Used Wire Stitcher for sale (3,101)

Year of construction: 2023, condition: new, Cable stripping maschine ,wire stripper Technical Data: Dimensions: W / H / D 75 cm / 68 cm / 86 cm Ksdsk Ra Tujpfx Ab Nonc Weight: app. 95 Kg Color: blue / yellow Cutting speed: app. 48 Meter per Minute Engine: 230V / 3000 W

Condition: excellent (used), Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg Kedpscbkkasfx Ab Nenc -Number: 1x package available -Weight complete: 15.6 kg

Year of construction: 1962, condition: good (used), machine/vehicle number: 364, Max. pressure at 4.2 l/min: 550 - 570 bar Capacity approx.: 30 l Hydraulic motor: 220/380 V, 1400 rpm, 4 kW Kedpfx Absb Nuugo Nenc Straight-cutting machine, type GS 22 Cutting range at 140 kg tensile strength: 6 - 12 mm Ø Cutting rate approx.: 8 - 12 /min Straightening device, type RK 26 For straightening strip steel and round stock with a tensile strength of: 26 - 50 kg Weight approx.: 10 kg Space requirement: 1200 x 900 x 850 mm Total weight approx.: 130 kg

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm Knedpodx Ryyofx Ab Noc coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm Knjdpfx Absi A I Hfe Njc U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm Knjdpfeuhxqmex Ab Nsc nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Kedpeq R N Tmefx Ab Nenc Stepless control with inverter and radio with belly console optionally available!

Condition: excellent (used), Mesh Gratings / Shelf Panels for Pallet Racks for 180, 270, and 360 cm Bay Widths Specifications: Material finish: hot-dip galvanized Overall width: approx. 1,340 mm (crossbar direction) Overall depth: approx. 1,080 mm (load bar direction) Suitable for frame depth: 1,100 mm Clear support span: approx. 990 mm Beam support: approx. 50 mm Kodpfsp Duf Nox Ab Njnc Mesh size: approx. 33 x 66 mm Load bar height: 30 mm or Material finish: hot-dip galvanized Overall width: approx. 1,330 mm (crossbar direction) Overall depth: approx. 1,040 mm (load bar direction) Suitable for frame depth: 1,050 mm Clear support span: approx. 940 mm Beam support: approx. 50 mm Mesh size: approx. 45 x 70 mm Load bar height: 30 mm We stock mesh gratings for the following rack depths: 1 m, 1.05 m, 1.1 m or 1.2 m This mesh grating is the perfect solution to optimize your racking and provides excellent support for your storage requirements. Price on request – Get professional advice! Looking for additional shelf panels or mesh gratings in other versions? No problem! Our team will be happy to help you design a customized racking solution tailored to your individual requirements. Do you have a rack you wish to sell? Simply send us photos and measurements, and we will provide you with a fair offer. Contact us: BLB GmbH – Contact person: Mr. Dominik Blum Tel. Take advantage of our delivery service directly to your site! If you have any questions, please do not hesitate to contact us – we look forward to your call or message!

