Used Window Frame for sale (19,314)

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Chsdpsvvkmbofx Aflef

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm Csdpfjxwdv Ijx Afljhf > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Csdpjpl D Hxsfx Aflshf Tyop GA 250

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.” Chjdpoxw Ux Hsfx Aflef

Condition: used, Year of construction: 1986, - 2 pneumatic printing cylinders in length - 2 pneumatic pressure cylinders in width Chodpeiim Rnjfx Aflsf - 2 pneumatic workpiece hold-downs - feed belt width: approx. 680 mm - feed belt length: approx. 3.400 mm - clamping area: 680 x 1.400 mm - control panel Machine dimensions: - Length: approx. 3,400 mm - width: approx. 1.700 mm - height: approx. 1.400 mm - Weight: approx. 800 kg

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Chedpet R T Hcsfx Aflof Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Year of construction: 1983, functionality: fully functional, Frame press for sale. Operating voltage: 380V 50Hz Control voltage: 220V 50Hz Chodpfox Ark Djx Afljf

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 ----- Technical Specifications Summary ----- 1. Crosscut saw ----- Pneumatic crosscut saw, against 8-way turret stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for detecting the saw cut: Manual length stop 4100 mm 1. Tenon and slotting spindle ----- Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Csdpjxvtggjfx Aflohf Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle - synchronous and counter-rotating spindle ----- Position: vertical right Number of tools: 1 Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 Spindle speed: 6000 rpm Spindle diameter: 40 mm Maximum tool radius: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bead saw (horizontal-vertical) Cycled ----- Position: horizontal, top Number of tools: 1 Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial cycle, 2 positions Radial cycle, 2 positions Other features ----- Flanging device for tear-free flanging Double parts package Return device for 1-person operation at working height: Swivel bath Screen control, 99 programs Sloped window device Electronic angle display for sloped windows INCLUDING window tools OPPOLD, year of manufacture 2013: Oppold IV 68/78/92 Wood Oppold IV 68/78 Wood-Aluminum Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: good (used), Code: 0160 Brand: SMC Model: REGO 92 CP Automatic oleodynamic clamp press with movable crossbar for wooden frames, sashes, doors, frames and various - CE Standard Technical data: Useful working dimensions mm 3000 x 2000 N° 2 horizontal cylinders N° 2 vertical cylinders Motor Kw 3 N° 2 crossbar support positions Chedpfxswx Ru As Aflsf Push-button control panel Safety photocells Overall dimensions mm 3600 x 1300 x 2800 h Weight kg 1850

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Chjdpfx Aewkba Hjflof Availability: short-term Storage location: Röllbach

Condition: good (used), For fully automatic assembly of frame parts. Codpfxodhdg Is Afljhf Outer frame dimensions: min. 120 x 120 mm max. 700 x 2.500 mm

Condition: good (used), Gold / Stehle / Fantacci / Leitz house window - tool Chodpfx Ajixtudoflef used different type, on request

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,900 kg, total length: 6,200 mm, total width: 1,200 mm, total height: 2,300 mm, motor manufacturer: Bitzer, power: 240 kW (326.31 HP), New Advansor Cubig 2 4x4 installation. Central CO2 refrigeration and freezing system. Equipped with Bitzer compressors and Alfa Laval plate heat exchanger for heat recovery. Cooling capacity: 105 kW at -8°C Freezing capacity: 90 kW at -48°C Complete set including condensers (gas coolers) and an additional plate heat exchanger for heat recovery. Fully pre-wired control panel with Danfoss control equipment. Eco gas cooler and Alfa Laval plate heat exchanger. Cjdpfx Aow R U Nmsfljhf Top brand – Danish quality. Including documentation, diagrams, and accessories.

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Total height: 1,100 mm Heating/Cooling: available Top: open with loose lid Stand type: frame Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304) Chjdexqduqopfx Afljf

Condition: good (used), NNP IBC tilting frame Chedeqqhqnepfx Aflsf Stainless, IBC Tilting frame, pneumatic lifting, for discharge

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Chedpfx Asw I Uy Tjflof Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Year of construction: 2000, condition: used, To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails Cedpfed H Irfox Afljhf

Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Unirex 3000 machining center Univar 15 Chedpfxjh H Iyxj Afljf Unitex 15

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Codpfx Afslni Uqeljhf

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; total height incl. agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/Cooling: present Power: 5 / 15 kW Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: beam agitator Cedpfx Afjxqavdelshf Support type: ring Location: Bremen Technical documentation: Drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in the top head Outlet (alternative entry): 105 mm Remark: Motor missing, manway cover plated MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel AGITATOR Agitator arrangement: centrally in top head Agitator equipment: Agitator type: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 14 mm

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop ----- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Max. tool travel circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (straight and counter-rotating) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool travel circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool travel: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-parted muntins) Muntin guide consisting of: Muntin support bar from above in the area of ??the profile milling unit vertically on the right and the profiling spindle. Cedpfxoxtvgke Aflehf Item 5: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Tool travel radius max. 130 mm > Axial adjustment range: 30 mm, 2 positions > Radial adjustment range: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions via pneumatic turret > Radial adjustment range: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool travel radius Max.: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamp > Rebating device for tear-free rebating > Double parts package > Return conveyor for one-person operation: swivel belt > Screen control > Sloped window device > Electronic angle display for sloped windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Slotting spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Top grooving device 80 mm Fitting spindle 120 mm ----- Pr...

Year of construction: 2014, condition: used, PROLOGIC window construction software FenOffice 14 Conturex Chjdpfx Aerci S Sjflof

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal vessel with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3,400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220°C Max. allowable operating pressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable/openable top cover Codpfxexqau Tj Aflshf Agitator: Paddle agitator Base type: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Last application: Chemical VESSEL Max. vessel operating temperature / °C: 200°C HEATING/COOLING JACKET Max. allowed operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top cover Outlet (alternative entry): 100 mm Note: Motor missing, manway cover missing MATERIAL SPECIFICATION Temperer system material: V4A 1.4571 (AISI316) Flange material: Steel AGITATOR Agitator manufacturer: Ekato Agitator equipment: Agitator type: Paddle frame agitator; Agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top cover wall thickness: 14 mm

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG Cjdjiix Uvepfx Aflohf automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997

Condition: used, Year of construction: 1994, Frame press Schafberger & Sprödhuber Type Super Csdpfeilurnsx Aflohf 4 Kw 3 m x 6 m