Used Wood Bending Machine for sale (86,747)

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Knodpfx Asx Ii Hveh Uef

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Kjdpfxowm Rqas Ah Uonf Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability Knodjxab E Sjpfx Ah Uef - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Knodjx D Efqopfx Ah Ujf Bending

Condition: like new (used), Year of construction: 2025, Rebar bending machine B 50 Technical data see data sheet Dimensions 1.4x1.3x1.5 meters / Weight 400Kg Kedpfewr Ub Hjx Ah Uonf Errors / input mistakes reserved

Condition: ready for operation (used), A defective press brake Trumpf is available. Press force: 2000kN, bending length: 4080mm, ram stroke: 365mm, table-ram distance: 632mm, max. opening height: 535mm, angular adjustment: +/-10mm, throat depth: 410mm, frame distance: 3680mm, table width: 200mm, working height: 1050mm. Machine dimensions X/Y/Z: approx. 4650mm/2250mm/2900mm, weight: approx. 18000kg. The control board is defective. The machine is equipped with intact bending aids on both sides. Documentation available. On-site inspection is possible. Knsdpfox I Rq Asx Ah Ujf

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Knjdpfjx Iitijx Ah Usf Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° Knedpfx Aeu Ibukoh Uof compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm Ksdpfx Aexaa Sdeh Usnf wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, Three roll round bending machine Binmak 1250x2,5mm Technical data: -Manufacturer: Binmak -Type MR1250x90 -Country of origin: Turkey -Bending up to 2,5-3mmmm -working area approx. 1250x2,5mm -with foot pedal -Electric -Own weight approx. 400Kg -roll diameter: approx. 90mm The machine is also available with hardened rolls for extra charge Knodpfx Ajhqhhrsh Uef The price is net

Condition: good (used), comac Series 3000, Model 303 Heavy-Duty Profile Bending Machine | 3 Driven Rolls The Series 3000 – Model 303 is a powerful and precise profile bending machine designed for demanding industrial bending applications. With its robust construction, three driven rolls, and modular roll system, this machine is suitable for a wide range of profiles, pipes, and tubes. Equipped with a solid 3 kW motor, individually adjustable bending rolls, a free-standing remote control, and both vertical and horizontal operating modes, the 303 offers maximum flexibility and ease of use. The machine complies with the 2006/42/EC Machinery Directive and is built for long-lasting, trouble-free performance. Key features - Compliant with 2006/42/EC safety standards - 3 driven rolls for maximum grip and perfect material feed - Independently adjustable bending rolls for double pre-bending of symmetrical profiles - Lateral guide rolls with three-dimensional adjustment - Modular rolls suitable for most standard profiles - Alloy steel bending rolls, heat treated to 60 HRC - Free-standing safety remote control - Suitable for vertical and horizontal installation Knodex A Iviepfx Ah Uef - One-piece steel frame for extreme stability - Torque limiter on the upper shaft - Shafts and gears mounted on rolling bearings for high dynamic loads - Spline-driven power transmission for optimal force transfer Technical Specifications - Shaft diameter: 50 mm (upper/lower) - Roll diameter: 180 mm - Motor power: 3 kW - Feed speed: 5.5 m/min - Weight: 720 kg Bending Capacities Profile Up to Minimum bending radius 60 × 10 mm – Ø 450 mm 25 × 5 mm – Ø 200 mm 80 × 20 mm – Ø 400 mm 32 × 32 mm – Ø 400 mm Ø 40 – Ø 400 mm Ø 60.3 × 2.9 – Ø 800 mm Ø 20 × 1.5 – Ø 220 mm Ø 48.3 × 4 – Ø 500 mm 60 × 30 × 2.5 – – 50 × 3 – – 60 × 6 – Ø 600 mm 30 × 4 – Ø 350 mm 50 × 5 – Ø 500 mm 30 × 4 – Ø 350 mm 60 × 60 × 7 – Ø 600 mm 50 × 50 × 6 – Ø 600 mm 70 × 70 × 8 – Ø 700 mm 80 × 45 – Ø 500 mm 70 × 40 – Ø 600 mm 80 × 42 – Ø 500 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, bending furnace with molds for sink 380 V 50 HZ KW 60 Usefull size = 2500 x 1200 mm / 98”x47” Knodpfx Ahsx Dtwhj Uof

Condition: used, Year of construction: 1990, pressure ca. 20 t Kedex E Dt Sspfx Ah Uenf

Condition: ready for operation (used), Pressing force: 300 kN/30 t Tool height: 200 mm Stroke length: 0 – 300 mm Kodpfx Ahex Apgco Uenf Bending capacity with prism tool MW 125/240: 200 x 16 / 200 x 24 mm Bending speed: 0 – 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Space requirement: 1250 x 820 x 1120 mm

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Kjdpfxsvtgn Ns Ah Ujnf Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, shaft diameter: 50 mm, bending force (max.): 10 t, travel distance X-axis: 200 mm, shaft length: 200 mm, TECHNICAL DETAILS Maximum torque per roll: max. 2,500 Nm Bending force: 10 t Ksdpfxsxw Sl Re Ah Ujnf X-axis travel: 200 mm Shaft diameter: 50 mm Shaft length: 200 mm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 1,730 mm x 1,600 mm x 1,520 mm Weight: 1,800 kg Transport packages: 2

Condition: new, sheet width 1070 mm plate thickness 4 mm distance between columns 1100 mm diameter of upper rolls 110 mm total power requirement 5,0 KW Kjdpovki E Ssfx Ah Usnf weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,9 x 1,1 mm