Condition: used, Year of construction: 2004, Technical details: Kjdpeuzbaysfx Ab Njnc table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: new, mileage: 150 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,200 kg, color: black, gearing type: automatic, number of seats: 3, total length: 7,880 mm, total width: 2,314 mm, total height: 2,930 mm, loading space length: 5,220 mm, loading space width: 2,200 mm, loading space height: 908 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, IVECO truck for transporting machinery with a platform body (aluminum) BASIC DATA / STANDARD EQUIPMENT ? Axle configuration: 2 axles, rear-wheel drive ? Vehicle variant: Standard ? Chassis with cab ? Rear axle suspension: Air suspension ? Front axle suspension: Quadro-Tor torsion bar suspension ? Transmission: HI-MATIC 8-speed automatic transmission ? Rear axle: Twin tires on the rear axle ? Steering: Left-hand drive ? Engine: 3.0L DEVIe 129 kW (176 hp) ? Wheelbase: 4,350 mm ? Permissible total weight: 7.2 t SEATING ? Seatbelt pretensioner for passenger side ? Safety belts with warning signal for driver and passenger ? Safety belts in standard color ? Seat covers in fabric ? Luxury seat for driver with armrest and lumbar support ? Adjustable in height, inclination and length ? Hydraulically sprung, heated ? Seat heating ELECTRICS / LIGHTING ? AIR PRO controls in the cab ? Body manufacturer interface ? Connectivity Box 4 GW provides you with free use of the digital service "Smart Pack" for a period of five years. A prerequisite for this is that you agree to the validity of the applicable General Terms and Conditions for the use of the telematics service and for the collection and use of your data. The telematics is already integrated into the vehicle and will be activated if you agree. ? Digital EG tachograph 4.1 ? Manual remote control ? Light and rain sensor ? Windshield wipers, standard halogen version ? Daytime running lights ? Trailer socket 12 Volt, 13-pole ? Battery 12 Volt 105 Ah / 950 Amps ? Switch in the dashboard for lighting in the body ? Additional, programmable CAB EXTERIOR ? Turn assist for passenger side (BSI) ? Electrically adjustable and heated exterior mirrors ? Daily MY 2024 ? Rear window in cab ? Lane departure warning system LDWS ? Monitors the lane position and provides visual and acoustic signals when leaving the lane ? Vehicle width 2,000 mm ? Iveco badge, chrome ? Black grille ? Advanced Emergency Braking System (AEBS) with City Brake ? Windshield wipers without high-pressure cleaning system (TPMS) ? Tinted windows ? Side vehicle lettering ? Mirror for body width 2,350 mm ? Fuel filler in B-pillar, lockable ? Type plate Daily ? Front obstacle detection (MOIS) ? Additional vehicle key with remote control ? Rear view camera ? Blind spot radar behind cab CAB INTERIOR / AUDIO ? CoC confirms VWTA approval ? Electric windows for front doors ? Front airbags for driver and passenger with seatbelt pretensioner Kodpfx Asz Rh D Iob Njnc ? Speed limiter 90 km/h ? Grab handle on A-pillar for driver and passenger ? Left-hand drive for right-hand traffic ? Driver drowsiness detection system (Driver Drowsiness Attention Warning) ? Rear wall insulation ? Wheel chock, 2 pieces ? Traffic sign recognition with intelligent speed assistant (ISA) ? Portable warning flasher ? Warning triangle, design and dimensions according to ECE-27 ? Central locking with remote control ? Leather steering wheel with function buttons for radio, telephone ? Preparation for toll system (OBU), antenna ? Wiring in the dashboard, without receiver ? Speed limiter ? Cruise control, menu navigation CHASSIS ? AdBlue tank 20 liters under cab ? Trailer load 3.3 t ? Tires 225 / 75 R 16 C - tread ? Steel ladder frame ? Parking brake, manual, center ? Fuel tank integrated, 90 l capacity

