Used Xion Medical for sale (1,098)

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Bdjdpfx Aeyt Idvjl Aeh Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting

Condition: good (used), Thermo Fisher ARCTIC A25 Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Bsdpfx Ajzgcgdol Asdh Length: 48.3 cm Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for Thermo Scientific Cytospin 4 Centrifuge. Bodeza Dcbopfx Al Ajdh The unit is in full working condition and ready for immediate use. Power-On Verified The Thermo Scientific Cytospin 4 is a premier cell preparation centrifuge designed for thin-layer cell deposition. It utilizes centrifugal force to isolate and deposit cells onto microscope slides while maintaining cellular morphology. Features include a sleek design, simple touchscreen controls, and enhanced safety protocols. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Integrity: 100% Original Parts (Non-Refurbished) • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: excellent (used), Stratasys 3D Printer Dimensio elite Here, we offer a Stratasys 3D printer, Dimensio elite. Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of Stratasys’ Design Series. Bdsdpfx Aljzdnprj Aoh The Dimension Elite printer is ideal for printing 3D prototypes and for modeling functional components, such as medical devices, mobile electronic devices, or precision instruments. With a simple click on “Print,” the CAD file is prepared, and the printing process is started. After easily removing the soluble support material, a precise and highly detailed component is revealed. Manufacturer: Stratasys Type: Professional operation Material(s): ABS Technology: Fused deposition modeling Assembly: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Layer thickness (µm): 178 Speed (mm/s): - Precision (µm): - Filament thickness (mm): - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Required power: 100 to 120 VAC, 60 Hz, at least 15 A on a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A on a dedicated circuit Type: Dimensio elite Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Bdjdpfezdtfljx Al Ash Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Incubator Here we offer an incubator. Volume: 30 liters Manufacturer: Heraeus External dimensions: Height 552 mm x Width 552 mm x Depth 610 mm Internal dimensions: Height 231 mm x Width 352 mm x Depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1.00 A 0.22 kW Weight: approx. 41 kg Type: B 6030 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone. Bdjdpfx Aszdtiqjl Ash

Condition: excellent (used), Heraeus Drying Cabinet / Hot Air Sterilizer We offer a Heraeus drying cabinet / hot air sterilizer. Manufacturer / Type: Heraeus SUT 6060 Features: Bsdpszdti Djfx Al Asdh Temperature range: 250 °C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 339 mm, Width 403 mm, Height 380 mm External dimensions: Depth 535 mm, Width 744 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Rated current 7.1 A, Rated power 1.64 kW Type: SUT 6060 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, The conveyor belt from Kraus GmbH is for sale. It was previously displayed at a trade show and has the following technical specifications: Bdsdpfx Ajziuqgel Ash New price of the belt: €7,000 Belt length: 2600 mm Belt width: 1200 mm (usable width) Overall width: 1300 mm Height: 800 mm - 950 mm Mobile Load capacity: 100 kg Belt speed (constant): 2 m/min Conveyor surface: Modular belt, PP/gray, with FDA approval (suitable for medical/food applications) Gear motor: SEW 230/400V Frame made of galvanized profiles with bolted connections.

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Bjdpfx Ajzixy Sol Aodh Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Condition: used, Year of construction: 2021, Canon CX-1 system, including computer, packed in its original manufacturer’s boxes. Serial number: 210141 – Year of purchase: 2022 Bdjdpozmxqrsfx Al Ash The system was purchased for a brief clinical study and has seen very limited use; it is in excellent condition.

