Used Wolfcraft Cross Table for sale (20,179)

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm Cpedpfxjxpxrbe Aa Njw The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Csdpsgp Dymjfx Aa Nopw Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Cpsdpfod Iincsx Aa New Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Codpofrzt Asfx Aa Nepw Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor Csdpfxjfv Aykj Aa Nepw - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Cpedsgxi Ebspfx Aa Now Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: Hole diameter: 28mm Cpsdpfjgp Dyqox Aa Njw The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: good (used), Year of construction: 1994, functionality: fully functional, Forward/reverse operation, 3–1,000 rpm, brake motor with Haffner 3-roller feed, 8 speeds, good condition. Transport available at additional cost! Cpedsybv A Ajpfx Aa New

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Cpsdeif Rlbjpfx Aa New Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Cpodpfx Aaofk R Tde Njw Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: good (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping surface: 1400 mm x 1400 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm Condition: Very good (used) Cjdpfefr Ih Dox Aa Nspw Optionally with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Cpedpfx Aepk Iv Uja Now Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm Cpodji Hg Iyjpfx Aa Now turning speeds 2 - 20 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 18 Kg dimensions of the machine ca. 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: new, table length 1000 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery Cpjdpfx Aeh Dqb Isa Now

Condition: new, table length 900 mm Cedpfxoupxmfo Aa Njpw table width 600 mm table height 700 mm weight of the machine ca. 90 Kg dimensions 0,9 x 0,6 x 0,7 m

Condition: new, number 33 Positionen weight 52 kg condition neu 28 mm Set 1: 33 pieces, 28mm system, consisting of: Clamps: 4 x 280610.N Clamps: 2 x 280630.N Prism: 2 x 280648.1.N Bolt: 12 x 160511 Cpsdpfx Aajfh N Eke Now Stop: 4 x 280410.N Stop: 4 x 280420.N Angle: 2 x 160110.N Angle: 2 x 280152.N Accessory set. 1 x 283999 Price plus packaging and transport.

Condition: new, number 37 Positionen 28 mm condition neu weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Cpodpegazl Rsfx Aa New Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 840 - 890 mm weight of the machine ca. 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Cjdpfx Ajih D Apja Njpw Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: good (used), Year of construction: 1986, CNC Table-type Boring Mill Manufacturer: TOS VARNSDORF Model: WH 10 NC Year: 1986 with Heidenhain TNC 135 control. Cpedpfx Aoyk Tltsa Nsw Spindle diameter: 100 mm Spindle taper: SK50 Spindle speeds: Motor 20 kW Spindle travel: 630 mm Travel paths: X 1250 mm, Y 1100 mm, Z 950 mm Table size: 1000 x 1120 mm, load capacity 3000 kg Weight: 12,800 kg Equipped with coolant system, machine documentation available. Machine not under power.

Condition: used, functionality: fully functional, F 90 panel saw, non-tilting, Cpodpfx Aajyaq Ahs Now table extension, table length approx. 3000 mm top extraction, sliding carriage length 3000 mm, scorer, 1000 mm to the right of the blade, saw blade diameter 400 mm, max. cutting height 130 mm weight 900 kg Price ex-works Transport available at extra cost!

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm Cpsdpox Url Usfx Aa New - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: used, Year of construction: 2013, machine/vehicle number: 13051888-1/012 Art.-Nr. 6153100, Technical data: - Manufacturer: Unikraft - Type: SHT 1001 G Cpodpfx Aowxtwyja Nsw - Year of manufacture: 2013 - Platform dimensions: 1450x1130mm - Lifting capacity: 1,000kg - Hydraulic lifting device - Net weight: 250kg - Min. height: 82 mm - Max. lifting height: 760 mm - Duration from 82 to 760 mm Lifting height: 18 s - Motor power: 0.75 kW - Anti-pinch strips - Voltage/Hz: 400/50 - Location: Blomberg warehouse

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: Csdpfxjya H Hio Aa Nopw - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1.750 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Year of construction: 1990, spindle diameter 150 mm x-travel 4000 mm y-travel 3000 mm z-travel 1000 mm w-travel 1500 mm Table area 2000x2000 mm Table load 30 t Feed 3-3500 mm/min Rapid movement 5000 mm/min transmission ratio 2 spindle power 37 kW total power requirement Heidenhain kW voltage 380 V frequency 50 Hz type ITNC mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Cpodpfx Asyqtf Toa Nsw Your Markus Hirsch Team

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut Easy 222 Year of manufacture: 2016 CNC control Usable cutting/table area: 1,000 x 600 mm Maximum cutting height: 20 mm Static vacuum table with single-zone clamping High-performance vacuum turbine, 4 kW output Servo drive for X, Y, and Z axes Safety features with light curtain monitoring and emergency stop switch 1 high-intensity light projector Vacuum power: 4 kW Connected load: 6.5 kW 380 Volts, 3-phase, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool attachments) 9 bar, 400 l/min Software DXF converter for reading and converting CAD files Interactive layout software license Automatic nesting software license CAD software module for easy creation of geometries Multi-tool head, 20 mm cutting height Comprising 5 tools: 1x tool module for all cutting tools 2x punching modules with integrated extraction, punch diameter 1 - 8 mm Ink cartridge for applying markings 1x badge needle 1x laser pointer Cpedpfx Aeyf Euija Nsw Machine dimensions: 1,600 x 1,235 x 2,190 mm Weight: 440 kg Reference no.: 9226