Used Wood Chip Dryer for sale (11,674)

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Dkedpfew Uf S Hex Ag Rok

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght Dkodpfowp Rqfox Ag Rok • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Djdpfxsq Igyvo Ag Rokk Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. Dkjdpfx Ageq Nfuzj Rjk 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Dksdeyy Uzcjpfx Ag Rsk

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) Dsdpfx Ajr R Ewlsg Rjkk - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Year of construction: 2021, condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Input of one about 100 m3 - total 300 m3 Dryers used only for tests - practically new. Complete with full documentation, automation, laptop and internet connection (remote control). Dkodpfx Agjvkxmfe Rek

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Showroom model. Condition like new. Dedpfxsyyb Nyj Ag Rokk We offer for sale a drying chamber powered by a high-efficiency gas burner with an indirect system (no open flames) for heat exchange. Suitable for all types of wood, softwood, hardwood, as well as for pallets or firewood. Used only occasionally for demonstrations and drying cycle tests, 100% fully functional.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – wood-chip biomass boiler (2009) ⚙️ Technical data • 🔹 Model: Fröling Turbomat 500 • 📅 Year: 2009 • 🔥 Nominal output: 450 kW (W40) • ♨️ Maximum output: 495 kW • 💧 Water content: 750 litres • 🧱 Operating pressure: 6 bar • 🌡️ Max. temperature: 110 °C • ⚖️ Weight: approx. 6 800 kg • 🏭 Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ Dkedpfx Aoxmrwfjg Rsk 🔩 Main features • ♻️ Fully automatic ash removal and heat-exchanger cleaning • 🔥 Four-layer, fireclay-lined high-temperature combustion chamber • 💦 Water-cooled feed channel – ideal for moist fuels • ⚙️ Moving grate for continuous and efficient combustion • 🌬️ Lambda control with multi-zone air regulation and low emissions • 🌀 Automatic draught and suction fan control • 🧰 Robust industrial design, easy to maintain • 🌲 Fuels: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • ⚡ High efficiency, fully automatic operation • 🔧 Low maintenance, long service life • 🌫️ Reliable performance even with higher-moisture fuel • 🏢 Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary

Condition: used, Fröling Turbomatic TMC – automatic wood chip boilers (35–110 kW) Several Fröling Turbomatic TMC units in stock – ready for immediate delivery. Output (kW) – Price (net) 35 kW – 5,000 EUR 55 kW – 6,000 EUR 70 kW – 7,000 EUR 85 kW – 8,000 EUR 110 kW – 10,000 EUR The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feeding screw (dosing auger), which automatically transports the fuel directly into the combustion chamber. The complete extraction system (raumaustragung) is usually not included (available separately). 👉 For the 110 kW model, the complete extraction system is already included. ⸻ Key technical features: • Lambda-controlled combustion for optimal efficiency and low emissions  • Automatic grate with vibration and tipping function for self-cleaning operation  • Multi-pass heat exchanger with automatic cleaning (WOS system)  • Automatic ash removal system (combustion chamber + heat exchanger)  • Induced draught fan ensures safe operation even with poor chimney conditions  • Large refractory-lined combustion chamber for stable high-temperature combustion  Dodpfewakktex Ag Rjkk ⸻ Additional benefits: • Modular system – easy installation • Individual drives → high system stability • Automatic adaptation to fuel quality and moisture ⸻ 📍 Location: Mosonmagyaróvár, Hungary 📦 Immediate availability

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Dedpfx Agoyhlrmj Rjkk

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Dkjdpeyalblefx Ag Rek

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Dedpfx Ajyrhd Teg Rekk If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: used, Substation for wood chip extraction – Wood chip extraction system Brand: Fida Installed power: 37 kW System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm Dedpoyx Digefx Ag Rekk

