Used Wood Chip Crusher for sale (10,688)

Condition: new, Year of construction: 2024, Wood crusher with cyclone filter, eletrical box, etc... Rsdpfx Aaexf Nwyeasr The machines has a CE certificate. Bjw7wnlw3f0 Quantity of cutting tip: 6 pieces Electric motor power: 30Kw Capacity: 800-1200Kg/hour Drive Type: V-Belt Feeder size: 150mmx150mm Located locally in (EU) Hungary

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Rodor R Ewlspfx Aaaor Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), Rediscovered during hall clearance. As-new KWB wood chip furnace, only operated for testing purposes. The furnace is still on the original pallet. Original documentation is available. According to the manufacturer, it can also be used as a pellet stove. Our chimney sweep confirms that the furnace can be put into operation without additional equipment and meets all requirements. Due to its age, we cannot provide any guarantee or warranty. Rjdpfxoywfadj Aaajr

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Rsdsyhlrmepfx Aaaor

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Rodpfx Aaoyalblsasr

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Rodpfx Aoyrhd Toaaor If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: refurbished (used), We sell a used and refurbished ZE2000 chip crusher. Disruptive parts are not a problem. Rodpjfcqbhefx Aaaor Please contact us with details of the material and quantity of material and we will send you a free quote for the chip breaker.

Condition: used, Substation for wood chip extraction – Wood chip extraction system Brand: Fida Installed power: 37 kW Rjdsyx Digepfx Aaasr System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm

Condition: excellent (used), Gisiger hammer mill currently GT Zesor AG, high-capacity, model USZ 1250 / 1950 manufactured by 355kW Rsdpfxswcb Tks Aaaer Additional sieves and hammers included

Condition: excellent (used), Wood chip silo with rotary extractor: - 56 panels 1500 x 3000 mm in 2.5 mm thick galvanized steel, distributed over 4 levels, supplied with 56 reinforcements and 42 junctions, bolted assembly, - Ø 6250 mm, - Height 12 m, 350 m3 volume, - Self-supporting roof with safety railing, - Caged ladder with a resting platform at 6 m, - 12 Atex vents, - 1 inspection door on the roof, - 1 Ø 480 mm inlet on the roof, - 1 discharge door 1200 x 2000 mm - 1 DENIS ECR 240 rotary extractor, all disassembled and palletized. Rjdpsyhpzfefx Aaaer OR - Silo without extractor for €30,000 excl. VAT - DENIS ECR 240 extractor for €15,000 excl. VAT

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230A Wood Chip and Dust Extractor + 2.5 m Hose The CORMAK FM230A dust extractor is a high-performance chip extraction fan designed for efficient removal of wood chips, shavings, and wood dust generated during woodworking processes. This compact chip extractor is ideal for carpentry workshops, production facilities, and home workshops where effective dust extraction from workstations is essential. The model is equipped with a flexible extraction hose with a length of 2.5 m, allowing quick connection to woodworking machines such as planers, table saws, milling machines, and thickness planers. Thanks to this, the chip extraction system can be easily positioned anywhere in the workshop, ensuring effective removal of dust and chips directly from the source. The powerful extraction fan generates an airflow of up to 1080 m³/h, ensuring fast and efficient suction of wood chips and dust. The solid construction and metal impeller provide stable operation, high durability, and reliability even during intensive use in a woodworking workshop. The mobile design with transport wheels allows convenient movement of the unit between workstations, while the bag filtration system effectively separates air from wood chips. As a result, the wood dust extraction system helps maintain cleanliness in the workshop and improves both comfort and workplace safety. Key Advantages extraction hose included – 2.5 m Ø100 mm high suction capacity – up to 1080 m³/h efficient fan for chips and wood shavings single-phase motor 0.75 kW / 230 V durable metal impeller mobile construction with transport wheels efficient filtration system for chips and wood dust large waste bag enabling long operating time compact design ideal for woodworking workshops Applications The CORMAK FM230A chip and dust extractor is designed to work with many woodworking machines that require effective dust extraction: jointers and planers thickness planers table saws Redpoytn Tdefx Aaasr spindle moulders wood sanders Thanks to the high airflow performance, the dust and chip extractor effectively removes contaminants generated during woodworking, improving visibility at the workstation and reducing the amount of dust in the air. Standard Equipment CORMAK FM230A dust extractor extraction hose Ø100 mm – 2.5 m filter bag waste collection bag mounting clamps mobile base with wheels Technical Specifications Parameter Value Motor power 0.75 kW Power supply 230 V / 50 Hz Extraction capacity 1080 m³/h Motor speed 2800 rpm Vacuum pressure 1000 Pa Noise level 68 dB Number of bags 2 Suction inlet diameter 100 mm Hose length 2.5 m Bag capacity 90 L Height 1800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Rjdpsxwhw Aefx Aaajr Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: new, Year of construction: 2025, Capacity: 1000 - 1500 kg/hour Redpfxsd Im Ado Aaaor Electric Motor Power: 15 kW Machine Weight: 1800 kg

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Rsdpfx Aow Uf S Hjaajr

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity Rsdpfx Aaow Rpdreaer year of manufacture 2014 without discharge unit (can be provided if needed)

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Rjdpfxjin Ewlo Aaaor Do you need further information? Please contact us! We will be happy to advise you.

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Rsdpfow Rpygsx Aaaer Width: approx. 300 mm Height: approx. 280 mm Screw diameter: approx. 180 mm Motor: 1.1 kW

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Rodpod Dy S Rsfx Aaaor Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded 420 x 250 x 100mm Redpfx Aasd Dzahjasr completely welded housing Ring eyelets for suspension

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt Rodpfeff Hgbjx Aaaer conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Dim: approx. 3000 x 500 x 105mm Aluminum construction: Redpsff Hf Dofx Aaaer Conveyor belt width incl. corrugated edge 500mm conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,25Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Rodpfx Aaok S Dw Eoaer Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Rodpfx Aaevvmvfsajr

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm Rsdslx Ndljpfx Aaaer rotor width 450 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled complete with boiler, stocker unit, and discharge system Rsdpfx Aaev Ngq Aoaer