Used Worm for sale (313)

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter Bodpfx Abjyw Rhmo Dell - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Bljdpox U Tfpsfx Ab Dsl

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm Bsdpfevvudkex Ab Doll • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Thread cutting capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm Bljdpfx Abecw H Sye Dol Overhang: 225 mm Speed range A: 100 - 2,000 rpm Speed range B: 200 - 4,000 rpm Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Overall height: 955 mm Weight: 110 kg Three-phase motor with frequency control: 1.5 kW Robust, precise universal drilling machine with a wide range of applications. Table/height adjustment is adjustable via rack and pinion and worm gear. Three-phase motor, reversing switch for right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with front-mounted height adjustment. Mains connection 230 V.

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation Bljdpfep Duagjx Ab Del - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Year of construction: 1980, condition: good (used), Movable positioning table, manufacturer WAGNER, type FE4000, year of manufacture 1980. Travel distance: 4,000 mm Bjdpeg Uf I Ajfx Ab Djll Table surface: 4,000 mm x 1,400 mm Feed rate: 8 - 2,500 mm/min Rapid traverse: 4 m/min Load capacity, max.: 12,500 kg Weight, approx.: 12,000 kg In good condition. Hydraulic clamping and worm gear drive.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Bodpfx Abebatamj Dsll Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Bedpjd Erdrefx Ab Djll Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 250 Super AutoCut double mitre bandsaw Speed: 18-110 - Mitre left 60° + right 45° - Sliding quick clamping vice - Solid vice + machine casting - Ball bearing rotary table - Hydraulic brake cylinder - Solid, large material support - Automatic cooling system - Worm gear running in oil bath - Closed saw frame - Adjustable ball roller bearings - Tool compartment - door in the base - Cut monitoring by ammeter - Cutting pressure feed regulator - Support roller (infeed side) - Machine base (supplied disassembled) GBS 250 Super AutoCut 3-stage system: I. Automatic lowering of the saw frame via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut II. high-speed lowering of the saw frame to the workpiece, then switch to normal saw feed. (e.g. for scribing) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) Lowering in idle state Bljdpfx Aber Ik Sqo Dol Saw blade dimensions: 2765x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Bsdpfolxzhtsx Ab Dsll Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 99900338790, wall thickness: 10 mm, overall weight: 1,300 kg, control cabinet length: 700 mm, control cabinet width: 400 mm, control cabinet height: 2,000 mm, total height: 1,300 mm, total length: 2,300 mm, total width: 800 mm, inner dimension length: 2,000 mm, empty load weight: 1,300 kg, Equipment: documentation/manual, The GEA Westfalia Separator UCD 305-00-00 is an efficient two-phase decanter designed for effective separation of liquids and solids. Thanks to its flat conical trommel and extended drum length, it optimizes the separation process and ensures effective liquid discharge. DRUM AND HOUSING CONSTRUCTION The standard housing design provides a robust construction that meets the requirements of industrial applications. Inert liquid discharge enables easy operation and reduces maintenance costs. DRIVE TYPES The belt drive of the drum ensures reliable and uniform rotational movements, while the worm gear drive enables precise control of solid discharge. This combination guarantees high efficiency and durability of the machine. The GEA Westfalia Separator UCD 305-00-00 offers an effective solution for liquid and solid separation. Centrimax is a good and reliable supplier of this machine. Bedpezrmh Aefx Ab Doll This description may have been automatically translated. For further information, please contact us. The information contained in this advertisement is for general guidance only. We suggest verifying the details with the seller before making a purchase.

