Used Yamaguchi Wb 12 H for sale (67,663)

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Lhjdpfx Asukvgredtof Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616004, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616004 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade Lhodpfx Aswd I Idodtof ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. Lhsdot Uzv Tepfx Adtof This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: new, fuel type: diesel, tire size: 13R22.5, axle configuration: 6x6, wheelbase: 4,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2024, Equipment: air conditioning, = Additional options and equipment = Ledovuzrxopfx Adtohf - Leaf suspension = Notes = Fuel tank: 390 ltr. Air conditioning = Further information = Transmission: ZF16S2520TO, manual gearbox Year of manufacture: 2024 Tyre size: 13R22.5 Suspension: Leaf suspension Front axle: Steered Gross vehicle weight: 33,500 kg

Condition: good (used), Dust suction hood 100 mm Motor output 0,55 kW Air consumption 1150 m³/h Lodsyw Tlnspfx Adtshf Dimensions (L/W/H) 880 x 520 x 1640 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,272 h, load capacity: 16,000 kg, lifting height: 8,200 mm, free lift: 4,100 mm, fuel type: diesel, mast type: duplex, construction height: 5,750 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,720 kg, total length: 5,313 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Lodpfx Adsu Dzaletjhf Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 Description: In addition to this Kalmar model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this DCG 150-12 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab, air conditioning, full free lift, swivel seat

Condition: used, axle configuration: > 3 axles, first registration: 09/2004, total length: 16,800 mm, total width: 2,530 mm, total height: 1,750 mm, suspension: hydraulics, tire size: 295 / 80 / R22.5, color: red, Year of construction: 2004, General information Model code: ### Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: BPW ECoPlus Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Double wheels; Lift axle; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Max. axle load: 12000 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 4: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 5: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 21.680 kg Condition General condition: average Lhodpfsyvf Ecsx Adtjf Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), mileage: 802,174 km, power: 185 kW (251.53 HP), first registration: 04/2016, fuel type: diesel, tire size: 285 / 70 / R19.5, axle configuration: 4x2, wheelbase: 5,350 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,450 mm, total width: 2,360 mm, total height: 3,600 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, General information Cab: Comfort Cab Technical information Number of cylinders: 6 Engine capacity: 6.700 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tyre size: 285 / 70 / R19.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 5200 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 9800 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 6.175 kg Carrying capacity: 5.815 kg GVW: 11.990 kg Ledpfx Adjyu T Trjtjhf Functional Tail lift: Dhollandia DHSM.20, slider lift, 1500 kg Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spoilers - Stability control - Visor

Condition: used, mileage: 175,442 km, power: 130 kW (176.75 HP), first registration: 11/2010, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: orange, gearing type: semi-automatic, total width: 2,360 mm, total height: 3,230 mm, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, Unimog tractor unit with front and rear mower U400 - 405/12 * Unimog U400 * First registration: 11/2010 * Operating hours (display unreadable) * Mileage: 175,442 km (as indicated on the odometer) * 4,249 cc engine with 130 kW / 177 HP * Semi-automatic transmission * Driver’s cab with 3 seats * Tire size: 385/65 R 22.5, tread depth 7–13 mm * Wheelbase: 3,080 mm * Gross vehicle weight: 12,500 kg, unladen weight: 6,250 kg, axle load front: 6,700 kg, rear: 7,000 kg * ABS, radio, differential lock, power steering, wheel chocks * Dimensions (L x W x H): 5,100 x 2,360 x 3,230 mm * Dimensions with implements (L x W x H): 8,350 x 2,520 x 3,750 mm * Front mower Mulag RMK 300, year 2009, 2,442 operating hours, 530 kg * Rear mower Mulag MHU800, year 2004, 2,750 kg * Mower head Mulag RMK 1200, year 2009, 170 kg * 40 mm maul coupling * Front and rear PTO shafts * Front and rear hydraulics * Oil cooler leak Lhsdpfx Adoyxiunjtsf Further data and additional photos available upon request. This description does not constitute a binding offer and may contain errors. No guarantee on all details. Also visit our homepage at

Condition: used, Year of construction: 2020, operating hours: 12,536 h, Equipment: all wheel drive, Internal vehicle number: MK300023 German vehicle Immediately available at our yard in Kaufungen, Kassel Further information available from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HITACHI ZW 310-6 28 tons 12,536 operating hours Lhodpfx Asym H Rzjdtsf Financing example: * Internal number: MK300023 * Purchase price: €69,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,007.02 * Final installment (residual value): €13,380.00 If you are interested in this offer or wish to have it tailored to your requirements, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim Lhsdpfov Dauwox Adtsf