Condition: new, mileage: 150 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,200 kg, loading space length: 5,250 mm, loading space width: 2,200 mm, loading space height: 908 mm, number of seats: 3, Year of construction: 2026, total length: 7,880 mm, total width: 2,314 mm, total height: 2,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, IVECO 70C18HA8/P with Wiese aluminium body, unladen weight 2,940 kg!! BASIC DATA – STANDARD EQUIPMENT SPECIFICATION Axle configuration: 2 axles, rear-wheel drive Vehicle variant: Standard chassis with driver’s cab Rear axle suspension: Air suspension Front axle suspension: Quadro-torsion bar suspension Transmission: HI-MATIC 8-speed automatic transmission Rear axle: Twin tires on rear axle Steering: Left-hand drive Engine: 3.0L DEVIe 129kW (176 hp) Wheelbase: 4,350 mm Gross vehicle weight: 7.2 tons SEATING Seatbelt pre-tensioner on passenger side Seatbelts with warning signal for driver and passenger Standard color seatbelts Fabric seat covers ELECTRICS/LIGHTING AIR PRO controls in cab Body manufacturer interface Connectivity Box 4 GW also provides free use of the 'Smart Pack' digital service for five years, provided you accept the applicable terms and data usage policy. Telematics system is pre-installed and activated upon consent. EU digital tachograph 4.1 Manual remote control Light and rain sensor Standard front wipers Halogen daytime running lights EXTERIOR OF DRIVER’S CAB Passenger-side turn assist (BSI) Electrically adjustable and heated door mirrors Daily MY 2024 Rear cab wall window Lane Departure Warning System (LDWS) Monitors lane position and provides visual and audible signals upon lane departure Vehicle width: 2,000 mm Iveco badge chrome Black grille Emergency brake assist AEBS with city brake Wipers without high-pressure cleaning system (TPMS) Tinted windows Side vehicle designation Mirrors for body width 2,350 mm Lockable fuel filler cap on B-pillar Daily type plate Forefield monitoring (MOIS) Interior/exterior audio system Cocü confirmed with consent VWTA Electric windows for front doors Front airbags for driver and passenger with pre-tensioner Speed limiter: 90 km/h Grab handle on A-pillar for driver and passenger Left-hand drive for right-hand traffic Driver drowsiness attention warning Rear wall insulation 2 wheel chocks Traffic sign recognition with intelligent speed assistant (ISA) Portable warning beacon Warning triangle compliant with ECE-27 directive DRIVER’S CABIN / AUDIO Central locking with remote control CHASSIS 20-liter AdBlue tank under cab Towing capacity: 3.3 tons Tyres: 225/75 R 16 C profile Steel ladder frame Manual central parking brake Integrated 90l fuel tank Adaptive rear air suspension Spare wheel matching chassis tyres Spare wheel carrier under frame overhang Steel wheels Standard front axle suspension Engine/Transmission/Axles Emissions standard: EURO VI Exhaust pipe centrally under vehicle HI-MATIC 8HP automatic torque converter transmission Heated fuel filter EDC-controlled diesel particulate filter Knjdpfx Ajz Rh D Uob Nec Homologated for goods transport Comfort noise insulation Remote start brake control Aluminium radiator Crankcase vent heated Engine speed: 3,500 rpm SEATING Luxury driver’s seat with armrest and lumbar support, height, tilt, and longitudinal adjustment, hydraulically suspended and heated Speed limiter Cruise control with menu navigation Dashboard wiring

Condition: used, mileage: 195,975 km, power: 265 kW (360.30 HP), first registration: 12/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2024, color: green, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, all wheel drive, * Sun visor * ABS * ASR * Radio * On-board computer * Cruise control * Hill start assist * Electric window lifter * Electric adjustable mirror * Heated mirror * Central locking * Roof hatch * Rear window * Longitudinal and transverse locks * HydroDrive front axle drive * AP axles * Orange rotating beacon * Top air intake * Trailer coupling * 2-wire air connection * Hydraulic connection for trailer * Predictive Powertrain Control * Driver's air seat * Off-road driving program * Exhaust behind the driver's cab * Foldable underrun protection * 12-speed * Suspension: leaf-air * Payload: 13672 * Continuous brake: engine brake ----Construction: Meiller 3-sided steel, raised bulkhead with excavator protection, spring-loaded side wall on the left (swinging + foldable), lashing eyes, roll-up tarpaulin. Ksdpfxsvzva Ds Ab Nsnc Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORTS !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions (see imprint).

Condition: used, Year of construction: 2008, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. Kjdpfx Ajz Nw Nkjb Nonc This StitchLiner 5500 includes the following components: - 1x VAC-100a, 1x VAC-100c Collators - 1x ST-40 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: - 20 stations - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time Kodjdx R Tfjpfx Ab Njnc - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Knsdpjy Hpamsfx Ab Noc

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) Kjdoz N Hxhjpfx Ab Nonc - Operating manual (PDF)