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm Blsdpex Ndu Djfx Ab Dsl • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: used, mileage: 101,381 km, power: 107 kW (145.48 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 2,915 kg, maximum load weight: 3,085 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,200 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,770 mm, loading space width: 1,114 mm, loading space height: 380 mm, operating hours: 8,519 h, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * One owner * Complete documentation with inspection reports available * 8,519 operating hours * The Kiefer Boki is in visually very good condition * Model: Kiefer Boki 1151B with COPMA loader crane mounted at the rear and folded * 4x4 all-wheel drive * Front lift with municipal hydraulics * Loader crane COPMA 35.3 with 3 hydraulic extensions * Lifting capacities: at 2.75 m = 995 kg, 3.11 m = 885 kg, 4.44 m = 600 kg, 5.77 m = 450 kg, 7.10 m = 355 kg, 8.45 m = 250 kg * Hook height: 10.5 meters * 5+6 control circuits * Rotary servo * Two clamshell buckets available at additional cost * 2 hydraulic outriggers * 3-way tipper * Body dimensions: L=1,770 mm x W=1,114 mm x H=380 mm * Trailer coupling * Towing capacity: 3,500 kg * Snow plow blade available at additional cost * Winter service lighting * 5-speed gearbox * Cab with 2 seats * Worm drive * Heated windshield * Joystick control * Rotating beacon lights * ABS * Differential lock * Leaf spring suspension * Wheelbase: 2,250 mm * Gross vehicle weight (GVW): 6,000 kg * Empty weight: 2,915 kg * Payload: 3,085 kg * In case of sale to traders or for export (both inside and outside the EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Bljdoxxbqfspfx Ab Del Our offer is generally WITHOUT new TÜV inspection, DGUV certification, safety inspection (SP), or UVV regulation inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid misunderstandings about their condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability for errors or incorrect information is assumed. The buyer is obliged to independently verify the condition and features of the goods/vehicles. We reserve the right to change, prior sale, and errors.

Condition: used, mileage: 101,381 km, power: 107 kW (145.48 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 2,915 kg, maximum load weight: 3,085 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,200 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,770 mm, loading space width: 1,114 mm, loading space height: 380 mm, operating hours: 8,519 h, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * One owner * Complete documentation with inspection reports available * 8,519 operating hours * The Kiefer Boki is in visually very good condition * Model: Kiefer Boki 1151B with COPMA loader crane mounted at the rear and folded * 4x4 all-wheel drive * Front lift with municipal hydraulics * Loader crane COPMA 35.3 with 3 hydraulic extensions * Lifting capacities: at 2.75 m = 995 kg, 3.11 m = 885 kg, 4.44 m = 600 kg, 5.77 m = 450 kg, 7.10 m = 355 kg, 8.45 m = 250 kg * Hook height: 10.5 meters * 5+6 control circuits * Rotary servo * Two clamshell buckets available at additional cost * 2 hydraulic outriggers * 3-way tipper * Body dimensions: L=1,770 mm x W=1,114 mm x H=380 mm * Trailer coupling * Towing capacity: 3,500 kg * Snow plow blade available at additional cost * Winter service lighting * 5-speed gearbox * Cab with 2 seats * Worm drive * Heated windshield * Joystick control * Rotating beacon lights * ABS * Differential lock * Leaf spring suspension * Wheelbase: 2,250 mm * Gross vehicle weight (GVW): 6,000 kg * Empty weight: 2,915 kg * Payload: 3,085 kg * In case of sale to traders or for export (both inside and outside the EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV certification, safety inspection (SP), or UVV regulation inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid misunderstandings about their condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. Blodpfjxxi Swjx Ab Dsl All information is provided without guarantee. No liability for errors or incorrect information is assumed. The buyer is obliged to independently verify the condition and features of the goods/vehicles. We reserve the right to change, prior sale, and errors.

