Used Wire Straightening Machine for sale (93,086)

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2015 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): ±40 mm Max. taper: 3° at 80 mm height Includes F-Module, suitable for wire diameters from 0.02 mm to 0.2 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Hnjdpfx Agexfvfwe Nsu Includes AGIEJOGGER hand box for convenient machine setup 15” LCD color display with lifting keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg The machine will be cleaned, completely overhauled, and thoroughly tested by our specialist technicians. We are happy to install the machine at your site and provide training for both control system operation and machine handling.

Condition: good (used), Year of construction: 2008, operating hours: 16,000 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Work tank dimensions W x D: 1,264 x 973 mm Max. workpiece weight: 1,500 kg Hnjdpfx Aexg Il Sog Nsu Distance floor to table surface: 1,000 mm Machine dimensions W x D x H: 2,100 x 2,800 x 2,350 mm Machine weight: 5,300 kg Travel of U and V axes: 770 x 520 mm

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Hnodpsrqfxwofx Ag Neu

Condition: used, Clamping plate, machine table with T-slots made of steel Clamping table Clamping plate, clamping table, machine table HOMEMADE can also be used as a straightening plate or welding table Table surface: 2150 x 1040 mm Construction height: 200 mm - Top and bottom sides machined in parallel, surfaces planed - Table plate L x W x H = 2150 x 1040 x 65 mm - Table plate provided with several symmetrical bores Table plate with M16 and M24 threaded holes, M16, M24, M16, M24, etc. Bore spacing lengthwise: approx. 250 mm Bore spacing crosswise: approx. 255 / 165 / 255 mm - 6 pieces double T-beams welded onto the steel plate Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Clearance between double T-beams: 50 to 55 mm Weight: 1730 kg Hsdotqgnyjpfx Ag Njnu Good condition

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Hnodpfxewtd Edo Ag Nju

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories More pictures and data will follow shortly. Hsdpfxewt N Uqj Ag Nonu

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Hsdpfx Aouuz Iijg Nenu Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Hsdjxiyx Nspfx Ag Njnu

Condition: used, Year of construction: 2004, Travel path: Hnsdpsw Emfdefx Ag Nou X 500 mm Y 350 mm Z 300 mm incl. cooler incl. large wire spools

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Hodpfxexnx Ito Ag Nonu Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Hnedpfx Aoxn Uyxjg Nsu Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: 1 x Xerox Versant 3100 with the following equipment: Hnsdpjvf Hhyefx Ag Nju incl. Fiery Server EX3100 incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ITALMEC TBNS/9 Wet Drawing Line 2022 - 25 m/s, Copper Bath, Near-New, Slippage-Free Description: ITALMEC TBNS/9 WET DRAWING LINE - High-performance wire drawing machine for copper and alloy. This premium unit is offered as part of a two-line package sale. Year of Manufacture: 2022. Commissioned: 2023. Condition: Near-New (Only 20 tons of test operation completed). Detailed Technical Specifications: ● Machine Type: Multiple Wire Drawing Machine (Wet). ● Technology: New Generation Slippage-Free (Independent motor on each capstan). ● Max. Operating Speed: Up to 25 meters/second (m/s). ● Max. Inlet Wire Diameter: 3.5 mm (specific to wet drawing). ● Drawing Process: Designed for high cross-sectional reduction. ● Control System: AC Siemens Electrical Cabinet and integrated drives. ● Unique Feature: Factory-integrated COOPER BATH (Miedziująca Wanna) included. Commercial & Logistics Information: Hnsdpfx Ajxm Tq Heg Neu ● Original Purchase Value (This Unit): 160 000 EUR. ● Ancillaries: Complete Line Wiring (approx. 50 000 PLN value) is included in the package price. ● Current Status: Professionally Disassembled and secured, ready for immediate loading (EXW). ● Price: This line is sold as part of a two-line package (TBNS/9 + TBNS/9 Standard). Total package price: 259 000 EUR EXW. Inquiries for a single machine purchase are welcome. This is a rare chance to acquire a 2022-technology wire drawing machine with minimal hours, guaranteeing cutting-edge performance.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading Hnodpfx Aoxf I D Eog Nju can be seen in good working condition year 2002