Condition: ready for operation (used), Year of construction: 2021, arm reach: 2,010 mm, total width: 4,000 mm, load capacity: 10 kg, overall weight: 8,000 kg, product length (max.): 5,200 mm, number of axes: 6, Welding robot manufactured in 2021. This Yaskawa Robotic Welding Cell RWC L1_OS 15330 features a robust configuration with multiple Yaskawa Motoman robots and advanced welding equipment. It includes a maximum reach of 2,010 mm and a payload capacity of 10 kg. If you are looking to get high-quality welding capabilities, consider the Yaskawa Robotic Welding Cell RWC L1_OS 15330 we have for sale. Contact us for further details. • Power supply: 400 V / 50 Hz • Rated power: 70 kVA • Main fuses: 3 × 100 A • Compressed air supply: 6 bar Additional equipment • Robots: • 2× Yaskawa Motoman MA2010 (6 axes; max. reach 2,010 mm; payload 10 kg; repeatability ±0.08 mm) • 2× Yaskawa Motoman MA1440 (6 axes; max. reach 1,440 mm; payload 6 kg; repeatability ±0.08 mm) • Robot controller: • Yaskawa DX200 multi-robot controller • Positioner: • Yaskawa RWV2-M2-1500-2500-1850 (max. payload 1,500 kg; distance between mounting plates 2,500 mm; swing diameter 1,850 mm; 3 external robot axes; weight approx. 3,400 kg) • Welding equipment: • 4× Fronius TPS400i welding power sources • 4× Fronius WF 25i wire feeders • 4× Fronius CU 1400 cooling units • 4× Fronius welding torches Kjdpjz N Hrbefx Ab Nonc • 3× Abicor Binzel automatic torch cleaning units • 3× Q-Set automatic torch calibration systems

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Knodpoznli Dsfx Ab Noc Manufacturer: MANZ PLC control, touch screen display, Siemens

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm Product Description The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Maximum workpiece height of 400 mm Maximum workpiece weight of 300 kg Stable 1,400 kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Knjdeznttdopfx Ab Nsc Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available Estimated delivery time: approximately 90 working days Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. Why Choose the Digima DK7732? The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 220 mm Travel U/V-axis: 120 mm Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Knedpfx Aboy Emxqs Njc Operating hours: 28,500 h Machine weight: 2,700 kg

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Knedpoza U Nlofx Ab Noc Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Year of construction: 2003, operating hours: 34,621 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 34621 Std Verfahrwege X 350 mm Y 220 mm Knodpjzkhltefx Ab Nec Z 220 mm U 350 mm V 220 mm Year 2003

Condition: ready for operation (used), Year of construction: 2024, load capacity: 20 kg, arm reach: 3,000 mm, number of axes: 6, This 6-axis OTC Daihen FD19-V25L robot arm was manufactured in 2024. It is designed for versatility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the OTC Daihen FD19-V25L robot arm we have for sale. Contact us for further details. • Robot model: MEGAWELD-V25L • Robot module: MEGAWELD-V25L robot module • Robot controller: Included • Teach pendant: Included; 15 m cable Additional equipment • External axis: 1-axis kit, 4.5 kW • External-axis servo motor: AC servo, 2.0 kW • External-axis cable: 20 m • Robot monitoring: Robot Monitoring Unit • Fieldbus: PROFINET board • Multi-axis software: Multi Synchromotion (up to 4 mechanisms) • Laser sensor: HD19-QF laser search • Sensor head: HD19-QF • Sensor controller: HD19-QF, 10 m • Shock sensor: Included • Welding system: WPS, type P403 • Cooling: Water-cooling unit • Welding torch: 500 A, 45°, water-cooled, Fe/SUS • Wire feeder: 4R wire feeder • Pneumatic cleaning station: WRS-SC22XA SE • Transformer: 7 kVA • Control voltage/system: CE kit / transformer case & noise filterThe robot and welding quipment is brand new. Newer installed. We have 3 identical units for sale. Knsdjz I S I Depfx Ab Nec

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 Knedpfez E U D Njx Ab Njc - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives - Pallet conveyors below the winder, included in the sale - Operating manual, wiring diagrams and further technical documentation Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability Kedez D Aw Uopfx Ab Njnc From 16 October 2026. Location: Germany.