of construction: 2007, functionality: fully functional, filter area: 64 m², suction capacity: 4,500 m³/h, negative pressure: 3,200 Pa, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser , sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand : ESTA Model : DUSTEX F-64 The filter is cleaned by compressed air pulses during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Parameters : Capacity - 4500 m3/h Vacuum - 3200 Pa Filtration area - 64 m2 Cartridge filter cartridges - 4 pieces. 4 Kw motor. Inlet diameter - 280mm Complete with HEPA filter of filtration class H13 Gedpfx Agovkd Rpe Njuh The device from the year 2007

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Gujden Nw Ntopfx Ag Noh Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Year of construction: 1998, filter area: 84 m², suction capacity: 2,000 m³/h, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Built-in 4 Kw fan Capacity of 2000 m3/h Filtration area 84 m2 Gsdpfx Agsttkgxs Nsuh Cartridge filter cartridges - 4 pieces. Inlet diameter 200 mm Length - 1.80 m width - 1.10 m height - 1.80 m

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Gedpfjtpui Iox Ag Neuh Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,934 h, suction capacity: 18,000 m³/h, negative pressure: 2,000 Pa, IVAT Air Tower 18000K Filtration Tower Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metal processing. Suction at the top and draft-free exhaust at the bottom - right into the work areas. The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Year of production 2018 operating hours : 3934 Parameters: 11 Kw. fan with frequency converter Air flow rate 18000 m3/h Filtration area of 150 m2 6 pieces of cartridges Very quiet operation Degree of purification - > 99,9 % Equipment: - IVAT.Energy package 11-18.5.(Siemens Frequency converter) - Control of the IVAT device in the room(fully automatic). - IVAT.Temperature control Gusdpfx Aetrwzweg Neh (Temperature control and monitoring) - IVAT Spark fire protection(sparks and fire sensors in the tower) - IVAT.Industrie-Energie4.0 (SPS Siemens + Ethernet remote maintenance + full graphics Display + connection to control center Fire alarm + energy manager) Dimensions: width - 1900 mm depth - 1530 mm height - 3600 mm

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Gsdpfxsiypxio Ag Nouh Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg

Year of construction: 1996, condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: STURM Model: 3-7x20/140 DLR P Year of production 1996 Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Gsdpfjif Rlujx Ag Nouh Cartridge filter cartridges - 7 pieces. Filtration area 140 m2 Complete with electrical diagram and partial piping

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Capacity 950 m3/h. Vacuum pressure of 2800 Pa. Gsdpfx Agjlqw Ige Njuh The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Godpohqd Tvjfx Ag Nsuh Filtration surface 128 m2