Condition: used, Year of construction: 2015, x-axis 550 mm y-axis 350 mm z-axis 400 mm U-axis 550 mm Hsdpfx Aexddtmeg Nsnu V-axis 350 mm volume 1200 L inclination +/-30°/400 mm dimensions 1200x700x400 mm weight 1500 kg wire dia. 0,10-0,33 mm Bobbin Weight max. 25 kg

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Hjdpfsgiplvox Ag Nenu Dimensions Length: 5100 mm Width: 1700 mm Height:3100 mm

Year of construction: 2020, operating hours: 4,200 h, condition: ready for operation (used), General Data Measurements width 2680 mm Measurements depth 2790 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-WB Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Workpiece weight 1000 kg Media Power consumption 13 kVA Hnedsxbihwspfx Ag Nsu Air pressure 0.5 – 0.7 MPa Additional Equipment Automatic Front Door Option 45° Die Guide: Max Taper Angle ±45° / 70 mm 30 kg Wire Feed Unit: Max Wire Weight 30 kg This 5-axis FANUC Robocut alpha iB600 wire EDM machine was manufactured in 2020. It features a maximum workpiece size of 1050 × 820 × 300 mm and can handle weights up to 1000 kg. The machine includes UV axis travel of 200 × 200 mm and a maximum taper angle of ±30°. Equipped with a FANUC 31i-WB controller, it offers precise control and efficient operation. If you are looking to get high-quality EDM capabilities, consider the FANUC Robocut alpha iB600 machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Hnedpowqgh Asfx Ag Nju Magnetic chuck 350 x 250mm

Condition: good (used), workpiece weight (max.): 800 kg, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 160 mm, ★ EXCEPTIONALLY well-maintained machine from the liquidation of a renowned toolmaker – please also see our other listings ★ ❗Wire EDM Machine GF AGIE CHARMILLES ROBOFIL FI 6050 TW❗ Year of manufacture: 2005 / 2008 Machine number: 136005 Condition: Used, untested Delivery terms: Free loaded on truck (FCA) – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – The machines must be collected by the buyer in week 49 / 2025 as scheduled. The exact date will be specified by us. Earlier availability may be possible by arrangement. Payment terms: Advance payment by bank transfer Internal ref.: JO3 Available for inspection under power: YES – by appointment Technical data: Max. workpiece dimensions: 1260 x 690 x 360 mm Max. table load: 800 kg Travel (X / Y / Z): 630 / 400 / 160 mm Travel (U / V): +48 mm Measuring resolution: 0.5 μm Manual rapid traverse: 15 mm/s Wire feed speed: Adjustable from 2 – 15 m/min Taper angle adjustable from 0° to 30° Work tank dimensions: 1420 x 770 x 420 mm Max. discharge current: 45 A Operating hours approx.: 33,568 !!! Cutting hours approx.: 3,660 !!! Since the machine is currently connected to a central cooling system, the buyer may need to provide a separate chiller. Further technical details are available upon request. Scope of delivery: Manuals Accessories & spare parts as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 3000 x 2700 x 2500 mm Weight approx.: 4,000 kg If you have any questions or wish to arrange a viewing, please feel free to contact us: ⚠️Also see our other listings⚠️ Additional information: Hnjdpfx Ajxg Rf Ujg Nsu We strongly recommend collection via direct transport (freight carrier) The goods are sold under exclusion of any warranty Technical data subject to change Sale subject to prior sale ❗Sale to business customers only❗