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer Bedpfx Aljzk Ekgj Asdh This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: new, Year of construction: 2025, functionality: fully functional, DOBOT Robot CRAF Series CR20AF Bdsdpfx Alszm Rwqo Ajh The next generation of force-controlled cobots The DOBOT CRAF series is designed for high-end manufacturing applications such as precision assembly, complex grinding, and medical automation. It redefines intelligent force control with its proprietary algorithms and integrated high-resolution sensors. It offers plug-and-play operation without installation or deployment, enabling adaptive force applications and seamless human-robot collaboration – setting a new standard for precision, safety, and ease of use in intelligent manufacturing. Maximum payload: 20 kg Working radius: 1,700 mm Repeatability: ±0.05 mm All-in-one force control, plug-and-play Based on the CRA series, the CRAF series features a highly precise 6-axis force sensor integrated into the flange, providing the cobot with enhanced, compliant force control and precise operating capabilities. Intelligent force control with safety and reliability Gentle pulling – easy to control The entire flange serves as an active resistance zone for intuitive teaching. Assembly Users can restrict the orientation for precise path programming. Welding Thanks to the extremely low starting force (< 2N), the CRAF robot can be easily controlled by touching it with a straw. This enables millimeter-precise drag learning and achieves point-to-point accuracy of 0.1 mm. Polishing The CRAF robot maintains constant force with automatic compensation, ensuring flawless performance in high-precision applications such as grinding and polishing car parts. Healthcare The robot features real-time detection of the external environment (e.g., detection of height differences on the table) with automatic surface scanning, enabling adaptive motion control for precise task execution based on environmental feedback. Other collaborative scenarios With integrated force-sensitive collision detection (sensitivity up to 1 N), the CRAF robot significantly reduces collision forces while achieving industry-leading shock resistance of 2000 N – allowing it to reliably handle frequent operating shocks and collisions due to disturbances in real-world applications. Application scenarios: welding, loading and unloading, gluing, transporting Further details, article numbers and images are available on request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The statutory value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping costs vary depending on the number of items, weight and desired delivery conditions. Due to the weight and size of the robot, it can be shipped within Germany for €95 gross. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: excellent (used), Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is via the installed autosamplers. Continuous and automated operation is possible. Equipment and Design Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Bdedpjy D Sqvofx Al Ash Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical Data Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Device Type: Elemental Analyzer Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial Numbers: 420126446 and 420126487 Dimensions Main Unit Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight Main Unit approx. 45 to 60 kg Autosampler each approx. 8 to 12 kg Total approx. 60 to 80 kg Condition Used, with signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of Delivery Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, This listing is for the Semper Safehood 120 The unit is in full working condition and is ready for immediate uses Dimensions 1200mm L x 710mm D x 1200mm Ht The Semper Safehood 120 is a robust and reliable safety cabinet engineered to provide a secure environment for handling hazardous chemicals, powders, and biological agents. Combining high-efficiency filtration with ergonomic design, the Safehood series is a staple for laboratories prioritizing operator safety without compromising on workflow efficiency. Bodpsyu T H Sofx Al Ajdh Key Features & Benefits: Advanced Containment: Specifically designed to capture and filter harmful vapors and aerosols, keeping the breathing zone of the operator clear and safe. Optimal Visibility: Features large transparent side panels and a clear front sash, ensuring the user has a full, unobstructed view of their delicate work. User-Centric Ergonomics: The spacious 120cm internal width provides ample room for equipment, while the low-noise operation reduces fatigue during extended use. Easy Maintenance: Built with smooth, chemically resistant surfaces that allow for rapid decontamination and easy cleaning between different applications. Reliable Monitoring: Includes built-in safety alarms and airflow monitoring to ensure the unit is always performing at peak protective levels.

Condition: used, This listing is for the Gram R290 Fridge Bodpfeyvkttex Al Aodh The unit is in full working condition and is ready for immediate use Minor damage to front door - Does not effect the operation. The Gram R290 Fridge is a professional-grade laboratory cooling solution designed for high-performance storage while maintaining a low environmental footprint. Eco-Friendly Cooling: Utilises R290 (Propane) refrigerant, a natural hydrocarbon with extremely low Global Warming Potential (GWP), significantly reducing your lab's carbon footprint compared to traditional HFC-based units. Precision Temperature Stability: Engineered to maintain tight temperature tolerances, ensuring the integrity of sensitive biological samples, reagents, and chemicals. Energy Efficiency: The R290 system is inherently more efficient, leading to lower operational costs and reduced heat output into your workspace. Durable Design: Built with high-quality materials to withstand the rigorous demands of a busy laboratory environment, featuring easy-to-clean surfaces and adjustable shelving. Safety & Compliance: Often equipped with advanced controller systems and alarms to alert users of temperature deviations, ensuring compliance with laboratory storage protocols.

