Used Zerma Granulator for sale (53)

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Nedpfsxtp Dijx Ahzocl Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Njdpfxek Tuxdj Ahzjcl Rotor width: 600 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 600 x 660 mm Drive motor: 30 kW

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. Ncedjghgbhspfx Ahzsl The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills for fine grinding of almost all thermoplastics. Typical tasks are the fine grinding of regrind or primary material from profile, pipe or sheet extrusion. In addition, these mills can be used in the food, chemical and pharmaceutical industries. Nedpfx Ahjghgb Njzecl The material is centrally fed by the stationary grinding disc with dosing element. Fine grinding takes place between the rotating and stationary grinding discs. The material is discharged by means of pneumatic suction.

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. Ncedpfx Aeghgdnjhzel The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes.

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm Ncjdpjghgdyofx Ahzel ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Wide range of applications for the ZXS series: Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled.

Condition: new, General: Ncjdpfx Aoghgd Dehzel The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Applications: Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator.

Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Injection Molding Thermoforming Blow molding Nsdpfoghgd Sox Ahzscl Recycling Extrusion Waste

Condition: new, Rotor diameter: 300 mm Rotor width: 600 mm Rotor blades: 3 x 2 Ncedpfswfig Djx Ahzol Stator blades: 2 Inlet cross-section approx. 300 x 600 mm Drive motor: 18.5 kW

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Grinding material transport: Njdpfx Aheghgbtjzecl The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: new, GENERAL Ncsdpfx Ahoghgdvjzsl Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc. Ncedpfx Ahjghgftezel

Condition: used, machine/vehicle number: 12897, Rotor diameter: 800 mm Rotor width: 1600 mm Rotor blades: 7 Nsdpjwbwwvefx Ahzocl Stator blades: 2 Inlet cross-section approx. 800 x 1600 mm Drive motor: 160 kW

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Rotor width: 400 mm Nodpfxowikaas Ahzscl Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 300 x 400 mm Drive motor: 15 kW

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA auxiliary mills of the GSL series 180/120 to 180/430 were developed as low-speed mills especially for applications in the injection moulding sector. They have a rotor diameter of 180 mm and working widths of 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be reground several times. Ncodpfoghgbdsx Ahzsl The material to be shredded is fed via a noise-reduced feed hopper of sandwich construction, which is available in different versions depending on the type of feed. Depending on the task, the side mills of this series are mounted on a low or high chassis and completed with a corresponding suction/outlet trough. Together with numerous options, the side mills are extremely variable in use. In addition to the usual advantages of all low-speed mills, such as low noise emission and almost dust-free grinding material, the GSL 180/120 to GSL 180/430 beside-the-machine mills are characterized above all by their knife, rotor, quick-snap system and by their good accessibility.

Condition: used, machine/vehicle number: 13237 13238, - Feed belt 0.75 kW - GSE 300/600 #13237 Rotor diameter: 300 mm Rotor width: 600 mm Rotor blades: 3 Stator blades: 2 Nedpfxjwbwxts Ahzscl Inlet cross-section approx. 300 x 600 mm Drive motor: 18.5 kW - MFT 20-250 Big Bag Extraction System

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Large panel and board sections Wooden pallets Waste from carpentry workshops Packaging wood Construction and demolition wood Veneers, MDF and chipboard Ncjdpfsghgdgsx Ahzol

Condition: used, machine/vehicle number: 12883, Rotor width: 800 mm Rotor blades: 5 Nodpfewbwqvex Ahzocl Stator blades: 4 Inlet cross-section approx. 500 x 800 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Ncedpfewbwvlex Ahzjl Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact cutting mills in the GSC series are completely soundproofed cutting mills and therefore particularly quiet. The integrated soundproofing ensures ideal accessibility to the cutting mill itself and for changing the blades and screens thanks to its well thought-out design. The noise protection is based on the use of the latest soundproofing materials. The housings, manufactured in a stable steel/welded construction, in conjunction with the V-cut rotors (except GSC 300/300), enable a long service life and universal applicability. The tangential housing geometry means that even bulky feed materials are easily accepted and shredded by the rotor. All machines in the GSC series always deliver high-quality ground material - regardless of whether the feed material is injection molding or blow molding waste, profiles, plates or films. The types in the GSC series are cost-effective, very reliable, easy to clean and have a long service life. Integrated sound insulation: The integrated sound insulation ensures a pleasant working environment with a low noise level. The optimal design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation makes the cutting mills compact and mobile. The machines can be transported to any location using a pallet truck or forklift. ZERMA offers a variety of options such as extraction systems, conveyor belts, metal detectors, fine material separators. Nodsghgbwopfx Ahzocl