Condition: used, mileage: 10,539 km, power: 75 kW (101.97 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,515 kg, maximum load weight: 985 kg, overall weight: 3,500 kg, axle configuration: 4x4, wheelbase: 1,850 mm, next inspection (TÜV): 01/2027, brakes: other, color: orange, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,750 mm, loading space width: 1,250 mm, loading space height: 300 mm, maximum speed: 50 km/h, Equipment: additional headlights, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, * German vehicle * Multiple units available * Only 10,539 km – original * ONLY 974 operating hours * MOT valid until 01/2027 * Condition as shown in the photos * KIF snow plough blade * Clearing width: 1,700 mm Bledpfxex Srame Ab Dsl * KIF combination rear spreader * HAKO broom available at extra cost * With only 1.32 meters width, the Tremo is the ideal compact tool carrier for pedestrian zones, narrow alleys, driveways, etc. * Three-way tipper with steel floor and aluminium drop sides * Body dimensions: L=1,750 x W=1,250 x H=300 mm * 4x4 all-wheel drive with crawler gear * Four-wheel steering selectable – turning circle only 3.10 meters * EasyDrive (hydrostatic drive) (SN) * Heated front windscreen * Front linkage * VW industrial engine * Joystick controls * Radio CD * Comfort cabin with 2 seats * Municipal hydraulics + rear hydraulics * Rotating beacon * Worm gear drive * Winter service lighting * Work lights * Wheelbase: 1,850 mm * GVW: 3,500 kg * Unladen weight: 2,515 kg * Payload: 490 kg * ... * Various attachments for year-round use available at extra cost Should a new MOT inspection be required, we will be happy to provide a quote from our partner workshops. Our offer generally does NOT include new MOT, new DGUV, new periodic inspection, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly desired. All information provided without guarantee. We accept no liability for errors or incorrect information in this offer. Buyers are required to independently verify the condition and equipment of the goods/vehicles for themselves. Subject to change, prior sale, and error.

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Bodji D D A Sopfx Ab Doll Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg Bodpfjxf Uytjx Ab Djll

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Year built: 2005 Bsdpfxjy Edfbs Ab Djll Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Blodpoy Dquyjfx Ab Dsl Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Conveyor dimensions LxWxH: 2.500x900x2.100 mm Total weight: 3.300 kg.

Condition: used, Holac Industrial Dicing Machine – VA Series (VA 90 / VA 120) Manufacturer: Holac Type: Industrial Dicing / Cubing Machine Model: VA Series (exact model to be confirmed) Availability: Direct Description This Holac industrial dicing machine is designed for high-capacity and precise cutting of a wide range of food products. The machine is equipped with a robust worm feed system, ensuring consistent product flow and uniform cutting results. Suitable for cutting products into cubes, strips or slices, depending on the installed knife set. Ideal for meat, cheese, vegetables and plant-based products. The machine is fully stainless steel, hygienically designed and easy to clean. Equipped with an original Holac Panelware control panel. Key Features - High-capacity industrial dicing machine - Continuous worm feed system - Interchangeable knife grids for different cutting sizes Bledpfx Aex Ti Hmsb Del - Suitable for fresh and lightly frozen products - Solid stainless steel construction - Reliable and proven Holac technology Technical Specifications (approx.) - Capacity: up to 1,500 – 3,000 kg/hour (product dependent) - Cutting sizes: approx. 5 x 5 mm up to 40 x 40 mm - Product temperature: fresh to approx. -2 / -3 °C - Power supply: 400V / 50 Hz - Installed power: approx. 5.5 – 7.5 kW - Material: stainless steel (food grade) Applications - Meat (fresh or lightly frozen) - Cheese - Vegetables - Plant-based products - Convenience & pet food - Machine is in good working condition and ready for production. Video available on request. 📍 Located in the Netherlands 🌍 Worldwide delivery possible The information contained in this advertisement is for general information purposes only. Although care has been taken to ensure accuracy, no liability is accepted for any errors or omissions. Specifications are subject to change.

Condition: used, ALFA LAVAL Separator Type: MRPX 318 HGV-74C / 88-1005-01-00 Manufacturing No.: 2969862 Worm Wheel Shaft: 1420–1500 rpm Tachometer: 1420–1500 rpm Revolution Counter: 110–125 rpm Alfa Laval MRPX 318 HGV-74C self-cleaning hermetic separator, complete stainless steel unit in good condition (dismantled). Manufacturing No.: 2969862 Product No.: 88-1005-01-00 Technical Details: - Bowl diameter: approx. 318 mm - Speed: approx. 8,000 rpm - Motor: approx. 22 kW - Capacity: approx. 15,000 – 25,000 L/h (depending on product) - Worm wheel shaft: 1420–1500 rpm - Tachometer: 1420–1500 rpm - Revolution counter: 110–125 rpm - Self-discharging (HGV type) Ideal for milk, whey, juice, or other liquid-solid separation in the dairy or food industry. Clean, complete machine ready for operation or integration into a production line. Bedpoxqm Rnefx Ab Dsll Location: Denmark Condition: Used / tested Price: Upon request Inspection: Possible by prior arrangement

