Used Wood Heating for sale (21,045)

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting Laodpfx Ajh N Thwenxsg -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: used, functionality: fully functional, Solid Wood Press for Sale! Manufacturer: Societa Italiana Macchine Idrauliche, Milan (Italy) • 5 hydraulic cylinders at the top • 4 hydraulic cylinders at the bottom • Working area: approx. 2.5 x 1.3 m • Mechanical/hydraulic control (no automation) • Good visual condition; well-maintained. FULLY FUNCTIONAL ✅ Laedoz Azqtepfx Anxeg

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-50 FA HOT WATER PRESSURE WASHER NEW HEATING COIL The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of up to 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 6 Detergent tank [l]: 10 Hose length [m]: 10 Weight [kg]: 136 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding Laodpfx Anjz Ayd Sexog NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dispensing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Lodpfjytn Tdox Anxeag Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Ledpsxc Ni Refx Anxeag

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Ljdpet R Tr Sefx Anxeag

Year of construction: 2009, condition: ready for operation (used), A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible. Lajdpfx Anjyvuuuexog

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Lasdpfxozk I U Us Anxeg

Condition: used, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.770 mm -Cutting height: max.400 mm Lsdpfokia T Usx Anxjag -Saw band: length 5330 mm -Work table: pivoting -Dimensions: 1470/935/H2390 mm -Total weight: 743 kg

Condition: good (used), Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container Lajdpfx Aned Duvdjxsg -With the pre-melting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Condition: used, Drum heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, heating drum Lodpfx Anoxm Rptoxsag -Handover: in the current condition as viewed -Connection cable: damaged, see photos -Drum heater: Type designation 1082 105 BHT 932 07/20 -Shaft: Ø 40 x 40 mm -Dimensions: Ø 180 x 760 mm -Weight: 49 kg

Condition: used, Year of construction: 2006, Wood chip heating system Fröling Lambdamat FUR 1000, output 1000 kW, year of manufacture 2006, moving grate firing system (for poor fuel quality), hot water system with a maximum protection temperature of 110°C, including pneumatic cleaning system, including hydraulic feed system with backfire protection and hydraulic unit, including multi-cyclone separator with flue gas fan, including flue gas pipes, including control system, including fuel transport system, including sliding floor, system is functional, system must be dismantled by the buyer. Lajdpfx Anevyrwpsxog

Condition: used, Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 Ledpfx Asvrdr Njnxjag -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Condition: good (used), Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater Ledpfxefgmixs Anxsag -Helios: EHR-R 6/315 electric heater battery -with: EHS control -Power: 6.0 kW -Voltage: 400 V -Fan: Ø 315 mm -Dimensions: 380/315/H415 mm -Weight: 5 kg

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: HTT, heating element type 2132G311 Lsdpfx Aneh R Ny Esxsag -Power: about 12 kW 400 V -Bolt circle: Ø 145 x 18 mm -Immersion depth: 800 mm -Total dimensions: 940/185/185 mm -Weight: 13 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø200 x 195 mm -Item No.: 827 382 65 -Heating power: 4640 W -Voltage: 230/380V -Dimensions: 280/215/H195 mm -Weight: 3.1 kg Ljdpfx Anjlvyi Noxeag

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape, heating sleeve -Type: Ø240 x 135 mm -Item No.: 401 2258 -Heating power: 4200 W -Voltage: 230/400 V Laedpfx Aslvykmenxjg -Quantity: 2x heating tape available -Price: per piece -Dimensions: 290/255/H135 mm -Weight: 2.8 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm Lasdpfslvykxox Anxjg -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 1x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: used, Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø200 x 185 mm -Item no.: 814 682 65 -Heating power: 5640 W Lsdpjlvylnofx Anxoag -Voltage: 220V -Dimensions: 285/215/H185 mm -Weight: 3.3 kg

Condition: good (used), Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink Ljdpfx Anspvqygjxjag -Type: 6x opto 22 480D45-12 / 1x electromatic RA4425-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Lajdpfx Anogfwfwexog -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Condition: used, Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Wood Screws: Hex Head Wood Screws -Quality: DIN 571 galvanized steel -Sizes/number: M10 x 40 2080 pcs / M8 x 60 800 pcs Ljdpei E Agrjfx Anxsag -Manufacturer: Reyher/Diverse -Price: complete -Total weight: approx. 80 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Lajdpfx Anob A Sp Nsxsg -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 12 kg

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Lajdezi Hchopfx Anxeg Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg Ljdpjztrfcjfx Anxsag ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)