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a supplement to the ZWS series. The series was designed as a cost-effective solution specifically for shredding wood residues in small and medium-sized wood processing companies. AT A GLANCE: Compact design Stable welded steel construction Large-volume hopper for material feeding Rotor made of solid steel with screwed knife holders PLC control for fully automatic operation Technical data SMART 600: Inlet 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 - 120 13 rotor knives Technical data SMART 600 S: Ncsdpsghgdcofx Ahzol Inlet 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 - 120 26 rotor knives

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross-section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross-section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross-section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross-section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross-section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross-section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 2,480 x 1,550 mm   ZHS - economical all-rounders The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.   Technical details: Njdpfx Ahsghgdkszocl Roller-bearing hydraulic slide with horizontal movement Screwed knives and knife holders Optionally with segment base for particularly thin parts and materials Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces Can be combined in a 2-stage system with a cutting mill as a pre-shredder

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. Ncodpsghgd Iofx Ahzol These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are extremely stable machines for the toughest demands and tailored to the versatile requirements of a modern recycling operation. The housings, manufactured in heavy steel/welded construction, withstand even extraordinary loads. Bearing, blade mounting and rotor shaft are far oversized and therefore extremely resilient. By simple retooling, massive lumps and thick-walled pipes as well as hollow bodies and foils can be shredded effortlessly. Depending on the individual task (and also for temperature-sensitive materials), different rotor variants are available, but they all have one thing in common: the modern and superior V-cut technology. All machines of the GSH series always deliver a high-quality regrind - whether from bottle crates, profiles, sheets, foils, or start-up lumps and tubes. They are economical, very reliable, easy to clean, and have a long service life. In combination with the extensive range of ZERMA options, accessories (such as extraction systems, conveyor belts, metal detectors, fines separators, roller feed systems, etc.) as well as spare parts, an individually optimized size reduction system is created. The advantages are shown in a considerably reduced effort in terms of costs, time and personnel. Sophisticated housing design The housing is divided diagonally in the middle and the upper part with feed hopper can be opened hydraulically so that the rotor is completely exposed for knife changes and cleaning. The sieve insert is also held by a hydraulically swiveling sieve basket, and accessibility is thus optimal for removal and installation of the sieve. Reversible sieve insert. Robust external bearing Nsdoghgflspfx Ahzjcl Another well thought-out design feature is the bearing arrangement outside the machine. Robust roller bearings in steel bearing housings guarantee a long service life and are ideal for the toughest conditions. The external bearing prevents grease from entering the grinding chamber, and vice versa, grinding material or fines from entering the bearing. This is another significant advantage, especially when the machine is operated in wet conditions. Flywheel In order to compensate for shock loads during comminution, a flywheel is available as an option. For attachment, the rotors have a second shaft end as standard. High operational reliability All granulators comply with EC machinery directives and are CE marked. Accident safety is ensured, for example, by overrun protection devices with limit switches and hydraulically unlockable check valves.

Year of construction: 2024, condition: new, Slow-speed, side-by-side granulator Rotor diameter (mm) 180 Rotor width (mm) 180 Rotor speed (rpm) 150 Drive (kW) 3 Number of rotor blades 18 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 140 The slow-speed side-by-side granulators of the GSL series are primarily used in injection molding and blow molding for the inline reduction of sprues and defective parts. Various hopper and extraction systems allow the machines to be flexibly integrated into existing installations. GSL 180 For the comminution of sprues from injection molding and blow molding Ncsdpeqmik Ijfx Ahzel Highlights of the GSL series: Low noise thanks to the low rotor speed, angled cut, and soundproof hopper in a multi-layer sandwich design. Powerful and efficient drive thanks to a brand-name gearbox. Easy maintenance, cleaning, and knife replacement. The slow-running, stand-alone granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm to 430 mm. The rotor consists of individual discs directly connected to the spur gear unit via an oversized drive shaft. This enables efficient and low-maintenance power transmission. The material to be crushed can be fed by hand, by conveyor belt, or by robot via a generously dimensioned, soundproof hopper in a sandwich design. The granulator is mounted on a low base frame on casters as standard. The mill is emptied via an extraction tray inserted beneath the screen with a pipe connection for a suction conveyor. Applications The slow-running, stand-alone mills of the GSL 180 series were specifically developed for the size reduction of sprues from injection molding and blow molding. Easy accessibility allows for quick color and material changes. The low rotor speed also allows for the processing of both soft and hard materials, ensuring good material quality with low dust content.