Used Welding Turning Device for sale (22,301)

Year of construction: 2019, condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable Speed continuously adjustable from 0.05 to 0.7 rpm Turntable diameter 1200 mm Tilting up to 120° Height adjustment from 1450 mm to 2050 mm Gjdpfxjd A Et Hs Aqisuf Handheld and foot-operated remote control

Operating hours: 10 h, condition: good (used), 1000 kg load capacity, height-adjustable welding rotator with a through-hole of 200 mm. Plate diameter 900 mm. Horizontal height min. 0.8 m, max. 1.6 m. Tilted height min. 0.6 m, max. 1.4 m. Speed from 0.1 to 1.1 RPM. Length 2000 mm. Width 1000 mm. Tilting up to 135°. Hand and foot remote control with speed display. Gsdpfx Aodn D U Nsqijuf Very robust.

Condition: good (used), Container rotating device, Protec Welding Technology 1000 kg load capacity with foot-operated remote control Speed of 80 - 1600 mm/min Guodpfec Ny S Nex Aqiof Diameter 20 to 700 mm

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.15 m Gjdpfxedpuape Aqijuf Tilted height min. 0.45 m, max. 0.95 m Speed approx. 0.01 - 1.3 RPM, digital display Tilting up to 135° Hand and foot remote control with speed display Very robust This rotary table is also available in stock with 1000 kg and 3000 kg load capacity.

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Gjdpjfv Huuefx Aqiouf Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: new, Year of construction: 2024, Welding positioner KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Gsdpefxz Dvofx Aqijuf Power consumption: 220 V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot pedal remote control Additional cost: Quick-change chuck Diameter: 400 mm, €550

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding turntable, 2000 kg load capacity with manual and foot-operated remote control Diameter 1200 mm Gujdpjgfqk Tjfx Aqisf Bore diameter 100 mm Height 580 mm Variable speed 0 - 0.6 RPM AC 380 V motor

Condition: new, Year of construction: 2024, Welding rotary table, 3000 kg load capacity with hand and foot control Diameter 1400 mm Bore 100 mm Gjdpfx Asgfqlisqijuf Height 580 mm Speed, infinitely variable, 0 - 0.6 RPM Motor, AC 380 V

Condition: like new (used), Year of construction: 2019, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-foot remote control Godpfx Ajd Ig H Asqijuf Height: approx. min. 700 mm horizontally, max. 1400 mm Diameter of turntable: 1400 mm Tilting angle: min. 135° Speed: 0.05 to 0.6 RPM Motor power: 3 kW

Year of construction: 2002, condition: excellent (used), Welding positioner, Mecome, 6 tons 6000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 RPM to 1.1 RPM Diameter 1500 mm Height to center when tilted 1000 mm Godpfx Aed S Hfijqijuf Height in horizontal position 1180 mm Length 2000 mm Width 1500 mm Condition: optically and technically flawless, runs very quietly.

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed continuously adjustable, 80 to 1600 mm/min. Diameter 40mm to 1400mm Gujdpfogu Edyex Aqisf Roller diameter 200mm L: 800 x W: 370 x H: 450 Model or color variations possible.

Year of construction: 1996, condition: excellent (used), Welding rotary table Hamacher 500 KK, load capacity Speed continuously adjustable from 0.01 to approximately 2.0 RPM Gjdohadtuspfx Aqieuf Height (horizontal) 800 mm, width 800 mm, length 1550 mm Diameter of the clamping disc 800 mm

Condition: like new (used), Year of construction: 2000, Welding positioner, Heinrichsglück, 15-ton capacity Condition: like new Complete with accessories: handheld remote control, foot pedal, manual, documentation, electrical diagrams – everything is included Dimensions: Diameter of the clamping plate: 2200 mm Height when tilted (to center): 1450 mm Height in horizontal position: 1800 mm Gusdpfx Aqshcbmpeisf Speed: 0.025 to 1.1 RPM Tilting range: 0 to 135° Length: 3400 mm Width: 1800 mm plus 300 mm Weight: 8000 kg

Condition: used, Technical details: power consumption: 2,3 kVA open-circuit voltage: 56 - 198 V protection class: IP 44 weight of the machine approx.: ca. 35 kg dimensions of the machine approx. HxWxD: 0,4x0,3x0,27 m equipment: - incl. earth cable and 3 pcs bolt taper Gedou Nwxzepfx Aqijuf for dia 2x 5mm and 1 x 6mm tested functional *

Condition: used, machine/vehicle number: 008411, Max. panel width: 1200 mm Max. panel length: 2700 mm Guedpfx Aqoyngy Ejijf Rotation system: double cone Rotation direction: from long to transverse

Condition: used, machine/vehicle number: 007999, Max. panel width: 1200 mm Gedpfxow Idaie Aqijuf Max. panel length: 2600 mm Rotation system: double cone Rotation direction: from transverse to long

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement Gusdpfeib D H Rox Aqief - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Godsv Sag Njpfx Aqiouf Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, workpiece weight (max.): 10,000 kg, – Capacity 10 tons – Minimum workpiece diameter 600 mm – Maximum workpiece diameter 3700 mm – Roller diameter 250 mm – Wireless remote control – Digital speed display – Emergency stop – Documentation Guedpfxsv Dbz Ee Aqisf – 400V

Condition: new, workpiece weight (max.): 1,000 kg, – Capacity 1000 kg – Workpiece minimum Ø 50 mm – Workpiece maximum Ø 800 mm Gedpev A Rrksfx Aqieuf – Roller diameter 250 mm – Continuously adjustable speed – Foot pedal – Emergency stop – Documentation – 230V

Condition: new, - Load capacity 5000 kg - Workpiece minimum Ø 250 mm - Workpiece maximum Ø 2300 mm - Roller diameter 250 mm Gjdoqy Nr Hopfx Aqieuf - Wireless remote control - Digital speed display - Emergency stop - Documentation - 400V

Condition: used, MIG / MAG Pulse Inverter Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Gedpsyxy Tbefx Aqiouf Infinitely adjustable output range Open-circuit voltage: approx. 50 volts / approx. 30 volts Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and current - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) 2-stroke, 4-stroke, 4-stroke special and spot welding - Separate 4-roller wire feed unit FRONIUS Type VR 152 with approx. 1.5 m connection hose package - 4 meter hose package NEW, with FRONIUS central connection - external Fronius water cooling unit Type FK 71 - Welding gas pressure reducer NEW - Equipped with 1.2 mm welding wire Required space (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Also suitable for TIG and electrode welding. Accessories for TIG and stick electrode welding are not included in the scope of delivery.

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Adjustable speed on motor. Can run automatically with signal to welder. Can run 1 lap or continuously. Max workpiece length 1600 mm. Can be extended very easily. Transport can be arranged. I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. Gedjhwhnyjpfx Aqiouf I also have welders in different sizes and types.

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Gjdpsg Icfpsfx Aqisuf Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2023, condition: as good as new (ex-display), Technical specifications: - Load capacity: 1500 kg - Tare weight: 300 kg - Insertable workpiece diameter: approx. 50 - 3000 mm - Roller diameter: 250 mm - Roller width: 50 mm - Rotational speed: approx. 100 - 2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control Gjdpfxsd Iuqlo Aqisuf