Used Xion Medical for sale (1,103)

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. The unit is in full working condition and is ready for immediate release. Hjdpfx Ajxv A Sreazju This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Condition: used, This listing is for the Barkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Hjdpjyufrgsfx Aazeu Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Condition: used, This listing is for TSI Airflow LCA501 in Case. The unit is in full working condition and ready for immediate use. TSI Airflow LCA501 digital vane anemometer with carry case. Designed for high-accuracy air velocity and volumetric flow measurements in HVAC and lab safety applications. Features logging, data download, and 100mm reversible head. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Hjdsyx Igijpfx Aazsu Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Year of construction: 2002, condition: used, This listing is for a Lancer Washer Infeed Type 1600 PCM DPSS The unit is in full working condition and is ready for immediate release. Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Hjdpfxjxhfkuj Aazju Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: used, This listing is for the MSE MSB010 Micro Centaur Plus Centrifuge The unit is in full working condition and is ready for immediate use Overview & Applications Designed for in vitro diagnostic (IVD) use and routine medical analysis, supporting separations of mixtures, suspensions, and bodily fluids. Lightweight (≈ 5 kg) and small in footprint (≈ 220 × 270 × 180 mm), making it ideal for benchtops, cold rooms, and transport between labs. MedWrench Hedpfx Asxhfy Aeazju Rotors & Accessories Compatible with a wide range of rotors, including: 24‑place 2 ml rotor 18 × 0.5 ml 12 × 2 ml PCR strip rotors Haematocrit capillaries (24 × 50 mm) MedWrench Summary The MSE Micro Centaur Plus (MSB010) combines high speed, compact design, programmable flexibility, and strong safety measures. It's a reliable, maintenance-light option with long-term part availability, making it a solid addition to lab environment

Condition: used, This listing is for the HAWO HPL 500 Del Rotary Heat Sealer The unit is in full working condition and is ready for immediate use Hedpfx Asxhgcxsazju The HAWO HPL 500 D-V machines are considered to be best in class rotary heat sealers designed specifically for the industrial, medical and healthcare markets. The machines produce consistent and optimal seals for sensitive goods

Condition: used, This listing is for the Applied Biosystems ProFlex PCR Sytem Hedpfx Aaex Syrqszsu The unit is in full working condition and is ready for immediate release. The Applied Biosystems ProFlex PCR System is a thermal cycler/performance PCR instrument designed for amplifying DNA through PCR — a core technique in molecular biology for cloning, sequencing, gene expression studies, genotyping, and other applications. It’s used in research, teaching, and clinical lab settings (research use only; not for diagnostic procedures)

Condition: used, This listing is for the Grant QBT1 Heat Block Hedpfex S H D Hox Aazju The unit is in full working condition and is ready for immediate release The Grant Model QBT1 Dry Block Heater With 24x10.5mm Well Block is a compact dry block heater designed for laboratory temperature-controlled heating of small sample tubes. It’s part of Grant Instruments’ dry block heater family, used widely in molecular biology, biochemistry and general lab work for consistent incubations or reactions in tubes A dry bath / heat block heater that provides precise, stable heating for tubes (especially 1.5 mL Eppendorf-style tubes), without using water or oil baths. The heat is delivered through a removable aluminium block tuned to fit a specific tube format — in this case typically 24×1.5 mL tubes

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) Hjdpfx Aaoyxcqvozju - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Hsdpfjyt Idvox Aazeu Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, Professional BELIMED MST-V 6-6-12 VS2 steam sterilizer from an ongoing food production facility for sale. The unit was originally developed for the medical field and is now successfully used for sterilizing beverage bottles in a smoothie production line. Up to 350 bottles are sterilized per cycle on specially adapted trolleys. Hjdpfx Aozccqieazeu The autoclave features a modern Siemens control system with a touchscreen, programmable sterilization cycles, and stored programs for sterilizations above 121°C. Programs are programmable, and the display language can be selected. Of particular note is a recent test report from an independent food institute, featuring FDA-compliant temperature penetration measurements within the product. The system is in very good technical condition. In recent years, the sterilization door, pumps, and motors have been replaced. The autoclave is currently in daily use and can be inspected under real production conditions until August 2026. Further details: * Pass-through design with a door at the front and rear * Siemens control system with a color touchscreen * Display currently set to Polish; other languages are possible * Programmable sterilization cycles * Stored programs > 121°C * FDA-compliant temperature penetration measurement available * Test report from an independent food institute available * New sterilization door * Pumps replaced * Motors replaced * Regularly maintained * 1 transport trolley included * Additional transport trolleys available * Currently in use in a food production facility * Inspection possible during ongoing operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €29,900 (negotiable)

