Used Wood Chipper Shredder for sale (6,959)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,100 h, functionality: unexamined, overall weight: 2,200 kg, number of blades: 42, rotor diameter: 260 mm, WEIMA WL 6 – Single-shaft shredder for wood waste, year of manufacture 2007, only approx. 1,100 operating hours. For sale is a used WEIMA WL 6 single-shaft shredder (wood shredder/chipper) from WEIMA Maschinenbau GmbH, Ilsfeld. The machine comes from a running production facility and is in good overall condition, considering its age. Special feature: The operating hour meter shows only approx. 1,100 hours – with a year of manufacture of 2007, this corresponds to an average usage of only around 60 hours per year. Rotor, bearings, and drive train are therefore expected to show very little wear. The machine is equipped with a conveyor belt feeding unit that automatically feeds the material. The top deck is removable – operation is also possible by manual feeding. The separate control cabinet is fully included and professionally installed (Moeller/Eaton contactors, motor protection switch, safety relay, Siemens S7-200 basic PLC). The machine has not been put back into operation after being removed from the production facility. Inspection in Lennestadt (North Rhine-Westphalia) is possible at any time by appointment. Technical data: Manufacturer: WEIMA Maschinenbau GmbH, Ilsfeld Model: WL 6 Year of manufacture: 06/2007 Operating hours: approx. 1,100 hours (meter reading) Motor power: 18.5 kW Voltage: 400 V / 50 Hz Rotor speed: 90–100 RPM Rotor diameter: 260 mm Rotor length: 800 mm Max. number of knives: 42 pcs. Knife size: 40 mm Screen hole diameter: approx. 14.5 mm (measured) Particle size: 10–60 mm adjustable Feed opening: 800 x 1,250 mm Extraction nozzle: Ø 200 mm Bwedpfx Aioy U Nu Tshep Length: 2,390 mm / Width: 1,390 mm / Height: 1,840 mm Weight: approx. 2,000 kg Feeding: Conveyor belt feed (top deck removable) Control: Control cabinet with Siemens S7-200, Moeller/Eaton contactors, safety relay More pictures on request.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 3K 13/60, fuel type: electric, pre-crusher was used to pre-crush pallets after which they were turned to the right fraction in another shredder. Satrind can still be seen working and can be used immediately. power 44 KW is 60 HP Bedpou Abkhefx Aihewp

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor Bwsdpfxsp H Sv Dj Aihsp 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm Bodpfszbb H Hox Aihewp - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear Bwsdpfxsza Tvde Aihjp - vibrating feeder 2.2kW - vibrating feeder length 6000mm - vibrating feeder width 500mm - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: refurbished (used), functionality: fully functional, Erjo 90 HSMU 802 – Fully refurbished and in like-new condition. Bodpfozc Iuyex Aihowp

Condition: reconditioned (used), functionality: fully functional, Bruks 803CS chipper in very good condition. Bwsdpszc It Ajfx Aihep

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Bwodjza Ei Nepfx Aihsp Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW Bsdpfsza Eipox Aihowp - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6943 TECHNICAL DATA - loading hopper inlet: 1600x1500mm - rotor working width: 1500mm - main motor: 45kW - pump motor: 5.5kW - number of knives: 44 pcs - knife size: 50x50mm - screen: 59mm - pusher drawer - autoreverse feature - dimensions (L/W/H): 3430x2800x2850mm - weight approx. 9000kg ADVANTAGES – French production - New knives installed – Autoreverse – Pusher drawer – Very good condition – Used shredder Bjdpfoza Efqjx Aihswp Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm Bodpfjza D Tmjx Aihowp - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood. Another machine, available immediately (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times, Bwedpfjd E R D Sjx Aihjp Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated slide Screen size optional (12 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segment bottom + €2,170 net (prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks) Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: good (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, The machine was used for reducing waste wood, with little usage. Exchange basket is available. Knives are new. Runs very reliably. Good quality wood chips. Loading included. Bjdpfoy Ulyxjx Aihswp

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm Bsdpeyhzhnefx Aihswp 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable Bwsdjyhzhuspfx Aihop At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. Bodpfjv Tdq Iex Aihewp We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Bwedpoyhzhzjfx Aihep Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Bwjdpfx Aioh Eld Eehep Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm Bwodpfx Aist Tvk Aehjp 22 kw motor with discharge auger

Condition: excellent (used), Year of construction: 2018, Catalogue number 7974 TECHNICAL DATA - Infeed opening of widened hopper: 1500x1730mm - Discharge outlet for shredded wood: 200mm diameter - Rotor working width: 990mm - Main motor: 22kW - Pump motor: 0.75kW Bsdpfx Aiszadxcshewp - Number of knives: 54 pcs - Knife dimensions: 40x40mm - Screen: 20mm - Hydraulic feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x2200x2350mm - Weight: approx. 2000kg ADVANTAGES – German made - Pulse feed pusher - Halfway pusher - Fast/forward pusher – automatic feed drawer speed adjustment – Original DTR documentation + CE, year 2018 – Hydraulic feed drawer – Auger – screw conveyor for chip transport – Auto-reverse – Used chipper, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW Bwjdpszadb Rjfx Aihsp - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: good (used), Code: 0369 Brand: ISVE Model: 25/66 Rotary blade grinder for wood scraps, plastics, packaging, nut shells, fruit stones and pits, leather scraps, wood bark, loppings of trees, and other materials Motor Hp 7,5 (Kw 5,5) Inlet opening diameter mm 250 x 660 It can be connected to a dust collector using a tube placed under the screen Bwodpfx Aoy Hqn Seihep Overall dimensions: mm 930 x 770 x 1800 h Weight kg 680

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Spoerri shredder, 720 mm rotor width, motor power 18.5 kW, feed opening 720 x 860 mm. Bedsza Dc Iepfx Aihswp

Condition: excellent (used), CATALOG NUMBER 7610 Technical data: - Inlet width: 410mm - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts Bwodpfx Asy Uxitjihop - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg ADVANTAGES – Manufactured in Poland – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Bwjdpfx Aezdq E Nsihop Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price.