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 25 h, Powerful low-lift pallet truck in top condition for sale! The truck is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 25h Year of manufacture: 2025 SCHORR fully electric low-lift pallet truck with a load capacity of 1500kg 1500kg load capacity Bjdpfewh Nwuox Ab Doll 24V 65Ah AGM batteries Fully electric & self-propelled Ideal for trucks Support wheels included Integrated charger SCHORR electric low-lift pallet truck with a load capacity of 1500kg and maintenance-free AGM batteries. The SCHORR electric low-lift pallet truck is the perfect solution for making your warehouse logistics more efficient and faster. With a load capacity of 1500kg and a fully electric drive, it effortlessly handles the heaviest transport tasks. This saves time and effort and increases the productivity of your employees. The built-in 65Ah batteries are completely maintenance-free and more resilient than the lighter lithium-ion batteries. A stable and consistent power output from the batteries is particularly important for pallet trucks. The battery charger is built into the machine, so you can simply drive to a 230V outlet – without having to carry a separate charger. The electric low-lift truck is also highly maneuverable and, thanks to its compact size, can be easily maneuvered in narrow aisles and spaces. POWERFUL DRIVE FOR EVERY SITUATION The completely maintenance-free 24V batteries with a capacity of 65Ah provide enough power for the pallet truck. Particularly practical: Thanks to the integrated charger, charging the battery is child's play. Simply drive to the outlet, unplug the cable, plug it in, and you're done! The weight of the AGM battery also ensures a lower center of gravity, significantly improving handling. ROBUST AND HIGH-QUALITY CONSTRUCTION The RR15NHE3 impresses with its robust construction, making it suitable for any task – whether in a warehouse, retail store, or truck. The standard support wheels also help, allowing you to move your goods safely and stably. The pallet truck is constructed entirely of solid steel, making it particularly robust and durable. HIGH-QUALITY MATERIALS The wheels of the RR15NHE3 are made of abrasion-resistant and non-marking polyurethane. The tines are equipped with tandem load rollers, and the drive wheel is stabilized by side support wheels. THE USUAL GOOD SAFETY AND OPERATION The ergonomically designed tiller head of the RR15NHE3 makes operation easier for both experienced users and newcomers. The pallet truck is equipped with important safety features such as an emergency brake belly button, an emergency stop button, and a worm gear mode for sensitive loads or tight work areas. Convince yourself of the quality of this fully electric pallet truck and order it today. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR15NHE3 Load capacity: 1500 kg AGM battery (24 V 65 Ah) Length: 1604 mm Width: 685 mm Height: 82 mm Fork length: 1150 mm Tires: Polyurethane Weight including battery: 145 kg Our competent team is happy to answer any questions you may have about the SCHORR 1500 kg electric pallet truck. We look forward to hearing from you and providing advice.

Condition: new, Year of construction: 2024, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Gross price: 3.399,00€ incl. VAT Net price: 2.856,30€ excl. VAT Bedsidqr Sspfx Ab Dsll The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. TECHNICAL DATA see picture Further data and information on request, we look forward to your call or message!

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 25 h, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Bsdpfx Abewh Rbbs Doll Gross price: 3.399,00€ incl. VAT Net price: 2.856,30€ excl. VAT The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. TECHNICAL DATA see picture Further data and information on request, we look forward to your call or message!

Condition: new, Professional industrial worm gearbox from the renowned manufacturer AUMA. The device is factory-new, stored, and in excellent technical and visual condition. Robust and heavy-duty construction, designed for use in industrial installations, fittings, valves, dampers, and heavy drive systems. Technical data: * Manufacturer: AUMA * Type: GF 125.3 * Version: RR * Gear ratio: i = 208:1 * Input torque: 53 Nm * Output torque: 4000 Nm * Protection rating: IP67 * Operating temperature range: -25°C to +80°C * Lubrication: F1 * Shaft with keyway * Heavy-duty industrial housing Applications: * Actuators for valves and dampers * Industrial installations * Power industry * Water supply and wastewater treatment plants * Industrial automation * Pipeline systems Blodjy Sitwspfx Ab Dsl Condition: new, from stock. Price applies to 1 unit.