Condition: excellent (used), Wood chip silo with rotary extractor: - 56 panels 1500 x 3000 mm in 2.5 mm thick galvanized steel, distributed over 4 levels, supplied with 56 reinforcements and 42 junctions, bolted assembly, - Ø 6250 mm, - Height 12 m, 350 m3 volume, - Self-supporting roof with safety railing, - Caged ladder with a resting platform at 6 m, - 12 Atex vents, - 1 inspection door on the roof, - 1 Ø 480 mm inlet on the roof, - 1 discharge door 1200 x 2000 mm - 1 DENIS ECR 240 rotary extractor, all disassembled and palletized. OR - Silo without extractor for €30,000 excl. VAT Dodpjyhpzfsfx Ag Rokk - DENIS ECR 240 extractor for €15,000 excl. VAT

Condition: excellent (used), Gisiger hammer mill currently GT Zesor AG, high-capacity, model USZ 1250 / 1950 manufactured by 355kW Additional sieves and hammers included Dksdpfx Agowcb Tks Rjk

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer Dedomidtrepfx Ag Rekk -> transportation, customs clearance and insurance by buyer

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Dedsya Ik Aspfx Ag Rokk Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230A Wood Chip and Dust Extractor + 2.5 m Hose The CORMAK FM230A dust extractor is a high-performance chip extraction fan designed for efficient removal of wood chips, shavings, and wood dust generated during woodworking processes. This compact chip extractor is ideal for carpentry workshops, production facilities, and home workshops where effective dust extraction from workstations is essential. The model is equipped with a flexible extraction hose with a length of 2.5 m, allowing quick connection to woodworking machines such as planers, table saws, milling machines, and thickness planers. Thanks to this, the chip extraction system can be easily positioned anywhere in the workshop, ensuring effective removal of dust and chips directly from the source. The powerful extraction fan generates an airflow of up to 1080 m³/h, ensuring fast and efficient suction of wood chips and dust. The solid construction and metal impeller provide stable operation, high durability, and reliability even during intensive use in a woodworking workshop. The mobile design with transport wheels allows convenient movement of the unit between workstations, while the bag filtration system effectively separates air from wood chips. As a result, the wood dust extraction system helps maintain cleanliness in the workshop and improves both comfort and workplace safety. Key Advantages extraction hose included – 2.5 m Ø100 mm high suction capacity – up to 1080 m³/h efficient fan for chips and wood shavings single-phase motor 0.75 kW / 230 V durable metal impeller mobile construction with transport wheels efficient filtration system for chips and wood dust large waste bag enabling long operating time compact design ideal for woodworking workshops Applications The CORMAK FM230A chip and dust extractor is designed to work with many woodworking machines that require effective dust extraction: jointers and planers thickness planers table saws spindle moulders wood sanders Thanks to the high airflow performance, the dust and chip extractor effectively removes contaminants generated during woodworking, improving visibility at the workstation and reducing the amount of dust in the air. Standard Equipment CORMAK FM230A dust extractor extraction hose Ø100 mm – 2.5 m filter bag waste collection bag mounting clamps mobile base with wheels Technical Specifications Parameter Value Motor power 0.75 kW Power supply 230 V / 50 Hz Extraction capacity 1080 m³/h Dksdpfx Ajytn Tdjg Rek Motor speed 2800 rpm Vacuum pressure 1000 Pa Noise level 68 dB Number of bags 2 Suction inlet diameter 100 mm Hose length 2.5 m Bag capacity 90 L Height 1800 mm Width 750 mm Length 450 mm Weight 27 kg

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust Dkodpfx Ajvzuutjg Rok 3 chambers chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. Dkedoxwhw Aepfx Ag Rjk FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system Dsdpfew Rpdrox Ag Rekk 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed)

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB Dksdpfxoin Ewlo Ag Rek - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Width: approx. 300 mm Height: approx. 280 mm Screw diameter: approx. 180 mm Motor: 1.1 kW Dodpew Rpygjfx Ag Rekk

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Dkodpfjd Dy S Rex Ag Rsk Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55