Used Window Dolly for sale (10,682)

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997 Njdpfx Aheiix Uvs Uswr

Year of construction: 2015, condition: ready for operation (used), A variety of semi-automatic and automatic window production machines is available. 1) Selecta BSS, year of construction: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of construction: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic slot milling machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of construction: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Wood and aluminum punching machine Batimet FOM, year of construction: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of construction: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum miter saw Hoffmann MS-35, year of construction: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Individual sale possible. Nwodpfx Aoucw Tieh Usr

Year of construction: 2012, condition: excellent (used), Ruchser roller conveyor for windows with 90° turning device left/right length 4400mm Electrically driven accumulating rollers with 2 parallel system components pneumatically tiltable from vertical 7° outside to vertical 7° inside. Plant parts 1900 mm high with rubber roller strips. Between the rubber strips stainless steel plates 2 mm deeper for sliding surface clip holders. Inlet and outlet with edge protection rollers up to 3000mm high as rubber rollers. Infeed track 2000 mm, outfeed track 4000mm driven accumulation rollers. Control and operating element mounted on freely adjustable stand. Njdpfx Aolpcc Ish Uswr

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven Njdpfju Ibuwox Ah Uowr -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Nwsdpfxoxp U N No Ah Usr Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Condition: new, functionality: fully functional, first registration: 01/2026, Year of construction: 2025, We offer our robust dolly axle in single-axle or tandem-axle versions. Production is carried out to order, utilizing BPW axles. If a road approval is required, a Wabco braking system will be installed. The following features can be tailored individually to customer requirements: Nwedpfxjxw R A Uj Ah Ujr - Single-axle or tandem-axle design - With road approval or without for shunting operations within company premises - Coupling height - Kingpin diameter 40 mm or 50 mm - Fifth wheel height - Fifth wheel plate fixed or height-adjustable - Tyres: 385/65 R22.5, 385/55 R22.5 or agricultural version - Twin tyres in 17.5" or 19.5" available at extra cost - With height-adjustable air suspension or without - Corrosion protection by painting, galvanization, or both

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Nwedpfow N Nixsx Ah Uer Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Security windows, security enclosures Nwodpfxsb A Ntmo Ah Uor -for: machine tools, grinding machines, machining centers -Frame: made of stainless steel -Dimensions: 798 x 459 mm -Glass thickness: 17 mm -Number: 14 discs available -Price: per piece -Weight: 8 kg/piece

Year of construction: 1983, condition: good (used), Window handle drill Nwodpeirt Ehefx Ah Usr

Condition: good (used), functionality: fully functional, Welding line with logistics (URBAN year 2008 / SOENEN year 2018) URBAN welding line €25,000 Welding line with logistics SOENEN €55,000 Nedpfx Ajv Enw Njh Ujwr

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Nedpfxjxpi Due Ah Uowr Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total width: 1,750 mm, total length: 7,500 mm, total height: 1,700 mm, input voltage: 380 V, overall weight: 3,200 kg, Manufacturer: Boton Condition: New Product Description: The high-quality window patching machine from Boton delivers a precise, fast, and reliable solution for window patching on folding cartons—including challenging designs such as corner windows. Thanks to its well-thought-out construction and modern control system, this machine is ideal for operations that demand the highest standards of quality and efficiency. Features: ✅ Standard and Corner Window Processing Flawless patching even for 'corner windows'—for maximum manufacturing flexibility. Njdpfx Ahowlr Evo Uewr ✅ Precise Positioning Automatic centering system and adjustable adhesive technology ensure consistently high processing quality. ✅ Efficient and Time-Saving High degree of automation for short cycle times and optimal integration into existing production lines. ✅ User-Friendly Controls Intuitive touch-screen control panel—simple adjustment and rapid changeover for different window sizes and types. ✅ Robust Construction Industrial-grade components and durable materials for continuous operation. Technical Specifications Max paper size: 950x780 mm Min paper size: 150x130 mm Paper thickness: 1 - 6 mm Window size (max): 380x300 mm Window size (min): 50x50 mm Speed: 8,000 pcs/h

