Used Wood Wool Machine for sale (67,587)

Condition: good (used), Code: 0410 Brand: CMC - ITALY Model: LT 1500 Lathe with copying device for wood and similar materials Technical specifications: Max centre distance 1500 mm Iodpfozc Rmlsx Ad Iotl Centre height 240 mm Max working diameter (without copying device) 450 mm Copying device with manual handwheel feed Gouge rest Tailstock Spindle speed rpm 600/1000/1500/2000 Motor power 1,5 Hp three-phase Overall dimensions mm 2430 x 730 x 1230 h Weight kg 340

Condition: new, Type GB/T10850 Motor power 0.18 kW Air pressure 3-6 bar The power supply voltage 220 V 50 Hz Total power 1.4 kW Heating power 1.2 kW Edge width 8-50 mm Iedpfx Adod Tymno Istl Edge thickness 0,3-3 mm Sealing side speed 0-26 cm/s Vacuum suction of workpiece Transport dimensions Net weight 300 kg

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. The exhibition machine is in original condition, therefore you have the full warranty. Itsdpfx Astpnyked Iol Technical data - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117

Condition: excellent (used), functionality: fully functional, Genini ROTOUR 100 lathe automatic Itodpjy R Abxofx Ad Isl Max working length: 300 mm Max turning diameter: round Ø 140 mm, square 100×100 mm Spindle motor: 15 HP Spindle speeds: 2050-2800-4100-5600 rpm Pump motor: 3 HP Grinding motor: 0.5 HP

Condition: new, Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 30 mm Spindle rotation speed 6000-8000-800-10000 rpm Itjdpfsd R Shnex Ad Iel Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

Condition: new, Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Itsdpfxjd Tqtio Ad Ijl Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a nearly new Teknatool Nova Neptune 190 DVR woodturning lathe with a centre distance of 457 mm. The demonstration machine is in its original condition and comes with full warranty. Technical specifications: - Centre height approx. 190 mm - Max. centre distance 457 mm (optionally extendable!) - Spindle thread M33 x 3.5 with ASR (Euro) runout safety groove* - Spindle and tailstock taper: MK2 Isdpfxoyk Dtze Ad Ijtl - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-step indexing function on the display - Motor: 1.5 hp (230 V) with forward and reverse operation - Tailstock quill stroke: 100 mm (with scale and handwheel with ball-bearing crank) - Four-prong drive centre, live centre, and double taper MK2 - Tool rest (upper tool rest) approx. 230 mm (with 25.4 mm post) - Faceplate 80 mm with ASR (Euro) runout safety groove* - Assembled machine weight approx. 60 kg The machine can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €70.00 incl. VAT Germany: €80.00 incl. VAT South Tyrol: €100.00 incl. VAT Related terms: Lathe, woodturning lathe, turning machine, turning bench, turning, lathe chisel, woodturning, machine Reference: R-A0117

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Itedpfx Aox Sauljd Ijl

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Iedpfozgc Rcex Ad Ietl Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Itedpfxezgr Sij Ad Iol Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: new, Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg Ijdpfx Adjd Tquio Ijtl Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m

Condition: new, Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Ijdpjd Tqtyjfx Ad Ietl Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Ijdpfjvryhgsx Ad Iotl

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Iodpfx Aozy N Syod Ietl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Iodpezy N Rcefx Ad Ietl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Iodpfx Adszgr Nus Iotl Reference: R-D1618

Condition: good (used), Code: 0040 Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Iodev Am Ibjpfx Ad Ietl Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Ijdpfx Aodmi Niod Istl Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: excellent (used), 4-axis machining center with drilling unit and tool changer, including a horizontal head for milling operations. Ijdpfx Adszfpnls Iotl

Year of construction: 2020, condition: new, Type LBM250C Motors 2 x 0.75kW Working length 1300 mm Working thickness 80 mm Ijdefcg Epspfx Ad Ijtl Transport dimensions 2400x600x1300 mm Weight 340 kg

Condition: new, Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Itjdpfx Adsq Ny Efo Iol Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/Ф140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Condition: new, Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Itodpfsd Tqt Nex Ad Isl Transport dimensions 1220x720x900 mm Weight 150 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Ijdpfx Aezy Upksd Ijtl Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, Itodpfx Aeucdt Aed Ijl 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: used, Year of construction: 2001, functionality: fully functional, working width: 240 mm, height adjustment type: mechanical, working height: 150 mm, extraction nozzle diameter: 80 mm, type of input current: three-phase, – Made in Italy – 4 adjustable units – Year of manufacture: 2001 – Declaration of Conformity and CE marking TECHNICAL SPECIFICATIONS: – Working width: 240 mm – Working height: 150 mm – Interchangeable abrasive strips – Power of horizontal head motors: 2 x 0.55 kW – Power of vertical head motors: 2 x 0.37 kW – Horizontal heads adjustable in angle: 0° - 45° – Vertical heads adjustable – Feed speed continuously adjustable via a variator – Feed speed range: 3-18 m/min – Units with variable rotation direction – Nozzle diameter: 4 x 80 mm Itjdpfx Ajzinbfjd Iol – Machine dimensions (L/W/H): 260 / 140 / 160 cm – Weight: 600 kg