Used Zero Point for sale (7,944)

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2205, grinding wheel diameter: 350 mm, grinding wheel width: 5 mm, mount diameter: 75 mm, Power Supply: 400 V / 50 Hz Power Rating: 70 kVA Fusing: 3 x 125 A Conductor Cross-Section: 5 x 25 mm² Cu Workpiece Diameter: ⌀ 5 – ⌀ 50 mm Workpiece Length: 50 – 300 mm Manual loading and unloading External fully automatic loading device Workpiece headstock fixed on grinding table Workpiece Spindle Unit: Dimensions: ⌀ 135 x 400 mm Lubrication: Permanent grease lubrication Bearing Seal: With air purge Drive: With HF motor Special Mount: Junker standard flange ⌀ 75 mm Dkedpewfg Rgefx Adajw Max. Speed: 6000 rpm Tailstock: Longitudinal Adjustment: Manual Rotating Center: Junker standard flange ⌀ 48 mm (⌀ 75 mm) Grinding Table: Feed: Z-axis Grinding Spindle Headstock: Infeed: X-axis Horizontal Swivel: B-axis HF Grinding Spindle Units I, II, III: Dimensions: ⌀ 165 x 350 mm Flange: ⌀ 190 mm Standard Flange: ⌀ 127 mm Lubrication: Permanent grease lubrication Bearing Seal: With air purge Drive: 8 kW Balancing: Electronic Max. Speed: 8800 rpm Grinding Wheels I, II, III: Type: Borazon (CBN), ceramic bond Diameter: ⌀ 350 mm Bore: ⌀ 127 mm Coating Width: Max. 5 mm (standard) Peripheral Speed: Max. 140 m/s

Condition: used, Year of construction: 1997, functionality: fully functional, BOBST Domino 90-A1 Folder Gluer for sale! Year 1997 Dedpfsxnzq Djx Adaskw Cold glue system ERO with 4 glue guns Max width 900mm Min width 126mm Max speed 400m/min

Condition: used, Year of construction: 2009, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 4007342, pressure dew point: 3 °C, pressure (max.): 14 bar, Equipment: type plate available, Beko Drypoint RA 120, for collection, location Hildesheim 31137, still connected, test run possible Dksdpfow Slhpjx Adajw

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. Dsdpswz Ry Dofx Adaskw The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min Dsdpewbi Hcefx Adaekw pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: good (used), Year of construction: 2015, Energy Saving Refrigerant Dryer Dkedpfx Adsg A Hcxjaew Build in 2015 Pressure 14 bar

Year of construction: 2024, condition: like new (used), For sale due to process change: Compact, semi-stationary, electrically driven drum screening machine for screening excavated material, soil, stones, construction debris, or other screenable material! Type: GREMAC eZero Year of manufacture: 2024 Location: North Rhine-Westphalia Operating hours: approx. 200 hours Available from: Short-term, upon request Drive: Electric motors, alternatively by generator (gasoline/diesel) Supply voltage: 380 - 420 V / CEE-16A Drum length: 2,000 mm Drum diameter: 1,000 mm Screening area: 6.2 m² Bunker: 1.3 m³ Weight: 1,500 kg Mesh size: 20 mm² Screening technology Made in Germany. The GREMAC eZero impresses with its hot-dip galvanized frame and high-quality materials, ensuring a long service life. Dkodsv Iyx Repfx Adaow Machine Condition: - As new - Very well maintained The machine is sold in its original condition at the time of delivery. The seller assumes no liability for defects. Subject to prior sale and technical changes. All information is subject to change without notice.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 2009-0030, pipe diameter (max.): 51 mm, pipe length (max.): 4,500 mm, bending angle (max.): 180 °, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Primary application: Production of titanium tubes (2 inch). Tube properties Dimensions: 2" (50.8 × 0.71 mm) Material: Titanium Ti - P99002 (welded tube, not for hydraulic applications) Bending ratio: 1.5 x D (1.0 x D technically feasible) Tube retraction length: 4500 mm Bending properties Operation: In one plane or as rotary draw bending of tubes and profiles. Bending angle: max. 180° + springback (with overbending of 20-30° due to springback of the titanium). Axes and control Bending axis Dkjdpfsu Tqplex Adaew CNC axis with bending angle: 0 - 180° + springback Accuracy: ±0.1° Bending speed:

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical components completely renewed. TECHNICAL DETAILS Pipe diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Pipe length: 1,500 mm Bending angle: max. 180° + springback Pipe length: 400 - 1,500 mm Pipe outer diameter: 28 mm - 60 mm Material parameters Tensile strength of stainless steel: max. 750 N/mm² Tensile strength of mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel movements Bending direction: left Bending speed (forward travel): max. 22.0 rpm (infinitely adjustable) Bending speed (reverse travel): constant 22.0 1/min Twisting angle: max. 360° Twisting speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Stop time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic filling volume: 340 l Control system Bending levels: up to 6 (CNC-programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operating and control panel Dsdpfx Adswlpt Djaskw EQUIPMENT - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec pipe magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction - Various bending tools for Ø 60 mm pipe - Various auxiliary tools - Cooling unit for control cabinet - Foot control (2-way) - Schwarze-Robitec control panel - Cooling unit for control cabinet Rittal type SK 3361100 Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.

Condition: used, Year of construction: 2006, Technical details: grinding diameter: 5-55 mm grinding length: 500 mm total power requirement: 44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Djdpfx Adevg Thisaokw Centre height: 200 mm Grinding length: 500 mm *

Condition: used, Year of construction: 1978, Year ca. 1978 für Stangenprofile und... ... für Flachmaterial material thickness max. 24 mm working length 300 - 600 mm efective widths 3 mal 170 mm drive motor 400 V, 11 kW, 50 Hz . +++++ Please note: Dodpjirf Imofx Adaskw The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: M04I/9012, Offer Number: M04I/9012 Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Dkjdpfjwzkn Isx Adaew Type: SKM 08 Constr. year: 2011 diameter range: 2-8 mm shaft length under head: 150 mm output pieces/min: 70-300 Location: Germany

Condition: used, Bar pointing/chamfering machine PAREX Dodpexdnwpsfx Adajkw

Year of construction: 1986, condition: like new (used), More information on request Dodpohmfnhofx Adajkw

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, revolving centering points 4 pieces -Type: Röhm 158 MK4 / Bokö Perfekt 4P / 2x without type designation -Recording: MK4 -Price/Delivery: complete -Transport dimensions: 230/210/H70 mm Dsdpfxewvg Nwj Adajkw -Total weight: 8.2 kg

Condition: used, Year of construction: 1990, Folding tap pointer . tube diameter 5 - 20 mm tag length 50 - 100 mm total wight 1,4 t +++++ Dksdpfxjit Ewfs Adaew Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M04L/4099, Offer Number: M04L/4099 Machinetype: pointing machine Make: HILGELAND Type: PN1 Constr. year: 1968 diameter range: 2-6 mm shaft length under head: 5-50 mm output pieces/min: 180 Dkodowi Tcdspfx Adaow Location: In our warehouse

Year of construction: 2004, condition: excellent (used), Type: HRA4/80-4 Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm Dedehmfh Hspfx Adaekw

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 -Price/Delivery: complete -Transport dimensions: 390/360/H120 mm Dksdowvgwhjpfx Adaow -Total weight: 33.1 kg

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M04L/5692, Offer Number: M04L/5692 Machinetype: pointing and pincing machine Make: INGRAMATIC Type: PA2 Dodpfxjwi Tb Ho Adajkw Constr. year: 1976 diameter range: 1,7-6,4 mm shaft length under head: 4,5-75 mm output pieces/min: 1000 Location: In our warehouse

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm / unknown, rotating centering points 3 pieces -Type: Röhm 110HVL MK5 / 2x without type designation -Recording: MK5 -Price/Delivery: complete Dkodpswvgqhofx Adaew -Transport dimensions: 280/270/H95 mm -Total weight: 14.3 kg

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M04L/6382, Offer Number: M04L/6382 Machinetype: pointing and pincing machine Dkjdpfx Ajwi Tbmedajw Make: INGRAMATIC Type: PA3 Constr. year: 1977 diameter range: 4-8 mm shaft length under head: 40-110 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: M04L/7486, Offer Number: M04L/7486 Machinetype: pointing machine Make: PELTZER-EHLERS Dkjdpfxowi S T Ie Adaow Type: NBAM-16 Constr. year: 1975 diameter range: 16 mm shaft length under head: 25 -160 mm output pieces/min: 110 Location: In our warehouse

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M04L/8411, Offer Number: M04L/8411 Machinetype: pointing machine Dkjdpfx Adswi S Dmsasw Info: vibratory feeder Make: HILGELAND Type: PN4 Constr. year: 1985 diameter range: 6-12 mm shaft length under head: 12-130 mm output pieces/min: 150 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M04L/8429, Offer Number: M04L/8429 Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: PN6 Djdpfx Aswi S Dasdajkw Constr. year: 1970 diameter range: 20 mm shaft length under head: 180 mm output pieces/min: 90 Location: In our warehouse