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab STARlet M Bdsdpfx Aljy Ex Uqo Aoh The unit is in full working condition and ready for immediate use. Software is included A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: good (used), Year of construction: 2022, Ref. no.: 18635 Manufacturer: SEPRO Type: 5 T25 Year of construction: 2022 Further information: The SEPRO S5-25 med is a powerful 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines. The robot is in very good technical and cosmetic condition and comes from a clean production environment. The “med” version is specifically designed for medical manufacturing and cleanroom applications. Bdjdpey Ub Edefx Al Ajh The robot was used exclusively for testing and training purposes and therefore has very low operating hours. The robot is additionally fitted with a Zimmer Group pneumatic rotation module and a Gimatic QCY90-A Quick Tool Changer system. The Zimmer module allows components to be rotated between defined positions, while the Gimatic system enables quick changing of grippers or vacuum tooling. These additional features increase the flexibility of the robot for a wide range of automation applications.

Condition: used, This listing is for Amersham BPG Chromatography Column 100/500 The unit is in full working condition and ready for immediate use. This lab-scale column offers high-performance fluid dynamics and scalable design, making it ideal for robust downstream processing and reliable chromatographic separations in professional laboratory environments. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. Bedpjzqf Dmofx Al Asdh – downstream processing and purification of fermentation products

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. Bjdpjzpvdzsfx Al Ajdh TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: used, SCHAUBLIN 202 TG-CNC W25-0127 is a CNC turning, milling and grinding centre engineered for precision, high accuracy and reliability. Capacities: 3 axes, centre height 60 mm, travels Z 300 mm, X 150 mm, collet bore 19 mm (W25), resolution 0.0001 mm, C‑axis 0.0001°. Specs: spindle up to 7000 rpm, power 5/6 kW, max torque 26.1/35.1 Nm, rapid traverse 20 m/min, supply 3×400 V 50 Hz, weight ≈3000 kg, overall 1930×1300×2040 mm. Accessories: coolant, Ethernet, chip conveyor, parts catcher, loader LNS Express 112+, rinsing guns, fire extinguishing system. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Bdodpfszqbg Rjx Al Aeh

Condition: used, WILLEMIN MACODEL 408S2 is a Machining and turning center from bar with high precision, superior accuracy and reliability. Travels X 250 mm, Y 200 mm, Z 310 mm; B axis -100°/+30°; resolution 0.0001; bar capacity Ø32 mm; tool magazine 24 positions; tool length 95 mm, max weight 1 kg; tool change 0.8 s; Ø with free adjacent pockets 80 mm. Spindle nose HSK E-25, stepless up to 75'000 t/min; voltage 50 Hz 3x400 V; total power 16 kVA; machine weight ~2300 kg; footprint L1840 x W2450 x H1385 mm. Equipment: Renishaw OMP 40-2 touch probe, BLUM Nano NT tool break control, coolant system, oil mist extractor, coolant filter, fire extinguishing system. Delivers tight tolerances; ideal for watchmaking, medical, aerospace, automotive and tooling. Bjdpfszqbhbex Al Asdh

