Used Wmw Dlz 355 for sale (482)

Condition: good (used), Year of construction: 1988, Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum turning diameter over compound slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Dwjdjz Hylbspfx Al Sec Speed range: 56...2,800 rpm.

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Technical data: Spindle speeds: 90 - 710 rpm (7 steps) Thread sizes: M6 - M30 Dsdpfjzzz E Iox Al Sjwc Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter): 2-20 mm Overhang: 210 mm Drilling stroke: 100 mm Distance spindle/table max.: 450 mm Speed range: 355 – 710 – 1400 - 2800 rpm Dsdpsz H T Dkefx Al Sswc Spindle taper: MK2 Table clamping surface: 340x280 mm Total power requirement: 1.1 kW Machine weight approx.: 165 kg

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 Dsdpoz H Tn Aefx Al Sowc (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: used, functionality: fully functional, Used radial drill 40x1250 WMW overhauled according to standards. Dwjdpozky Imefx Al Soc

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dsdpfozrxr Tjx Al Sowc

Condition: used, Year of construction: 2010, table length 2000 mm Dwjdjztrvnjpfx Al Soc table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: good (used), functionality: fully functional, Facing and centering machine FZWD 160. Dwsdpfx Aoz E Aw Dsl Sec

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 Dwjdpezwc Sbofx Al Sec - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Dodpfsz Iyy Ijx Al Sowc Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Dedpfx Ajz Iy Tusl Sewc Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Dedpfx Aevytw Djl Sewc Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm Dwjdpfxoz Iy T Ij Al Soc number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), WMW HECKERT BR 40/2 x 1250 radial drilling machine - Arm length: 1250mm - Maximum drilling diameter: 40mm - Morse taper: MK5 - Minimum speed: 20 RPM - Maximum speed: 1200 RPM Dwodpjzury Njfx Al Sec - 3-speed gearbox with variable speed control - Dimensions of drilling head: (L x W x H) 710 x 710 x 500mm - Weight: 3000KG - Automatic feed - Dimensions (L x W x H): 2100 x 1000 x 2900mm

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Diameter of the clamping table: 1800 mm Total weight: 38 tons Dwjdpfxjz Df A Te Al Sec The clamping table has been disassembled and overhauled.

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Dwjdpfxoz Euuzs Al Sjc Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Dsdpfxez Iyyzj Al Sswc Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; Dodpfx Asz Izgiol Sewc external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Dwedpfx Aewya A Ssl Ssc Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Dwjdpfx Aloz Hi Rgo Ssc Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Weight of machine approx.: 250 ton Standard configuration LINK DRIVE

Condition: good (used), Bench drill, pillar drill, column drill, column drill Dwsdpfx Aoxm Rzisl Soc -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Long thread and spline milling machine, also for gear hobbing. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Milling length (Z-axis): 800 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Dedpjzxqbyofx Al Sowc Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,400 kg

Condition: good (used), Year of construction: 1990, Offer 26188 Technical data: - Brush diameter, each, up to approx. 120 mm - Brush width, each, up to approx. 90 mm - Shaft diameter, each, 20 mm - Manual height adjustment of the top brush via handwheel Djdoz Hk Imspfx Al Sswc - Drive per motor: 400 V / 2.5 kW - Space requirement: approx. W 650 x H 1150 x D 450 mm - Weight: approx. 80 kg

Condition: used, Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible. Dsdpjzwpg Eefx Al Sowc

Condition: excellent (used), max. wheel diameter 250 mm gear width 40 mm max. module 6 min. module 1 number of teeth 8 - 100 cone distance 310 mm Dwjdpfez Dbzrsx Al Sec pressure angle 15 - 30 ° blade cutter head diameter 450 mm pivoting angle 0 - 90 Grad total power requirement 16 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 2,2 x 1,7 x 1,7 m Change gears, chip conveyor, cutting heads, knifes,...