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,500 kg, Travels 5-axis: - X-axis travel: 600 mm - Y-axis travel: 400 mm - Z-axis travel: 310 mm - V-axis travel: 150 mm - U-axis travel: 150 mm Workpiece weight: 1,500 kg Cooling system with temperature control Generator: transistor pulse generator Control system: MITSUBISHI M700 control unit with 3D CAD/CAM software Hodpfx Agoxg Hnfs Nenu 10 GB RAM 15-inch touchscreen Clear display of main functions on screen Programming using the ESPERADVANCE dialog system Control is prepared for receiving 3D files Graphical inspection: 3D, front view, side view, top view Handheld control device Ethernet TCP-IP and 2 USB ports Prepared for remote communication (mcAnywhere) Availability upon consultation

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Hjdsxbzimspfx Ag Nenu Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport - Warranty - Cooling unit

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM Hjdpjwr Utiofx Ag Nonu The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 1200 kg Control Unit Hnodexf N Rmepfx Ag Neu Brand FANUC Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Y-Axis Movement 220 mm Z-Axis Movement 255 mm V-Axis Movement 120 mm U-Axis Movement 120 mm This 5-axis FANUC Robocut alpha-0iC was manufactured in 2006. It features X-axis movement of 320 mm, Y-axis of 220 mm, and Z-axis of 255 mm. It can handle workpieces up to 500 kg and has a machine weight of 1200 kg. Consider the opportunity to buy this FANUC Robocut alpha-0iC wire edm machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2002, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, ★ TOP well-maintained machine from the liquidation of a renowned toolmaker - please also see our other listings ★ ❗ Wire EDM Machine CHARMILLES ROBOFIL 240 ❗ - Year of manufacture: 2002 - Machine number: 920530 - Condition: Used, unchecked - Delivery terms: Free loaded on truck – unpacked - Location: 73347 Mühlhausen - Availability: Beginning of December 2025 – The items must be collected by the buyer in calendar week 49 of 2025. The exact date will be specified by us. Earlier availability may be possible by arrangement. - Payment terms: Advance payment by bank transfer - Internal reference no.: JO2 - Can be inspected under power: YES – by arrangement Technical data: - Maximum workpiece dimensions: 1000 x 550 x 220 mm - Maximum workpiece weight: 750 kg - Table dimensions: 680 x 450 mm - Total dielectric volume: 760 L - Travel X / Y / Z: 350 / 220 / 220 mm - Travel U / V: 350 / 220 mm - Maximum taper angle: ± 30° / 220 mm - Total generator hours approx.: 16,675 - Since the machine is currently connected to a central cooling system, the buyer will need a separate chiller. - Further technical details available on request Scope of delivery: - Manuals - Various accessories and spare parts as per images Dimensions & weights: - Installation dimensions L x W x H approx.: 2000 x 2000 x 2100 mm Hodpfxoxg N Axe Ag Nonu - Weight approx.: 2,500 kg ⚠️ Please also see our additional listings ⚠️ Additional notes: ► Direct pick-up (by forwarding agent) is expressly recommended ► The goods are sold excluding any warranty ► Technical data provided without obligation ► Subject to prior sale ❗ Sale only to entrepreneurs ❗

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 3000 kg Control Unit Brand FANUC Main Drive Number of axis 5 Hjdpfx Asxf N Rtsg Nsnu Movement X-Axis Movement 550 mm Y-Axis Movement 370 mm Z-Axis Movement 310 mm V-Axis Movement ±60 mm U-Axis Movement ±60 mm Workpiece Workpiece weight 1000 kg This 5-axis FANUC ROBOCUT alpha-1iC wire EDM machine was manufactured in 2006. It features X-axis movement of 550 mm, Y-axis movement of 370 mm, and Z-axis movement of 310 mm. It can handle workpieces up to 1000 kg and has a machine weight of 3000 kg. Consider the opportunity to buy this FANUC ROBOCUT alpha-1iC wire EDM machine. Contact us for more information about this machine. Application Types EDM