Condition: new, machine/vehicle number: 8fbda13da8c595f64678f0f82, empty load weight: 2,100 kg, maximum load weight: 11,300 kg, overall weight: 13,400 kg, axle configuration: 2 axles, tire size: 275/70 r 22,5, Further information Chassis central axle trailer Fine-grained steel welded construction Fifth wheel coupling, make of our choice for 2 kingpins. with ball bearing slewing ring, max. 20° stop Support on drawbar and dolly at the front Wheel chocks with holder Steel underride guard Half-shell mudguards Towing device central axle trailer CLG under-coupler drawbar with tested 50 mm towing eyes to the dolly and to the motor vehicle, including drawbar lock on the truck! Axles + suspension Nwodpfxsi Rizxo Ah Ujr BPW disc brake axles Air suspension for Swap Train version Standard Saddle height lowered approx. 1100 mm, saddle height raised approx. 1280 mm, saddle height approx. 1140 mm, Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the motorized trolley, 2 non-interchangeable coupling heads with Wendelflex connecting lines to the trailer EBS, electronic brake system with EBS plug at the front, with connecting cable, EBS Wendelflex connecting lines to the trailer Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering, ECAS, via truck control, Ecas CAN 2 bus required in the truckwithout Ecas CAN 2 bus in the truck, additional operating control required in the truck (not included in the scope of delivery):Electrical system with a pre-assigned cable and a distributor box. Operation with 15-pin socket pin 11 and 15 with 2 x 7-pin socket pin 7 and 5 Note! This version must still be technically tested in conjunction with the trailer, it is likely that the dolly and the trailer can only be raised and lowered together if this is not technically possible, operation is via WABCO eTASC with hold function in lowered position + auto-reset function (no power required from the truck). Additional operation on the vehicle via WABCO eTASC + hold function in lowering position + auto-reset function (no power required from the truck) Vehicle - driving stability system ECAS only possible in conjunction with WABCO EBS. Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Brake release function from truck (via button) on PIN 14 and additionally via button on vehicle next to H & S valve, for releasing the brake when coupled, EBS power supply must be guaranteed! with Can Router Wheels and tires 275/70 R 22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights 2 white LED position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 2 x 7-pin non-interchangeable plugs with helical flex connection cables to the trailer Cable + plug and/or socket for reversing camera system, depending on vehicle type Operating instructions Note! Please note the currently permitted route network! Towing vehicle must be taken to the Triptis factory for approx. 1 week for adjustment of the towing bar! Please note the CLG recommendation as per the appendixThe following is required before acceptance of the order: Submission of all relevant measurements and dimensions as per the Fliegl CLG form (see appendix) The coupling height of the planned trailer must be

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010, Serial number: no template We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Nsdpfx Ahowx Ixlo Uswr

Condition: used, mileage: 483,000 km, power: 353 kW (479.95 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder- Lift &amp, steering axle- Air conditioning- Manual transmission- Trailer with cable winch- Loglift F265Z 2008Suspension: Leaf-air Nwedpfx Ahsv Iixgs Uor

Condition: excellent (used), Year of construction: 1986, Window patch machine Njdpfx Aowb Dqpsh Ujwr Heiber & Schroeder Year 1986 Model WP1

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Nedponl Nqqofx Ah Uswr Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -Dufix: Nr/Var 46616 -Socket: Ø 50 mm Nsdpeb A Np Nsfx Ah Uowr -Weight: 6.8 kg

Condition: new, machine/vehicle number: a0a72d14f9b44bce47bc25ffb, axle configuration: 1 axle, tire size: 11,5/80-15,3 alliance, Further information 40 mm towing eye Support leg with roller Tires: 11.5/80-15.3 Alliance without suspension Drawbar eye to center of saddle plate: 3200 mm Tire load capacity 5800kg at 30km/h + 5,150kg at 40km/h Nedpfx Aji Ri D Toh Uowr Without road approval, for internal use only!

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top Nwedpfx Ahevu Hghs Ujr ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 190 mm -Height: 90 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 9.9 kg Njdpfxjg Uxgfj Ah Uswr

Condition: new, machine/vehicle number: 04c37f0f66a5be61de6ecd7f2, axle configuration: 1 axle, tire size: 11,5/80-15,3, Further information 40 mm drawbar eye Saddle plate: Jost Saddle height approx. 1000 mm Support foot: OMS Tires: 11.5/80-15.3 Alliance without suspension Nodpfx Ahji Riyho Uowr Load capacity tires 5800kg at 30km/h + 5.150kg at 40km/h Without road approval, for internal use only!

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. Nwsdpfx Ajvu Hfqeh Uor > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Nwjdpfx Aeg Uxgish Ujr -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 185 mm -Height: 75 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 5,8 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 195 mm -Height: 100 mm -Socket: Ø 40 mm Nwodog Uxgujpfx Ah Uer -Weight: 9.1 kg