Condition: excellent (used), Year of construction: 2010, Control: Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 rpm Lsdpfx Adjywpfwetehf Tool magazine for 30 tools, SK 40 Through-spindle coolant 3D probing system

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Lodpjh R Taqsfx Adtehf

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) Ledpfx Ajmhhy Njdtohf - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: excellent (used), Year of construction: 2023, operating hours: 106 h, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, power: 185 kW (251.53 HP), gearing type: automatic, fork length: 3,000 mm, color: red, = Additional options and accessories = - Twin tires = Further information = Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Overall height: 370 cm CE marking: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000 KG @ 120 CM LOAD CENTER SHORT WHEELBASE = 475 CM FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM FRONT AND REARVIEW CAMERAS TIRE PRESSURE MONITORING CENTRAL LUBRICATION SYSTEM LED LIGHTING PACKAGE CHASSIS/BODY: - Tow pin - Steps with anti-slip protection - Rear-view mirrors on the left and right, mounted on the front fenders - Heavy-duty and protective fenders CABIN: - EGO cab - Clear and toughened safety glass windows, thickness 6 mm - Clear side windows including sliding windows in both doors - Full doors with locks left and right Lhedpov Hn D Ejfx Adtef - Full control panel right console with light control, rotary switch for display, levers for load handling system (electrically adjustable, dual function) - Multifunction lever on the left including horn, indicators - Brake system with pedals left and right - Interior comfort including mirror, handles, interior lighting, etc. - Front, rear, and roof window wipers and washers - Hydraulic steering including electrically height-adjustable steering wheel, manually adjustable sideways and lengthwise, with steering knob - External reversing lights - Tilt cab - Grab handle, left side - Automatic heating and ventilation (ECH) with fresh air filter - Cruise control pedal, right side - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, engine and transmission temperature, engine oil pressure, battery voltage, clock and date, hour meter, service interval display, speed, engine RPM, various pop-up information, AdBlue level STEERING SYSTEM: - Kalmar steering axle with double-acting steering cylinder DRIVELINE: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic engine speed increase when using the load handling function - Standard tilt angle 5° forward/10° backward ELECTRICAL SYSTEM: - Electrical system 24V - Rear and brake lights, LED - LED work lights on front fenders - 2 mast-mounted work lights - LED indicators including hazard warning - Master switch WHEELS: - Michelin 16.00x25

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 130 h, load capacity: 200 kg, mast type: telescopic, lifting height: 12,100 mm, platform length: 850 mm, platform width: 1,100 mm, overall weight: 2,550 kg, empty load weight: 2,550 kg, next inspection (TÜV): 08/2026, fuel type: electric, tire condition: 100 %, drive condition: 100 %, wheelbase: 1,900 mm, color: green, Equipment: UVV, differential lock, The aerial work platform was acquired in 08/2024. Self-propelled and fully electric. 12.1 m working height. 6 m telescopic outreach to the side. Due to its low tare weight, it can be transported on a 3.0 t trailer by car. Travel speed 6 km/h. The batteries last for several days under normal operating conditions. Non-marking, solid rubber tires. Controls are the same as all Nifty systems. UVV inspection is new. If required, the transport trailer can also be purchased, but it is not included in the price of the articulated boom lift. We would be pleased to provide you with an offer if interested. Lhsdpfx Aow Sgu Dodtjf

Condition: used, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, first registration: 12/2012, next inspection (TÜV): 08/2024, total width: 25,500 mm, suspension: air, tire size: 385 / 55 R 22.5 / 8mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 18,000 kg,

Condition: used, mileage: 24,691 km, power: 177 kW (240.65 HP), first registration: 04/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, all wheel drive, compressor, parking heater, Mercedes-Benz 1124AF 4x4 all-wheel drive fire engine LF16/12 according to DIN 14530, 177 kW/240 hp with 9 seats and auxiliary heating First registered: 04/1994 Mileage: 24,691 km ----* 6-cylinder OM 366 LA engine with 240 hp. * 6-speed manual transmission with low gear ratio * 2x differential locks (longitudinal and transverse) * ABS (deactivated via push button) * Warm air auxiliary heating * 90 km/h according to the documents * Compressed air connection for external filling of the brake system Lsdewawdgopfx Adtshf * Crew cabin with 9 seats, all with seat belts, including 2 emergency seats * Unladen weight: 7,610 kg. * Gross vehicle weight: 12,000 kg. * Small tow bar with 2000 kg towing capacity * Rotating beacons * Searchlights * 9R22.5 tires in good condition * Wheelbase: 3640 mm * Overall vehicle length: 7300 mm * LF 16/12 fire engine with mast body * 1270-liter fire water tank * Rosenbauer FP 16/8 centrifugal fire pump * Storage for generator in body * 1 spare wheel * Roof storage compartments for ladders and hoses ----TÜV valid until 11/2025 Good technical and visual condition, ready to drive and use immediately! Full service history! Perfect off-road base vehicle for a robust camper/expedition vehicle or other all-wheel drive vehicle applications. Subject to errors and changes!