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Hodpfszy If Eex Aazsu Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, CITIZEN CINCOM R 04 VI is a CNC automatic lathe / Swiss-type lathe designed for high precision, accuracy and reliability. It features 6 axes and 2 spindles, max. turning diameter 4 mm, max. turning length 40 mm, internal spindle diameter 9 mm, max. threading diameter 3 M. Main specs: up to 20000 t/min, spindle power 0.5/0.75 kW; tool-holder count 3 with 15 stations; turning tools 5, drilling tools 4, transverse tools 2; tool shank 8 mm; counter-operation 4 tools. Voltage 50 Hz 3x400 V; machine weight ≈850 kg; dimensions L1485×W560×H1410 mm. Accessories: LNS TRYTON 107 Hybrid bar feeder, parts catcher, coolant system, lamp. Ensures tight tolerances; suited to watchmaking, medical, automotive, aerospace and precision components. Hjdpfxozv I D Hj Aazeu

Condition: used, DMG HSC 55 linear is a 5-axis machining center with high precision, superior accuracy and reliability. Travels X450 mm, Y650 mm, Z460 mm; A -10/+110°; tool magazine 120 places; tool Ø 80 mm; tool length 250 mm; max tool weight 6 kg; spindle taper HSK63. Spindle 2–28000 t/min, spindle power 38/28 kW; 50Hz 3x400 V; total installed power 70 kVA; machine weight ≈9500 kg; overall dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical for automotive, aerospace, medical, watchmaking and machine-tool manufacture. Hedjzv Nh Topfx Aazju

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Hodpfxozk Ekgj Aazju Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Year of construction: 2009, condition: used, functionality: fully functional, For sale is a Thermo Scientific iEMS Incubator/Shaker (Type 1410), ideal for ELISA applications and other microplate-based assays. Condition: Function-tested, heats and shakes flawlessly, incl. 9 original microplate holders. • Capacity: Up to 9 x 96-well microplates (3 levels with 3 slots each) Hsdpfx Aaszyahrozeu • Temperature range: Programmable from 14 °C to 40 °C, controlled incubation range: ambient +3 °C to 40 °C (resolution 0.1 °C, accuracy ±0.3 °C) • Shaker: Orbital shaker with variable speed (400–1400 rpm in 250-step increments), programmable up to 48 hours • Dimensions: 400 x 400 x 450 mm • Weight: approx. 30 kg • Ideal for: ELISA, assays, diagnostic labs, research, routine lab work The unit was regularly serviced in laboratory operation, shows only minor signs of use, and is technically in very good condition. Shipping or pickup by arrangement; please inquire for international shipping. Feel free to get in touch with any interest or questions!

Condition: used, mileage: 296,516 km, power: 120 kW (163.15 HP), first registration: 03/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals in the front on the side, roof control unit with reading light for driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall paneling, thermal insulation for the driver's cab, heat protection glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver's side, display for washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/superstructure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, maintenance interval display Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle * 1st owner * Air-suspended rear axle * Ambulance and rescue vehicle with box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher frame * Central locking for the patient compartment * KONVEKTA air conditioning system * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system prepared * 12 + 230 Volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-around work lights Hodpfxszn Elrs Aazju * Partition with sliding window * Ambient lighting on the right, left and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning in the front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti with DOT 2025 and approximately 8.0 mm of tread depth all around. Engine, automatic transmission and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. The starter battery is new. +++ Subject to errors, changes and prior sale.