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Knedpjuzlh Iofx Ah Uef

Condition: new, Year of construction: 2025, Take advantage of our Try&Buy offer and test the TruBend 7050 from 149.900€* incl. TRUMPF tool package incl. 90 days right of return *Offer only valid for new customers in Germany. The images shown correspond to extended equipment options and not the standard scope of the offer. Please contact us for details of the offer and further information. About the machine: Ksdpfx Asi Ubhxjh Uonf With the TruBend Series 7000, you can bend small and medium-sized parts highly productively under the best working conditions. Winner of the Ergonomics Award, it takes the strain off your operator while working quickly and safely. You achieve energy savings of up to 74% compared to conventional hydraulic drives and achieve precise results for all applications. See the perfect interaction between man and machine for yourself! Precise and intuitive Control, tool clamping, positioning and angle measurement - every work step supports the path to the perfect result. User-friendly handling and precise design make the machine a compact high performer in your production. Consistently ergonomic If the bender is comfortable, the bending process runs smoothly: the TruBend Series 7000 was the first bending machine to receive an ergonomics certificate. The operator works comfortably with a standing and sitting aid and adjusts the support table individually. The sitting and standing aid as well as the swivel-mounted control protect the spine. LED lighting guarantees optimum visibility in the work area. Further information can be found on our website. TRUMPF quality Our fast remote service support takes care of your concerns anywhere in the world. For further technical data, please refer to the data sheet or visit our website. If you have any questions, please contact us. About TRUMPF: In our 100-year company history, we have been able to help shape many thousands of sheet metal fabrications in Germany alone. We pass this experience on to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market and experts in software, automation and Smart Factory, you will always receive an individual offer that is tailored to your requirements and makes you fit for the future. PS: We are also happy to support you when it comes to financing. With the financing, leasing or pay-per-use models of TRUMPF Financial Services, we are at your side for both financial and business challenges.

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm Ksdpfxsx Anpvo Ah Uenf T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 02263, Offer 25492 Technical Data - Upper and lower rollers driven, each roller hydraulically adjustable - Suitable for prebending and conical rolling, side supports can be swung out - Operation via separate control panel with digital actual value display - Max. working width: 2050 mm - Max. sheet thickness at 400 N/mm² without prebending: 8 mm - Max. sheet thickness at 400 N/mm² with prebending: 6 mm - Bending capacity refers to at least 3 × top roller diameter - Hardened rollers - Top roller diameter: 190 mm - Side roller diameter: 170 mm Kodpfx Ahox H R Rms Uenf - Bottom roller diameter: 140 mm - Drive: 400 V / 3.0 kW - Required space: approx. W 3500 x H 1300 x D 1300 mm - Weight: approx. 3200 kg

Condition: new, Cesurbend Mandrel Tube Bending Machine PBH-32 E Technical Specifications Max. tube diameter (mild steel): 32 mm Max. tube wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Hydraulic motor power (kW): 1.5 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 400 Kedpext Rcgjfx Ah Uenf Features • 4-way adjustable measuring device • 7" touchscreen colour display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control

Condition: new, sheet width 2070 mm plate thickness 4 mm distance between columns 2100 mm diameter of upper rolls 140 mm Knsdpfsfv H A Usx Ah Ujf weight of the machine ca. 0,37 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, total length: 16,800 mm, total width: 6,300 mm, total height: 3,600 mm, working length: 620 mm, Equipment: emergency stop, Fully automatic tube bending and welding machine with solid-state laser Trumpf TruDisk 3002 (6C), for the production of round, oval, polygonal, longitudinally welded tubes. Diameter from 80-400mm, length from 80-620, material thickness 0.8-2.0mm (steel, chrome steel and stainless steel). Further features of the fully automated tube production machine are -Bending station (welding edge bending) Camera-guided welding optics. -seam smoothing to eliminate any height offsets in the weld seam -Annealing" at approx. 500 °C to optimize subsequent expansion or calibration -Extraction system for welding fumes. -Complete maintenance by the manufacturer. Further machine data can be found in the pictures or under Knedju Ut S Ejpfx Ah Ujf the homepage of weil-technology (solutions/machine-systems/ecostar) The machine can be inspected under power at our Schönauer Straße site in 78737 Fluorn-Winzeln. Dismantling, loading and transportation are to be provided by the buyer.

Condition: not inspected (used), Bluhm Systeme marking lasers Here we offer you a Bluhm Systeme marking laser. Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested) Introduction: The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825 and EN 60825 (standards for end-user applications). It is designed to be Kodpfxsq Rtz He Ah Uenf integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a protection class product in accordance with the above-mentioned directives. The e-SolarMark is a laser system for marking and engraving plastics, metals and foils while stationary or in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. the marking unit with laser head (scanning head) with focusing lens. 2. the control unit contains the power supply unit, electronic control system and firmware for the system function, I/O slots inside. The e-SolarMark includes a fixed galvo scanning head equipped with a lens for a square marking field with standard dimensions of 70 X 70 mm Laser specification in standard version Laser Type---Fiber Laser Laser output power---FL2 model: 19W; typical Wavelength---1062 nm typical Internal Modulation---20 to 80 kHz Scanner Head Description: Scan Head---Two galvanometric mirror scanners with hard, highly reflective dielectric coating. F-Theta Lens types and their characteristics: Lens marking field 70x70 mm to 300 x 300 mm Focus distance B 192 mm Working environment Conditions: Relative humidity up to 80% non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length marking/control unit 3 m Weight marking unit 5 kg Weight of control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption FL2 model 450W Type: e-SolarMark FL Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.