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Bdedpoy Dcd Hsfx Al Ash

Condition: used, mileage: 261,000 km, power: 120 kW (163.15 HP), first registration: 05/2012, fuel type: diesel, overall weight: 4,800 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 5, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 516 WAS ambulance body internal no. 946 Financing or rental possible very, very good, immediately ready for use / vehicle has been refurbished, no dents or scratches / delivery possible for an extra charge / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x 12 V 88 AH battery / engine preheating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light at the rear, external connection 220V / fire extinguisher / center armrest / reversing camera / reading light / radio pre-wiring / optical signaling system / light bar & front flashing beacon, acoustic signaling system. Bdodskktyujpfx Al Ajh Financing or hire purchase possible!!! Our used special vehicles are inspected, refurbished, and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or DEKRA seal is as natural as the immediate operational readiness of all ambulances. The vehicle is almost like new!!! It has been completely overhauled!!! We offer a 12-month warranty on this RTW!!! Sold without medical and technical equipment, but this can be purchased separately. Our service - for you! * 20-40 immediately available RTWs always available at our premises * DEKRA or TÜV seal on request * FINANCIAL SERVICE - financing, leasing or hire purchase can be tailored to your individual needs * WARRANTY - possible for up to 36 months for an extra charge * Accident replacement vehicles in stock * REFURBISHMENT - all vehicles are professionally prepared for you by our team * You can find more vehicle offers and service details at: We look forward to your call / The G&G team is always available to assist you. We speak Italian, English, Polish, and Spanish and can certainly help you if you are looking for a good used RTW. This advertisement serves only as a preview of our vehicle and is not part of a purchase contract. Information provided on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, and data transmission errors. Changes and prior sale reserved!

Condition: used, mileage: 149,000 km, power: 120 kW (163.15 HP), first registration: 03/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 4, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 516 ambulance, in very good, immediately operational condition / vehicle has been refurbished, no dents or scratches / delivery possible for an extra charge / ABS + ASR, ESP / 2 airbags / electric exterior mirrors / electric windows / 2 x 12 V 88 Ah battery / engine pre-heater / auxiliary heater / power steering / reinforced stabilizer bar / tachograph / air conditioning / immobilizer / work lights at the rear, external 220 V connection / fire extinguisher / center armrest / reversing camera / reading light / radio preparation / optical signaling system / light bar and front flashing lights, acoustic signaling system. Financing, rental, or lease-purchase possible!!! Our used special vehicles are inspected, refurbished, and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or DEKRA certification is as natural as the immediate operational readiness of all ambulances. The vehicle is almost like new!!! We offer a guarantee of up to 24 months on this RTW!!! Sold without medical and technical equipment, but this can be purchased separately. Our service – for you! * 20-40 immediately available RTWs, always available in our warehouse. * DEKRA or TÜV certification available on request. Bdsdpokkt Alefx Al Aeh * FINANCIAL SERVICES – financing, leasing, or lease-purchase, tailored to your individual needs. * GUARANTEE – possible for up to 36 months for an extra charge. * Accident replacement vehicles in stock. * REFURBISHMENT – all vehicles are professionally prepared by our team. * You can find more vehicle offers and service details at: We look forward to your call / The G&G team is always available. We speak Italian, English, Polish, and Spanish and can certainly help you if you are looking for a good used RTW. This advertisement serves only as a preview of our vehicle and is not part of a purchase contract. Information provided on the internet is non-binding and does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, and data transmission errors. Changes and prior sale reserved!

Condition: used, mileage: 279,000 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 516 WASKoffer /// 6-speed transmission!!!!! For export to Ukraine, including customs registration and insurance. Very good condition, immediately ready for use / vehicle has been refurbished / delivery possible for an extra charge / accident-free / ABS + ASR, ESP / 2 airbags / electric exterior mirrors / electric windows / 2x 12 V 88 Ah battery / engine preheating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light at the rear, external connection 220V / fire extinguisher / center armrest / reversing camera / reading light / radio preparation / optical signaling system / light bar & front strobe, acoustic signaling system. Our used special vehicles are inspected, refurbished, and maintained by an experienced team of service technicians from the special vehicle industry, ensuring that the vehicles are immediately ready for use. Bdedskkt Dqopfx Al Aoh The vehicle is like new!!! We offer a 24-month warranty on this RTW!!! Financing or lease purchase possible!!! Sale without medical and technical equipment, but this can be purchased separately. Errors and prior sale excepted. Errors are possible; we only sell according to our general terms and conditions / according to § 25a / no sales tax. We speak Italian, English, Polish, and Spanish and can certainly help you if you are looking for a good used RTW.