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Hedpfoz Dft Eex Aazsu Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% MTF ≥ up to 55%

Condition: good (used), functionality: unexamined, Year of construction: 2014, Used BioMérieux VITEK MS 410895 Mass Spectrometer for sale! We have 3 similar units available; in case of buying multiple at once, we can provide discounts. Hjdjxcwaqjpfx Aazou Worldwide shipping available – please contact us for a quote. If you're in need of vacuum pumps, accessories, or any vacuum-related equipment, don’t hesitate to reach out. We’re happy to assist with sourcing, technical advice, or custom solutions.

Condition: ready for operation (used), functionality: fully functional, !!! We have two units in stock. Price is for one unit only !!! 🔄 Shaking & Drive System Hsdpfxoz Dhl Ro Aazou * Speed Range: 25 to 400 RPM (maximum 300 RPM when units are stacked). * Shaking Orbit: 3/4 inch (1.9 cm) circular orbit is the standard configuration (some documentation notes 1-inch or 1/2-inch options depending on the exact sub-model code). * Drive Mechanism: Triple-eccentric counterbalanced drive powered by a maintenance-free, brushless DC motor. 🌡️ Temperature Control * Temperature Range: 4°C (or 20°C below ambient temperature) up to 75°C (for 50 Hz units) or 80°C (for 60 Hz units). * Control Accuracy: Ambient temperature can be set in 0.1°C increments with a control accuracy of ±0.1°C. * Refrigeration: Hermetically-sealed 1/5 HP compressor using CFC-free R134A refrigerant. 📐 Capacity & Dimensions * Overall Dimensions: 24.4" W × 28.7" D × 36.4" H (62 cm × 73 cm × 92.5 cm). * Internal Chamber: 20.5" W × 20.5" D × 24.8" H (52 cm × 52 cm × 63 cm). * Platform Size: 18" × 18" (46 cm × 46 cm) standard universal or dedicated platforms. * Flask Capacity: Accommodates glassware ranging from 10 mL up to 6-liter Erlenmeyer flasks. * Static Incubation: Includes 2 height-adjustable stationary shelves for incubating Petri dishes or test tube racks without shaking. * Net Weight: Approximately 300 to 360 lbs (136 to 163 kg) depending on options. ⚡ Electrical & Utility Features * Power Requirements: 240V versions (50 Hz), up to 1500–1800 VA maximum power consumption. * Timer: Continuous or programmable from 0.1 to 99.9 hours. * In-Chamber Outlet: Internal, moisture-resistant electrical outlet to power secondary equipment inside the chamber. * Safety Features: Automatic shaker shut-off when the door is opened, independent over-temperature thermostat, and audible/visual alarms for speed and temperature deviations. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2020, Keyence VR-5000 – Non-contact 3D measurement system The Keyence VR-5000 One-Shot 3D is an advanced, non-contact measurement system that utilizes optical technology for fast and highly accurate measurement of part geometry. The device performs a complete 3D scan in seconds, enabling dimension control, profile analysis, height, volume, and surface roughness analysis, as well as comparison of parts with a CAD model. The offered set includes: * Keyence VR Series One-Shot 3D measurement head * Keyence VR-5200 controller * Keyence VR-H3W measurement table * Dell control computer * HP monitor * Keyboard and mouse * Operating manual * Complete set, ready for operation Key advantages: * Non-contact 3D measurement with high accuracy. * Very fast measurements – a complete scan in seconds. * No influence of pressing force on the measured part. * Automatic generation of height maps and 3D models. * Ability to measure parts with complex geometry. * Intuitive software with reporting and export functions. * Ideal for quality control, metrology laboratories, the automotive, aerospace, electronics, medical industries, and precision manufacturing. Typical applications: * Measurement of height, width, and depth. * 2D and 3D profile analysis. * Tool wear analysis. * Volume and flatness measurement. * Inspection of parts after CNC machining, stamping, and molding. * Comparison of the part with a reference CAD model. * Quality control of serial production. Condition Hedpfx Aezr Rllsazou The device is in very good visual and technical condition. The set is complete and includes the control computer and accessories shown in the pictures. Please send a specific price offer.