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 1,183 h, load capacity: 1,200 kg, lifting height: 2,010 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 1,390 mm, fork length: 1,150 mm, drive type: Elektro, High lift pallet truck Load center: 600 Mast type: Standard Condition: Refurbished without warranty Technical condition: good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Lhsdpfeyx Nnuex Adtof Battery Ah: 375Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2009 Battery condition: 40 - 60% Description: Handover with new FEM 4.004 inspection. If you have any further questions, please feel free to call us. In addition to this model, we have about 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. We are happy to arrange leasing & financing as well as delivery at favorable conditions for you. Trade-in of Linde devices is also possible – even if you do not purchase a device from us. The indicated operating hours were read as of the date of entry. Subject to prior sale, changes, and errors. Full free lift,

Condition: used, mileage: 849,446 km, power: 331 kW (450.03 HP), first registration: 10/1994, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: red, gearing type: mechanical, number of gears: 12, emission class: euro2, suspension: steel-air, total length: 6,920 mm, total width: 2,550 mm, Year of construction: 1994, Equipment: ABS, electric window regulation, = Additional Options and Equipment = - Air suspension - Sun visor - Spotlights = Remarks = Scania T143.450 4x2 Dutch registration. 460 cm wheelbase. Alcoa wheels. Hose rack. Tear plate over the chassis. Rear bumper. Spotlights. Beacons. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Tyre size: 315/80R22.5 Brakes: Drum brakes Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: Leaf suspension Rear axle: Twin tyres; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: Air suspension Weights Unladen weight: 7,650 kg Payload: 10,350 kg Gross vehicle weight: 18,000 kg Financial Information Price: On request Identification Type number: T143.450 TOPLINE / TORPEDO / HAU = Company Information = Lhodpfox U S Ngox Adtjf ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Russian spoken. We strive to provide correct information, but no rights can be derived from the information provided in the advert.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 582 h, load capacity: 1,200 kg, lifting height: 5,300 mm, free lift: 1,740 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), drive type: Elektro, Reach truck Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, without warranty Technical condition: Very good Front tires type: Vulkollan Front tires size: Brand new Front tires condition: New Rear tires type: Vulkollan Rear tires size: Brand new Ledewm Swbepfx Adtehf Rear tires condition: New Battery voltage: 48V Battery capacity: 465Ah Battery manufacturer: Tested and inspected Battery type: PzS Battery year: 2016 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV), new battery, new tires. Completely repaired, serviced and checked, NEW Tires - Side-shifting mast

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Lodpfx Adsyvzl Hotohf Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: used, machine/vehicle number: XLK301227Y0028427, axle configuration: 3 axles, first registration: 09/2000, total length: 9,460 mm, total width: 2,450 mm, wheelbase: 7,520 mm, color: other, Year of construction: 2000, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.800 kg Carrying capacity: 35.200 kg GVW: 39.000 kg Registration number: OG-79-JS Lsdpfxeyr Nm Ne Adtjhf

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,564 h, load capacity: 1,200 kg, lifting height: 6,500 mm, free lift: 2,140 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load center: 600 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished without warranty Technical condition: very good Front tire type: Vulkollan Front tire condition: 80 - 100% Rear tire type: Vulkollan Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: overhauled and tested battery Lhsdpfjw N Trkox Adtjf Battery type: PzS Battery year: 2019 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift Mast traverse Safety light, beacon light Lift height display, 360° steering

Condition: used, - Dimensions LxWxH: 2150x1970x2730 mm - Model: LR-812-H - 2 trolleys: 800x600 - 360 baguettes - Baking surface: 19.2 m² - Refractory stone system - Power: 5 kW - Voltage: 400V - Rotating rack convection oven with integrated heat recovery and heat distribution to the interior through refractory stone walls 1- Exhaust duct 2- Convection turbine 4- Rotating mechanism 5- High-performance steam generator Lodoytc A Hjpfx Adtehf 6- Suction wall 7- Suspended rotating rack(s) 8- Insulation 9- Rotating tray