Year of construction: 2021, condition: ready for operation (used), The GatheRex™ Cell Harvest Pump is a liquid handling device designed to work with closed system cell culture devices. The GatheRex connects to closed system devices and uses a low pressure forced air mechanism to remove media, concentrate cells and minimize storage and/or downstream processing. An internal air pump pressurizes the system by pumping air through the sterile vent filter on the cell culture device. When pressurized, excess media, or a cell fraction, is forced out of the device through the tubing assembly then into a collection receptacle. Hedpfjz Dx Susx Aazou Model 80000Z is designated by black ID tags on the tubing pinch clamps. This version is compatible with large diameter tubing (0.375” OD) for media removal and small diameter tubing (0.160” OD blood transfer bag style) for cell recovery. ELECTRICAL REQUIREMENTS 1. Input: 100-240VAC, ~1.3A, 50-60Hz, Single Phase Fuse Type: 5ET 3.15-R, Cartridge, Time Delay, 3.15A, 250 V, 5mm x 20mm (0.2” x 0.79”), 5ET Series Detachable Power Cord: C13, 18AWG, 10A minimum, Grounded (3 Prong), UL 62, CSA-C22.2 No. 49 IEC / UL: 61010-1 edition 3.1 and 61326-1:2012 LOW PRESSURE OUTPUT 1. Gauge Pressure: 120 – 180 mmHg (2.32 – 3.48 psi) No adjustments for altitude are needed. 2. Flow Rate: Minimum 5 mL/sec fluid transfer rate from G-Rex M-CS ENVIRONMENTAL CONDITIONS 1. Temperature: 15°C to 35°C (59-95°F) 2. Humidity: ≤ 95% Relative Humidity 3. Altitude: < 2,000 meters (6,561 feet) Good working condition. Please check out our other listings as well.

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Hodovzr Nbopfx Aazou Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: excellent (used), Year of construction: 2023, operating hours: 4,600 h, functionality: fully functional, machine/vehicle number: 023-02-0021-WSXXL II CE12, overall weight: 3,500 kg, type of input current: AC, input voltage: 120 V, table length: 700 mm, table width: 400 mm, total height: 2,380 mm, total length: 2,450 mm, total width: 1,460 mm, laser wavelength: 1,064 nm, Equipment: type plate available, Photon Energy Workstation XXL II CEPHEUS Mark12 – UKP/Picosecond Laser System For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. This system is particularly suitable for operators of existing Photon Energy/Hitachi systems, medical technology companies, laser marking service providers, or companies with a need for UDI-compliant, permanent marking. Key data: Year of construction/manufacture: February 2023 Operating hours: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: under 15 ps Repetition rate: 20 to 500 kHz Cabinet dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 rotary axis available PHOTONmark, PUC/UDI Control, CamVisionPro and hand scanner available Last maintenance: June 2026 Condition: very good Inspection and test run possible by appointment Hedpjzxrv Eofx Aazsu Without exhaust system, as a central exhaust system is used at the current location. The reference point limit switches in the X, Y, and Z axes have already been converted to proximity switches. The system is financed through a lease. Sale, buyout, direct settlement, or transfer of the contract will be arranged in coordination with the financing partners involved. Sale exclusively to commercial operators/companies. No warranty; liability for defects is excluded in the purchase contract to the extent permitted by law. The system will be delivered in working order with installed control and marking software as well as the activated options. Customer-specific jobs/production programs, article, serial number, UDI and process data will be deleted before handover for data protection and confidentiality reasons. According to the manufacturer, it is generally possible to partially upgrade or modify the machine according to needs. The type and scope of such a modification must be agreed upon by the buyer directly with the manufacturer or service partner and is not part of this sales offer.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Hedpfozcqy Eex Aazsu Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!